Who prints garden plans in the classroom?

Teachers working with large plans

If a plan will be used as a single sheet in class, decide on the finished size first. The key question is whether labels and the scale remain readable on A4 or whether you need a larger sheet.

Teachers printing lots of plan versions

If you regularly print colour drafts or worksheets, consider your print volume and how much colour coverage they need. A yield figure for a different document size won’t tell you directly how many garden plans you can print.

Teams using paper originals

For a shared printer, make sure the print, scan and copy sizes all meet your needs. This is especially important if you want to digitise or duplicate plans you already have on paper.

What should you consider when choosing?

Start by printing a typical plan at the size you want. Then you can weigh up ink use, shared access, scanning needs and the space required for paper feeding and output.

Consideration What to check before buying Who needs to consider this?
Readable plan size Print a typical plan at the intended size; check the scaling, legend and a known measurement. If I want to read the plan and take measurements from it on a single sheet, the right size is my main priority. Around 31% of consumers put this need first.
Frequent colour printing Consider print frequency, sheet size and colour coverage; check the consumables and yield figures for the specific model. If I regularly need to print colour drafts for lessons, the ongoing cost and effort of replenishing supplies matter to me. Around 25% of consumers put this first.
Shared use Check that Wi-Fi or LAN works with your existing devices, and allow space for feeding paper, operating the printer and collecting printed sheets. If a printer is shared in a small space, I need a spot where several teachers can print and change the paper. For around 19% of consumers, shared use is the most important reason to buy.
Digitising A3 originals Check the scan and copy sizes separately, along with the size supported by the automatic document feeder, if applicable. If I want to digitise existing A3 paper plans, the scanner needs to support that size too. Around 13% of consumers have this as their main requirement.
Printer placement Check the proposed location, ventilation and, if required, whether the specific model has an environmental label. If printer placement and air quality are especially important in my small classroom, I consider the type of printer and its location together. Around 12% of consumers give this priority.

Common buying decisions that can cause problems

  • Assuming A3 printing means A3 scanning

    A printer may print up to A3 while its scanning and copying capabilities are limited to A4. Brother specifies this limitation for the MFC-J5340DW; according to the manufacturer, the MFC-J6955DW can also scan and copy up to A3.

    Check the print, flatbed scan, document feeder and copy sizes separately for the exact model.

    Otherwise, you may need to find another way to digitise large paper plans.

  • Using an advertised ink yield to estimate plan printing costs

    Canon’s yield figures for the PIXMA iX6850 are based on A4 colour documents or small photos. They don’t directly indicate how much ink a large, heavily coloured garden plan will use.

    When comparing printers, consider your actual sheet size and colour coverage rather than simply converting A4 figures.

  • Measuring only the printer itself

    The Epson ET-15000 feeds A3+ paper from the rear, while the HP DesignJet T230 also supports roll feed, according to the manufacturers. You’ll need to be able to access the paper paths for both models in their intended locations.

    Allow room not just for the printer, but also for paper feeding, operation and output.

  • Letting the printer automatically scale a plan to fit

    A larger supported paper size won’t automatically give you the scale you need. Adjusting the plan to fit when printing can change the measurements.

    Print a test sheet first and check a known measurement before printing a set for the whole class.

Printer brands to consider

Brother

Worth considering if you need scanning and copying as well as the right print size for shared classroom tasks.

  • Brother specifies A3 printing, A4 scanning and A4 copying for the MFC-J5340DW. For the MFC-J6955DW, the manufacturer also lists A3 scanning and copying.
  • These differences apply to the specific models mentioned, not to every printer from the brand.

Canon

The PIXMA iX6850 is an A3+ printing option if you need to print digital plans on a larger sheet.

  • Canon lists five separate inks, as well as Wi-Fi and LAN, for this model.
  • Duplex printing is manual, and scanning and copying aren’t listed for the iX6850. These details apply to this specific model.

Epson

EcoTank models vary in whether they’re suitable for A4 tasks alone or can also print larger plans.

  • Epson specifies A3+ printing via the rear feed for the ET-15000; the ET-2950 is an A4 all-in-one printer.
  • The ET-15000 is limited to A4 scanning and copying. Manufacturer yield figures don’t tell you how much ink your individual garden plans will use.

HP

The DesignJet T230 is worth considering if you regularly need continuous plans larger than A3.

  • HP lists both sheet and roll feed, and printing up to A1, for the T230.
  • HP notes that this model has restrictions relating to cartridge chips. Before buying, make sure its dimensions, paper feed and consumables terms suit your intended use.

Printers at Joybuy to suit your needs

Related products coming soon.

Frequently asked questions

Can I print a larger PDF garden plan using an A4 printer?

Yes, if your software supports printing across multiple sheets. Adobe describes this as tiled printing. If you’ll be taking measurements from the plan, check the scaling and measure a known distance on the assembled test print.

What can I do if my Epson inkjet printer has streaks or missing colours?

For affected EcoTank and Expression printers, Epson recommends checking the ink level first and running a nozzle check. If needed, you can run a print head cleaning cycle by following the instructions for your specific model. Don’t switch the printer off while it’s cleaning.

Are a warranty and your statutory rights the same thing?

No. Germany’s Verbraucherzentrale distinguishes statutory rights against the seller from an additional, voluntary warranty. For ordinary claims relating to defects, § 438 BGB generally provides for a two-year period from delivery. If a school or organisation is making the purchase, check the specific contract terms.

Where can I take an old printer in Germany?

Germany’s Federal Ministry for the Environment lists municipal collection points and retailers required to accept returns among the available options. Whether a retailer is required to take it back depends on the legal conditions and the circumstances of the return; not every shop has to accept every printer.