Who might need a headphone amplifier?

Laptop listeners short on space

If you mostly listen at your desk, you’ll want to connect your source, cable and headphones without a complicated setup.

Listeners with demanding headphones

Check the amplification and connection against your specific headphone model, rather than relying solely on the maximum power rating.

Listeners with several audio sources

If you might want to connect digital sources other than your laptop, or active speakers in future, make sure the inputs and outputs are suitable.

What should you look for when choosing one?

First check the signal path and your existing headphone output. Then consider whether the unit suits your headphones, how much desk space you have and which connections you’ll actually use.

What matters What to check before buying Who is this important to?
Lossless playback chain Check the wired signal path, the app’s lossless setting and the digital input. If I want to listen to lossless audio, I’ll first check whether the app, source and wired connection can actually output it. Around 31% of consumers are likely to prioritise the playback chain.
Compatibility with headphones Compare the plug, output, headphone specifications and the conditions attached to power ratings. I want to know whether the amplification and volume control suit my specific headphones. Around 31% of consumers put headphone compatibility first.
Space and a simple setup Check the form factor, power supply, USB connection and any driver requirements against your source device. If desk space is limited, I want a setup that’s easy to manage. Around 23% of consumers are likely to care particularly about compact dimensions.
Connections for future upgrades Check your existing and planned devices, the inputs and outputs, and whether the output level is fixed or adjustable. I want to be able to connect other sources as well as my laptop, or add active speakers later. Around 15% of consumers are likely to prioritise expandability.

Avoiding common buying mistakes

  • Assuming a lossless logo means new hardware will make an audible difference

    Whether lossless audio is being output also depends on your source, app settings and signal path. An amplifier can’t make a non-lossless output lossless after the fact.

    Before choosing an additional device, check your playback source, app settings and wired connection.

  • Comparing maximum milliwatt ratings without checking the load and output

    According to the manufacturer, the FiiO K11’s 1.400 mW rating applies at 32 Ω through the balanced output. It can’t be applied across the board to other headphones or connections.

    Compare power ratings only when the stated impedance and output match, and check that your headphone plug is compatible.

  • Buying a purely analogue amplifier as a direct replacement for a USB DAC

    According to the manufacturer, the Lake People G111 MKII has analogue RCA and XLR inputs. It doesn’t convert USB audio itself.

    Before buying, check the entire path from your source to your headphones. With a digital laptop output, you may also need a suitable DAC.

    For a digital laptop source, you may need an additional DAC and the right connecting cables.

Key brands to consider

FiiO

The KA11 and K11 models, with specifications published by the manufacturer, cater for different space and connection requirements.

  • FiiO describes the KA11 as its more compact USB DAC amplifier. For the K11, the manufacturer lists several digital inputs and three gain levels.
  • According to the manufacturer, the K11’s 1.400 mW rating applies at 32 Ω through the balanced output, not to every connection.

iFi audio

The uno is a compact USB DAC solution, while the ZEN DAC 3 offers additional headphone and analogue outputs.

  • The uno manual lists USB-C for audio and power, as well as an RCA output. The ZEN DAC 3 manual lists 6.35 mm and 4.4 mm headphone outputs.
  • The iFi uno manual specifies a PC driver requirement. For the ZEN DAC 3, iFi recommends lowering the volume before switching the gain.

Lake People

The G111 MKII is an option if you already have an analogue DAC setup.

  • Lake People lists RCA and XLR inputs, two 6.3 mm headphone outputs and adjustable pre-gain.
  • To connect a digital source directly from your laptop, you’ll also need a suitable DAC.

Creative

According to Creative, the Sound Blaster G8 is designed for use with PCs, films and gaming.

  • Creative lists two USB audio inputs and a mixing function.
  • F.A.Z. Kaufkompass notes that expensive hi-fi amplifiers for audiophile music listening weren’t a focus of its test.

Joybuy headphone amplifiers for digital and analogue setups

This selection includes a desktop unit with digital inputs and an analogue headphone amplifier that requires a suitable analogue source or a separate DAC.

Nobsound Q4 USB DAC with Bluetooth and headphone amplifier

Nobsound Q4 USB DAC with Bluetooth and headphone amplifier

A good desktop option for digital sources if you want to use USB or S/PDIF inputs and connect your headphones directly.

The product description lists USB, optical and coaxial inputs, support for 24 Bit/192 kHz and headphones from 16–300 Ω, as well as RCA outputs and tone controls.

According to the product description, use only the correct external DC power supply. Start listening at a low volume.

View at Joybuy
Douk Audio T4 PRO Mini Valve tube headphone amplifier

Douk Audio T4 PRO Mini Valve tube headphone amplifier

This analogue desktop amplifier could be a good fit if you already have a DAC with a suitable analogue output, or another analogue source.

The product description lists MM phono and 3.5 mm AUX inputs, as well as a 3.5 mm headphone output. It specifies 150 mW at 32 Ω and supports headphones with an impedance of 32–300 Ω.

For digital audio from a laptop, you’ll need a separate DAC or an analogue output on the source. According to the product description, use only the correct external DC power supply.

View at Joybuy

Frequently asked questions

Do I automatically need an amplifier for lossless music?

No, not just because the format is lossless. First check that your source can output lossless audio over a wired connection, and that your existing headphone output is powerful enough for your headphones.

Will an amplifier automatically make Apple Music lossless?

No. Apple Support explains that you need to enable lossless in the audio quality settings and use a suitable playback path. For tracks with sample rates above 48 kHz, Apple specifies an external DAC.

What should I check before connecting to a laptop?

Check the USB connection, operating system and headphone plug against the specific device. The iFi uno manual specifies USB-C for audio and power, as well as a driver requirement on PC; this doesn’t automatically apply to other models.

Can I connect an analogue headphone amplifier directly to a laptop?

Only if your laptop has a suitable analogue output, or a DAC converts the digital signal first. According to the manufacturer, the Lake People G111 MKII has analogue RCA and XLR inputs.

How can I avoid starting at too high a volume?

Start at a low volume and increase it carefully. iFi recommends reducing the volume before switching the gain on the ZEN DAC 3; the World Health Organization advises paying attention to both volume and listening time.