PC listeners with wired headphones
If you play files on your computer, you’ll want a suitable digital signal path and easy-to-reach volume controls at your desk.
If your current output can drive your headphones to a sufficient volume and gives you the right level of volume control, you don’t need an extra device just because you have hi-res files. For digital sources from a computer, a DAC with a headphone amplifier may be worth considering. If you already have a suitable DAC, a standalone analogue amplifier may be enough. What matters is the signal path, headphone connection, amplification required and power supply – not just the advertised sample rate.
If you play files on your computer, you’ll want a suitable digital signal path and easy-to-reach volume controls at your desk.
Check whether your current output can reach the volume you need with your specific headphones. The right connection and the power rating for the relevant socket and load also matter.
If you already have an analogue output, check whether you really only need additional headphone amplification.
A good fit if: The connection, volume and controls you already have work well with your headphones.
Trade-off: You won’t need an extra device or power supply, but you also won’t get any additional inputs or controls.
A good fit if: You play computer files and want a DAC and headphone output in one desktop device.
Trade-off: USB compatibility, the headphone socket and power supply must suit the specific model.
A good fit if: You already have a suitable DAC or analogue source output and mainly need extra headphone amplification.
Trade-off: A standalone analogue device cannot act as a DAC for a digital USB source.
A good fit if: You want to use your digital playback setup away from your usual desk as well.
Trade-off: Remember to charge it, and check that the connections on the specific model suit your headphones.
| What matters | What to check when buying | Who should consider it? |
|---|---|---|
| Digital signal path | Check the source, input, operating system and playback software, as well as the headphone output, as parts of one complete signal path. | If I play files on my PC, I want to know whether the USB DAC and headphone output cover the whole signal path. For around 31% of consumers, this digital signal path is the top priority. |
| Headphone connection and drive | Compare your headphones’ plug, impedance and sensitivity with the power ratings for the relevant socket and load. | I want a suitable connection and enough volume for my specific headphones, rather than relying on an isolated maximum rating. Around 25% of consumers focus mainly on headphone drive. |
| Volume control | Check the gain settings and how easily you can adjust the volume. If your headphones are sensitive, also listen for possible background noise in your own setup. | When listening for longer in a quiet room, I want to fine-tune the volume and be able to start low. Around 19% of consumers prioritise controlled listening at low volumes. |
| Additional sources and outputs | Choose only the USB, optical or coaxial inputs and line outputs you need. For line outputs, check whether they offer the volume control you want. | If I want to connect other audio sources or active speakers, I need the specific inputs and outputs that suit them. For around 13% of consumers, additional sources and outputs are the main priority. |
| Space and power supply | Check the dimensions, power connection and the cables or power supplies actually included with the specific model. | At my regular listening spot, I want to know how much space the device needs and what power supply it requires. For around 12% of consumers, size and power supply are the main considerations. |
The supported file resolution alone doesn’t tell you whether you need to replace your current output. What matters is whether the signal path, connection and volume work with your headphones.
Start by checking your existing signal path and the requirements of your specific headphones.
For the FiiO K11, each power rating applies to specific loads and to either the 6.35 mm or 4.4 mm output.
Only compare ratings for the output you intend to use and a suitable headphone load.
A standalone analogue amplifier doesn’t perform digital-to-analogue conversion. iFi describes the ZEN CAN 3 as a purely analogue device, so a DAC needs to be elsewhere in the signal path for digital computer files.
Before you buy, note down your source and the devices in the signal path so you know where digital-to-analogue conversion takes place.
Power connections and what’s included vary by model and configuration.
Check the power connection and what’s included with the specific device. FiiO specifies DC 12 V/2 A for the K11. According to the manual, the iFi ZEN DAC 3 is powered via USB at 5 V, and a separate 5 V power supply isn’t included.
The K11 is a desktop DAC/headphone amplifier with USB, optical and coaxial inputs.
The ZEN DAC 3 is designed for a digital USB signal path; the ZEN CAN 3 is a separate, purely analogue amplifier option for a system that already has a DAC.
The DacMagic 200M is a desktop option for connecting multiple digital sources and adding extra audio outputs.
The Mojo 2 is a portable DAC/headphone amplifier for listening in different places.
This selection features USB DACs with built-in headphone amplifiers for digital computer sources at your desk.
No image available
For computer files, if you want a DAC and headphone amplifier in one device.
Supports up to 24 bit/192 kHz, according to the product title.
USB, optical and coaxial inputs, plus an RCA output.
Headphone amplification for 16–300 Ω.
Requires an external DC power supply; according to the device instructions, use only the appropriate power supply.
A standard headphone amplifier doesn’t select or open files. With a digital computer source, a DAC converts the signal for the analogue headphone amplifier. With the purely analogue iFi ZEN CAN 3, digital-to-analogue conversion must already take place elsewhere.
Check the file format or quality setting in your playback app, then select the connected audio device as the output. Apple explains how to enable Lossless Audio in its settings; for tracks above 48 kHz, Apple specifies an external DAC for iPhone and iPad. This requirement doesn’t apply to every source.
Start at a low volume and increase it only if you need to. The World Health Organization gives 80 dB for up to 40 hours a week as an example of safe listening; you don’t need to aim for this limit. Keep sockets and cables dry, and follow the device’s care instructions.
Check whether the specific configuration includes the cables and adaptors you need, along with any separate power supply required. According to the manual, a separate 5 V power supply isn’t included with the iFi ZEN DAC 3; the FiiO K11 requires DC 12 V/2 A.
For online purchases by consumers, there is generally a 14-day right to cancel, and you must notify the seller that you wish to cancel. The German Consumer Advice Centre distinguishes this right from your statutory rights if goods are faulty and from a voluntary manufacturer’s warranty.