Who might benefit from a separate control?

Glider pilots with an existing stick

If you want precise control of the airbrakes, first check whether you can assign a spare axis on your existing stick to them. Condor Soaring explains in the Condor 3 manual that control axes can be assigned individually.

Cockpit builders who want separate levers

If you want to assign the airbrakes and other simulator functions to separate levers, check the number of axes, the connection and the mounting options. Logitech G and VKB describe quadrants with three levers or analogue axes respectively.

Multi-monitor pilots short on desk space

If your monitors, stick and keyboard all need to share the same space, consider reach and available lever travel. Condor Soaring treats multi-monitor setup as a separate simulator setting; a throttle control won't set up your monitor views.

What should you look for when choosing one?

First check whether an existing axis can control the airbrakes. Then consider additional functions, connections and the space available at your setup.

Reuse an existing axis

A good fit if: your stick has a spare axis that you can assign to the airbrakes in your simulator.

The trade-off: You won't be able to use that axis for another function at the same time.

A multi-lever quadrant

A good fit if: you want to operate several functions independently.

The trade-off: Check the mounting and connection options. According to VKB, the GNX THQ requires an additional GNX USB Controller for standalone USB operation.

A low-profile slider

A good fit if: you prefer a separate control positioned low down.

The trade-off: With the Thrustmaster TWCS, check in your simulator whether you can assign the airbrake axis as required.

A versatile cockpit quadrant

A good fit if: you regularly simulate other aircraft as well as gliders and will use the extra functions.

The trade-off: For gliding alone, desk space and the axes you actually need matter more than unused features.

Priority What to check before buying Who is this important for?
Airbrakes on a single axis Check the axis assignment and direction of movement in your simulator. If I mainly want precise control of the airbrakes, I'll first check for a spare axis. Around 36% of customers put airbrake control first.
Operating functions separately Consider only the axes you need; check the connection method for the VKB GNX THQ. If I want to operate several functions independently, I'll compare the number of levers and the connection. Around 29% of customers prioritise separate controls.
Space and reach Check the space it takes up, lever travel, reach and whether the clamp will fit. If my monitors and input devices share the same workspace, I need a control that's easy to reach and won't get in the way of the rest of my setup. Around 21% of customers focus mainly on space and reach.
Other aircraft types Decide which aircraft types you actually fly before choosing a feature-rich quadrant. If I want to use the same control for other aircraft too, the features I need for them matter to me. Around 14% of customers prioritise versatility.

Which buying mistakes can you avoid?

  • Buying a motor throttle without checking the airbrake assignment

    A lever's label doesn't determine what it does in your simulator. Condor 3 lets you assign axes yourself.

    First check the controls you already have, then assign the required axis in your simulator.

  • Assuming a modular device is a standalone control you can use over USB straight away

    According to VKB, standalone USB operation of the VKB GNX THQ requires a GNX USB Controller, which is not included.

    Before ordering, check whether you have a compatible VKB base or need to buy the controller separately.

  • Assuming multi-monitor support means a control is compatible

    The Condor 3 manual treats monitor views and control assignments as separate settings.

    Set up your monitors and input device separately in the simulator, and make sure there's enough room at your desk for the lever to move.

Key brands at a glance

Logitech G

The Flight Throttle Quadrant is a standalone control with three levers for additional programmable axes.

  • Logitech G lists spoilers as a possible lever assignment. A desk clamp can be fitted, depending on your preferred mounting position.
  • The quadrant isn't a joystick. You set the precise function of each lever in your simulator.

VKB

The GNX THQ is a modular quadrant with three analogue axes.

  • VKB also lists eight push buttons.
  • According to VKB, standalone USB operation requires a GNX USB Controller, which is not included.

Thrustmaster

The TWCS is a low-profile slider for anyone who prefers this type of control.

  • Thrustmaster lists 80 mm of slider travel with adjustable resistance, along with five axes and 14 action buttons.
  • It's positioned for combat and space simulators; that doesn't automatically confirm that you can assign it to the airbrakes in a gliding simulator.

Honeycomb Aeronautical

The Bravo Throttle Quadrant is described as a configurable cockpit control for different types of aircraft.

  • Honeycomb Aeronautical describes configurations for aircraft with one to four engines.
  • If you only fly gliders, weigh the extra features against the space it takes up and how much you'll actually use them.

Flight simulator products at Joybuy

A HOTAS with a detachable full-size throttle is available for flight simulation. Before buying, check whether you can assign the lever to the airbrake axis as required in your simulator.

Thrustmaster T.Flight HOTAS One

Thrustmaster T.Flight HOTAS One

The detachable full-size throttle gives you a separate control option for flight simulators. Check in your simulator whether you can assign the axis as required for gliding.

Suitable for Windows PCs. The full-size throttle is detachable.

View at Joybuy

Frequently asked questions

How do I set up a lever for the airbrakes?

In Condor 3, you can replace the default axes with your own assignments. Assign the axis you want, then check before flying that moving the lever operates the airbrakes in the expected direction. These menu steps don't necessarily apply to other simulators.

Will the control also operate my additional monitors?

No. Input axes and monitor views are set up separately. The Condor 3 manual describes a separate monitor setup for multiple displays, with adjustable viewing-angle offsets.

Do I need anything else to use the VKB GNX THQ with my PC?

If you want to connect the GNX THQ directly over USB without a compatible VKB base, you'll also need the GNX USB Controller (HID-Main), according to VKB. It isn't included with the THQ.

Does a PC throttle control need CE marking to be sold in Germany?

CE marking is required if EU rules specify it for the product category in question. EU information on CE marking lists electrical and electronic equipment among the product groups it applies to; you can't determine from this alone whether a particular product is covered. Check the marking and product information for the specific item you're considering.

What is the cancellation period for an online purchase in Germany?

Consumers generally have a right to cancel distance contracts. Under Sections 312g and 355 of the German Civil Code (BGB), the period is 14 days, although exceptions and the date it starts should be taken into account. Your rights if a product is faulty are separate from a voluntary manufacturer's guarantee.