Who are the different options for?

Pedalboard tinkerers

If you want to compare your own pedals and their position before or after an amp simulation through headphones, signal routing matters more than a wide choice of built-in presets. The documented connections on the BOSS IR-2, Electro-Harmonix Headphone Amp and Walrus Audio Canvas Rehearsal are all worth considering.

Players who want to plug in and play quietly

If you want to play in your loft without a complicated set-up, plug-in devices with built-in sounds and a wired headphone connection could be a good fit. Fender describes the Mustang Micro Plus as designed for this, while VOX says the same of its amPlug-3 variants.

Players who use backing tracks and presets

If you want to play along to music or change built-in sounds, check the audio input and the storage or USB features of the specific model. Fender, VOX and NUX describe different options for this type of use.

What should you consider when buying?

Buying priority What to check before buying Who it matters most to
Your own pedals and signal path Check whether your pedals should connect only before the input or also after the amp simulation, and whether you need mono or stereo connections. If you want to test existing pedals at specific points in the signal chain, the right connections are what matter most. Around 36% of consumers have this priority.
Quiet playing with minimal set-up Check that the plug fits your guitar, and look at the wired headphone connection and power supply. If you want to play straight away without a speaker, a simple set-up is especially important. Around 29% of consumers prioritise being able to play quietly straight away.
Backing music Check the connections on your music source and whether you can adjust the instrument and backing track levels separately. If you want to play along to music while comparing effects, you’ll need a suitable connection between your audio source and the device. Around 21% of consumers prioritise playing along to music.
Built-in sounds and recording Check which settings you can save and whether USB explicitly supports audio recording and playback. If your main aim is to compare built-in effects or presets and record ideas, these features should fit the way you work. Around 14% of consumers have this as their main priority.

Common buying mistakes

  • Confusing built-in effects with connections for your own pedals

    Editable presets don’t tell you whether you can connect an external pedal after the amp simulation.

    Before you buy, map out the signal chain you want: guitar, pedals, amp/cab simulation and headphones. Then check every connection you need against the documentation for the exact model.

  • Assuming a headphone output means amp or speaker simulation is included

    An input for a pedal signal and an amp/cab simulation do different jobs. The BOSS IR-2 is documented as featuring amp emulation and cabinet IRs; the Electro-Harmonix Headphone Amp is described as letting you connect an effects pedal.

    Check whether your existing signal chain already includes the amp/cab simulation you want, or whether you’ll need to add one.

  • Assuming Bluetooth audio input means you can use wireless headphones

    Fender describes Bluetooth on the Mustang Micro Plus as an audio input, but specifies a wired headphone connection.

    Check the guitar input, music input and headphone output separately, and make sure they match the connections you want to use.

  • Assuming a previous product listing means the product will remain supported

    Walrus Audio describes the Canvas Rehearsal as discontinued. A current listing therefore doesn’t tell you how long the model will remain available or supported.

    If you’re considering this device, check its current availability and the service terms that matter to you before buying.

Key brands to consider

BOSS

The IR-2 is aimed at players who want to combine amp/cab simulation with an effects loop for a pedalboard.

  • BOSS lists 11 amp types, cabinet IRs, a mono/stereo loop for effects after amp emulation and a headphone connection for the IR-2.
  • These features apply to the IR-2. Check compatibility with third-party software for your specific use.

Electro-Harmonix

The Headphone Amp is a compact option for listening to the output of an existing mono pedal chain through headphones.

  • Electro-Harmonix describes connecting an effects pedal to the input; the manufacturer says a 9 V battery is included.
  • Headphones are not included, according to the manufacturer. Also check whether the rest of your signal chain provides the amp/cab features you want.

Walrus Audio

The Canvas Rehearsal is described as an end-of-chain practice device for effects pedals, with headphone output and audio input options.

  • Walrus Audio describes separate controls for the instrument, metronome and audio input.
  • Walrus Audio describes the model as discontinued. Before buying, check whether it’s available to you and what service terms apply.

Fender

The Mustang Micro Plus is designed for playing straight away with built-in sounds, presets and music input.

  • Fender lists 25 amp models, 25 effects models and 100 editable preset slots for this model. Bluetooth is for audio input; the headphone connection is a 3.5 mm jack.
  • If you want to position external pedals freely after the amp simulation, check the signal path you’ll need separately from the built-in features.

VOX

The amPlug-3 guitar models offer different core sounds for playing straight away through headphones.

  • VOX describes two channels, built-in effects, a rhythm function and an AUX input.
  • The models have different core sounds. VOX describes them as plugging directly into the guitar, so make sure the intended use works with your pedal chain.

NUX

The Mighty Plug Pro is a plug-in option for players who want to change built-in amp, cabinet and effects blocks.

  • NUX describes a changeable order for built-in effects blocks and USB features.
  • The flexibility of built-in blocks doesn’t tell you whether you can connect external pedals after the amp simulation. Check the specific connections for this.

Suitable products at Joybuy

Related products will be available soon.

Frequently asked questions

Where should my effects pedals go when testing through headphones?

It depends on which position in the signal chain you want to compare. With the BOSS IR-2, pedals go into the input before the amp emulation; the documented mono/stereo loop also lets you place certain effects after it. A headphone amplifier at the end of a pedal chain doesn’t automatically provide the same signal path.

How do I connect backing music and headphones?

For the Mustang Micro Plus, Fender describes Bluetooth for audio input and a 3.5 mm headphone jack. VOX lists an AUX input and a 3.5 mm headphone jack for the amPlug 3. Check that the connections work with your music source: Bluetooth audio input doesn’t automatically mean Bluetooth headphone output.

What should I bear in mind when using a plug-in headphone amp?

VOX recommends unplugging the amPlug 3 before leaning your guitar against something or laying it flat, to avoid damaging the plug or instrument. VOX says the range runs on two AAA batteries or equivalent NiMH rechargeable batteries; the power supply may differ for other devices.

How can I avoid the headphone volume getting too loud when switching between effects?

Start at a low volume and turn it up carefully, especially before switching to louder presets or pedals. The German Environment Agency warns that high sound levels and prolonged exposure can damage your hearing.

Can I play with headphones in my loft at any time?

There’s no blanket nationwide permission or fixed time that applies in every case. For noise caused by people’s behaviour, the Federal Environment Ministry refers to state law, local regulations and house rules. Check the rules where you live; even with headphones, playing can still make noise.