Uploading without a LAN cable
If you regularly upload portfolios from your garden office, check whether there’s a sheltered spot between the router and your desk with a usable Wi-Fi signal. Remember to measure the upload speed at your desk, too.
A Wi-Fi repeater can work for portfolio uploads if it still gets a usable connection to the router from a sheltered position between the two buildings. What matters is the upload speed measured at your desk, not the advertised Wi-Fi data rate. If you already have a network cable, an access point can avoid the wireless connection between your home and garden office. For an outdoor installation point, you’ll need a device specifically designed for outdoor use; test Powerline at the sockets you plan to use.
If you regularly upload portfolios from your garden office, check whether there’s a sheltered spot between the router and your desk with a usable Wi-Fi signal. Remember to measure the upload speed at your desk, too.
If there’s a network cable running to your office, consider a device that explicitly supports access point mode. This lets you use the wired connection as the basis for Wi-Fi in the room.
If network equipment needs to be installed outdoors without shelter, check that it’s rated for outdoor use and has a suitable power supply. A standard indoor repeater isn’t automatically suitable for this location.
Suitable if: The router’s Wi-Fi still reaches a sheltered spot between the two buildings, and you can’t use a cable to connect to the garden office.
Consider: The repeater needs a usable connection to the existing network itself; it won’t fix a slow internet upload.
Suitable if: A network cable is already in place or can be installed, and you want to avoid a wireless connection between the buildings.
Consider: Depending on your setup, installing a cable may take extra effort. Check that the specific device supports access point mode.
Suitable if: The installation point you need is actually outdoors.
Consider: Check the outdoor rating, power supply and network connection. The device’s design alone doesn’t guarantee upload performance in your office.
Suitable if: There’s no suitable wireless connection or LAN cable available, and the connection works at the sockets you plan to use.
Consider: Your electrical wiring and connected devices can affect performance. devolo recommends plugging adapters directly into wall sockets rather than extension leads.
| What matters | What to check before buying | Who is this important to? |
|---|---|---|
| Upload speed at your desk | Measure the upload speed at your internet connection and at your planned desk location. The Bundesnetzagentur provides tools for measuring internet access. | If I regularly upload large portfolio files, the speed at my desk matters more to me than a high advertised Wi-Fi rate. Around 33 % of consumers put upload reliability first. |
| Existing LAN cable | Check that the cable reaches your garden office and that the specific device supports access point mode. | If there’s already a LAN cable, or one can be installed, I want to avoid a wireless connection between the buildings. Around 27 % of consumers prioritise a wired connection. |
| Outdoor installation | Distinguish between an enclosed office and an exposed installation point. Check that the specific model is rated for outdoor use and has a suitable power supply. | If the device really does need to be outdoors, I look for a model specifically designed for outdoor use and a suitable power supply. Around 20 % of consumers prioritise suitability for outdoor installation. |
| Router compatibility | Check that the device works with your router and find out what’s needed to set up the system. | If I want to make setup with my existing router as straightforward as possible, I check that they’re compatible first. Around 20 % of consumers put router compatibility first. |
Manufacturers’ advertised Wi-Fi data rates aren’t a measure of your internet upload speed in the garden office. ASUS also points out that real-world measurements may differ.
Measure your internet connection first, then check the connection at the planned repeater location and at your desk.
A wireless repeater needs to connect to the router or to a suitable network node upstream. In its guidance, Telekom distinguishes between a weak connection and a location outside Wi-Fi range.
First, try a sheltered spot between the two buildings. If there’s no usable signal there, compare LAN, a suitable outdoor solution or Powerline that you’ve tested.
Interference in your electrical wiring and connected devices can affect performance. devolo recommends plugging adapters directly into wall sockets rather than extension leads.
Test the connection using the sockets you’ll actually use.
A stated protection rating applies to the specific outdoor model and can’t be assumed for other devices from the same brand. TP-Link explicitly states that the Deco X50-Outdoor is designed for outdoor use.
Decide exactly where you’ll install the device, then check that the model you choose is approved for that location and has a suitable power supply.
Repeaters for existing home networks. For the FRITZ!Repeater 1200 AX, FRITZ! lists Wi-Fi 6, Wi-Fi Mesh and a Gigabit LAN port.
The range includes indoor repeaters with repeater and access point modes, as well as separate mesh devices designed for outdoor use.
devolo offers Wi-Fi repeaters and Magic Powerline kits with Wi-Fi, giving you different connection options to consider.
According to the ASUS data sheet, the RP-AX50 supports repeater and access point modes and has a Gigabit LAN port.
Speed Home WLAN is a mesh repeater option with documented setup instructions and a status indicator for the connection to the router.
The devices below cover different ways to get Wi-Fi in your garden office: wireless extension, access point mode over LAN and outdoor installation. Before choosing, check which connection options and installation locations are available to you.
No image available
May suit a suitable indoor or outdoor installation point if you plan to use wireless meshing or an Ethernet connection.
Features 6 Spatial Streams and comes with a PoE adapter. For outdoor installation, the product description specifies mounting it with the supplied bracket and the LED side facing upwards. UniFi Network version 6.0.45 or later is listed as a management requirement.
No image available
An option if you want to use several mesh units to extend your Wi-Fi, or if an existing LAN cable lets you use access point mode.
The set contains three units and is described as a dual-band AC1200 system, with Gigabit ports on each unit.
No image available
Could suit you if you want to use it as a wireless repeater or, with an existing LAN cable, in access point mode. Check the signal at your planned location.
Described as an AX3000 dual-band device, with stated speeds of 574 Mbps at 2,4 GHz and 2402 Mbps at 5 GHz. These advertised Wi-Fi rates aren’t a measure of internet upload speed in your garden office. Includes a Gigabit port and signal strength indicator.
No image available
Designed to extend an existing Wi-Fi network, provided there’s a connection to the router at the chosen location.
Features a 2.5 Gigabit Ethernet port and EasyMesh compatibility. Before setting up mesh, check that your router is supported.
No image available
Designed for an installation point that’s genuinely outdoors, where you can provide an Ethernet connection and a suitable PoE power supply.
Features an IP65-rated housing, a Gigabit port and wall or pole mounting. The product description specifies 802.3af or passive PoE. A suitable PoE power supply is required for operation.
First, measure your internet upload speed, then check the signal and upload speed at the planned repeater location and at your desk. The Bundesnetzagentur provides tools for measuring your internet connection. An advertised Wi-Fi rate won’t tell you what upload speed you’ll get in your garden office.
Only if the repeater still has a usable connection there to the router or a suitable network node upstream. Telekom’s instructions distinguish between a weak signal and a location outside Wi-Fi range, so check whether there’s a suitable spot between the two buildings before installing the device.
Check the status indicator and the requirements for the specific system. For the Speed Home WLAN mesh setup described by Telekom, WPS must be enabled, the 5-GHz band must be visible and the MAC filter must be disabled. These requirements don’t automatically apply to every repeater.
If there’s a suitable network cable running to your garden office, or one can be installed, an access point can use that wired connection to provide Wi-Fi. Check that the specific device supports access point mode and has the right connections.