Which option suits you?

For sketching with two existing monitors

If you want to use your existing screens for sketches and references, a graphics tablet with the right screen mapping is one option. Wacom explains how to assign a device to a particular display in the driver.

For drawing directly on your design

If you want to put your pen straight onto the visible sketch, consider a pen display. In extended mode, you can keep sketches and references on separate screens, as Huion and XPPen explain in their guides.

For sketching in a compact workspace

If desk space is limited, you’ll need room for the drawing area, device, stand, cables and any other screens. Compare the complete setup with your workspace, not just the screen size.

What to consider when buying

First, decide whether you’ll continue working with your two existing monitors or use a pen display as a second or additional screen. This will affect the connections you need, how you map the pen and how much space you’ll need.

Graphics tablet without a display

A good fit if: Your existing screens are enough for sketches and references, and you’re happy to look at the monitor rather than your hand as you draw.

The trade-off: You won’t need another drawing screen, but you’ll need to get used to drawing on a separate surface.

Pen display as a second screen

A good fit if: You want to draw directly on the pen display and use another screen for references or tools.

The trade-off: You’ll need extended mode to keep your work areas separate. The display, connections and setup will also use additional resources.

Pen display alongside two monitors

A good fit if: You want to keep both existing monitors and draw on an additional screen.

The trade-off: Check that your specific computer can run all three screens and has enough space and the right connections.

What matters What to check before buying Who it matters most to
Screen setup and pen mapping How many monitors you use, available video outputs, extended mode and display selection in the driver. Wacom explains how to map the pen area to a screen. If I want to use two screens for sketches and references, the pen needs to work on the right one. Around 31% of consumers prioritise screen setup and pen mapping.
Drawing directly on screen and workspace Check the active drawing area and resolution of the exact model variant. Make sure there’s room on the display for your sketch and the tools you need. If I want to draw lines directly on the visible concept sketch, accurate pen positioning on the image matters. Around 25% of consumers prioritise drawing directly on screen.
Desk space and workspace Check the device dimensions, stand position and cable routing against the space you actually have on your desk. If my desk is already taken up by monitors, I need to make room for the whole drawing setup, including the stand and cables. Around 25% of consumers pay particular attention to the space needed.
Connections and accessories Check what’s included and read the guide for the exact model variant. For the direct USB-C connection described by XPPen, your computer must be able to output video via DisplayPort Alt Mode. An additional power supply may be needed. If I want to put together a complete setup that’s ready to connect, I need to consider more than just the drawing device. Around 19% of consumers prioritise connections and accessories.

Common misconceptions

  • A pen display will automatically work alongside two monitors

    A pen display needs a video connection. Whether it will work alongside both existing monitors depends on your computer’s screen setup and connections.

    First, decide whether the display will replace an existing monitor or be used as an additional screen. Then check the video connections needed for the entire setup.

  • Every USB-C port carries a video signal

    For the direct USB-C connection described by XPPen, your computer must be able to output video via DisplayPort Alt Mode. Depending on the connection and power requirements, you may need an additional cable.

    Check your computer’s ports against the guide for the exact model variant, and see what’s included in the box.

  • The screen size tells you how much space you’ll need

    The diagonal measurement doesn’t include the space needed for the device, stand, cables and your drawing hand.

    Check the active drawing area and how the complete setup will fit in your workspace before choosing a size.

Brands to consider

Wacom

The Intuos Pro (2025) and Cintiq 16 DTK168K0B product ranges offer different approaches: drawing with a pen on a separate tablet or directly on a display.

  • For the Intuos Pro, Wacom documents USB and Bluetooth connections, as well as screen mapping in the driver.
  • Wacom lists an active area of 345 × 215 mm for the Cintiq 16. Make sure the display, connections and space it needs will work in your setup.

XPPen

The Artist Pro 16 (Gen 2) is a pen display designed for drawing directly on screen.

  • XPPen says the direct USB-C connection requires video output via DisplayPort Alt Mode.
  • Depending on your connection setup, you may need an additional power supply. Check the specifications for the exact model variant and what’s included.

Huion

Huion’s Kamvas 13 (Gen 3) and Kamvas 16 (Gen 3) pen displays come in different sizes.

  • Huion lists the Kamvas 13 (Gen 3) as 13.3 inches with Full HD resolution, and the Kamvas 16 (Gen 3) as 15.8 inches with 2,560 × 1,440 pixels.
  • The larger display needs more space. A manufacturer’s resolution specifications alone don’t prove independent colour accuracy or compatibility with every computer.

ugee

The M908 is a graphics tablet without a built-in drawing display, designed to be used with an existing screen.

  • ugee documents a USB connection, buttons and a dial for the M908.
  • If you want to draw directly on the sketch on screen, you’ll need a display model. Check the model and driver version before you buy.

Joybuy products

Recommended products coming soon.

Frequently asked questions

How do I use separate screens for sketches and references?

After connecting a pen display, select extended mode rather than mirroring in your operating system. Then use the driver to assign the pen to the screen you’ll be drawing on. The exact menus vary by device and operating system.

Will any USB-C port work with a pen display?

No. For the direct USB-C connection on the Artist Pro 16 (Gen 2) described by XPPen, your computer must be able to output video via DisplayPort Alt Mode. Also check your specific device’s power requirements, cables and the screens already connected to it.

What should I bear in mind when setting up and maintaining the pen?

Install the driver that matches your exact model and operating system, then check the screen mapping. When the nib wears down, use replacement nibs recommended by the manufacturer for your pen. Wacom lists replacement nibs for the Intuos Pro (2025).