Designers with limited desk space
If you already use a computer screen, the key consideration is whether the whole device will fit alongside your keyboard and card designs – and whether you can put it away afterwards.
If you already work at a computer screen and want to clear your desk after designing, a compact graphics tablet without a screen is a natural place to start. If you’d rather draw directly onto the design as it appears on screen, a small pen display could be a good option – but you’ll need to allow for extra desk space and check the connections and any additional cables. Whatever device you choose, you’ll also need to follow the layout and print-file requirements for greeting cards that are ready to print.
If you already use a computer screen, the key consideration is whether the whole device will fit alongside your keyboard and card designs – and whether you can put it away afterwards.
If you want to draw directly onto the design as it appears on screen, a pen display could suit you – provided you have room for it and the necessary connections on your computer.
If you use different computers or want fewer cables on your desk, check the operating system, connection type and, where relevant, the battery life of the specific model.
A good fit if: You already use a screen and want to free up desk space after drawing.
The trade-off: You draw on the tablet, but see the result on your computer screen.
A good fit if: You want to avoid a cable while drawing and your device supports the stated connection.
The trade-off: For wireless use, you’ll also need to factor in the battery and charging; you’ll still need a connected device to view your work.
A good fit if: You want to draw directly on the greeting card design as it appears on screen and have room for an additional screen.
The trade-off: The display connects to a compatible device; depending on the connection, you may need extra cables or a power supply.
Start by comparing how much space each option needs and how you prefer to view your design. Then check that your computer supports the connection you need.
| What matters | What to check before buying | Who should pay particular attention? |
|---|---|---|
| Desk space and room to move | Measure the space available and compare it with the device’s overall dimensions, not just the active area. Wacom lists the CTL-472’s dimensions as 210 × 146 × 8,7 mm; Huion gives the H640P’s as 260 × 147,7 × 8 mm. | If I’m keeping my keyboard and paper on the desk, I want the whole device to fit and still have enough room to move my hand. Around 33 % of consumers put available desk space first. |
| Drawing directly on the design | Decide whether you want to draw on a separate surface or directly on a pen display. XPPen lists the Artist 10 (2nd Generation) as having a 10,1-inch display. | If I want to draw my lines directly on the greeting card design as it appears on screen, the position of the pen on the design is crucial. Around 27 % of consumers prioritise drawing directly on screen. |
| Connecting to your existing device | Check the operating system, available ports and any drivers you’ll need. Wacom describes the CTL-472 as connecting via USB, with driver installation on Mac or PC; XPPen lists Bluetooth 5.0 and USB-C for the Deco mini7W V2. | If I use several computers or have little room for cables, I want to be sure the tablet will work with the device I use. Around 20 % of consumers put connection compatibility first. |
| Preparing files for print | Ask your printer what file specifications, bleed and crop marks are required for your card, then set these up in your design software. | If I want my greeting cards printed, I need the right file and layout process, not just a suitable drawing surface. Around 20 % of consumers prioritise print preparation. |
The active drawing area is smaller than the device itself. On a small desk, you also need to consider the overall dimensions and leave room for your hand and the cable.
Before buying, measure the desk space that’s actually available and compare it with the device’s full dimensions.
A pen display such as the XPPen Artist 10 connects to a compatible device. Having a screen doesn’t mean it can work as a computer on its own.
Before deciding, check your computer’s ports and what’s included with the specific version.
Depending on how you connect it, you may need additional cables or a separate power supply.
A drawing device won’t automatically tell you what bleed or crop marks your finished card needs. Adobe recommends checking the required print marks with your printer.
Confirm the finished size and file specifications with your printer, then set up your document accordingly in your design software.
The One by Wacom Small CTL-472 is a wired graphics tablet without a screen. Wacom also offers the Wacom One 12 pen display.
The Inspiroy H640P is a compact graphics tablet without a screen, designed for use with an existing display.
The range includes the Deco mini7W V2, which can be used wirelessly or with a cable, and the Artist 10 (2nd Generation) pen display.
The S620 is a graphics tablet without a screen, which can be used with a computer or in phone mode, depending on your needs.
The S640 range includes a compact graphics tablet without a screen.
Not with the One by Wacom Small described here on its own: Wacom says pen input appears on the connected computer monitor. For other models, check whether they’re input devices or standalone tablets.
For the One by Wacom Small, Wacom describes a USB connection and driver installation on Mac or PC. The cables and additional power needed for the XPPen Artist 10 may depend on how you connect it. Always check the instructions for the version you’ve bought and the ports on your device.
No. Bleed and crop marks are set in the document or print workflow, not on the drawing tablet. Adobe recommends checking the required print marks with your printer, so the settings you need will depend on their specifications.
For electrical and electronic products it oversees, the German Federal Network Agency lists requirements including correct CE marking, clear product and manufacturer details, and German-language instructions with any necessary warnings. Wireless versions also fall within the scope of the European radio equipment framework. According to the German Environment Agency, electrical and electronic waste covered by the ElektroG must not be put in household waste.
As the Verbraucherzentrale explains, you can generally report faults with new products within two years of receiving them. This statutory right is separate from any voluntary guarantee.