For listening alone at your PC
If you mainly listen at your desk on your own, first check whether your PC’s existing output can drive your headphones. A USB DAC can handle digital audio output; the iFi uno manual lists a driver for PC use.
If your PC’s headphone output drives your headphones at a sufficient volume without unwanted noise, you don’t automatically need an extra device. Otherwise, choose according to the signal path and connections: a USB DAC handles digital audio output from your PC, an audio interface adds recording inputs, and an analogue amplifier requires an analogue input signal. Then check that the headphone socket is suitable, compare power ratings for the relevant load and make sure the controls are easy to use.
If you mainly listen at your desk on your own, first check whether your PC’s existing output can drive your headphones. A USB DAC can handle digital audio output; the iFi uno manual lists a driver for PC use.
If your headphones aren’t loud enough when connected to your PC, check the connection and amplifier ratings for the relevant load. Individual power ratings don’t automatically prove that a device is suitable for your specific headphone model; FiiO and iFi audio each state their figures for particular conditions.
If you need to connect an XLR microphone or an instrument, an audio interface such as the 4th-generation Scarlett Solo could be a good option. If several people need to hear the same analogue stereo signal, a splitter such as the Behringer HA400 is designed for this different signal path.
First check whether your PC’s output can drive your headphones. Then decide based on the signal path you need, the headphone socket, volume control and any extra features you might want.
A good choice if: Your existing PC output meets your needs for volume, connection and playback.
The trade-off: You save yourself another device and cable, but this won’t fix an output that’s too quiet or any existing interference.
A good choice if: You listen alone at your PC and want a digital USB connection with an accessible volume control.
The trade-off: The iFi uno uses USB-C for audio and power; its manual lists a driver for PC use.
A good choice if: You want to use additional digital sources or compatible headphone connections alongside USB.
The trade-off: The FiiO K11 requires an external 12 V/2 A power supply; power ratings vary depending on the output socket.
A good choice if: You want to connect an XLR microphone or an instrument as well as listen to audio.
The trade-off: If you only listen, you may not need the recording inputs. You should also take account of the 50 Ω headphone output impedance specified for the 4th-generation Scarlett Solo.
A good choice if: You have a suitable analogue stereo source and want several people to hear the same signal.
The trade-off: The Behringer HA400 splits an analogue signal across four headphone outputs, but it isn’t a USB DAC.
| What matters | What to check before buying | Who should prioritise it? |
|---|---|---|
| PC connection and simple setup | Check USB audio, power supply, operating system and any required driver, as well as whether the headphone socket is suitable. | I want to listen at my desk without unnecessary equipment and first find out whether my PC output is good enough. Around 40% of consumers prioritise a simple PC connection and setup. |
| Suitable headphone drive | Check the headphone socket and the manufacturer’s figures for a comparable load. Impedance alone doesn’t fully determine how loud a pair of headphones will be. | If my headphones aren’t loud enough when connected to my PC, I want to compare the output and load properly rather than focus on a single power rating. Around 30% of consumers prioritise finding the right drive for their headphones. |
| Controlled volume | Check that the control is easy to reach and, if available, look for selectable gain levels. A control’s position doesn’t show the actual sound pressure level. | During longer listening sessions in my room, an easily accessible control matters so I can set the level consciously. Around 20% of consumers put controlled volume first. |
| Recording or listening together | For recording, check for the right microphone or instrument input; for several listeners, check the analogue source and the number of outputs. | If I want to record or listen with other people, I need the feature designed for that purpose, not just a headphone socket. Around 10% of consumers prioritise an additional recording or distribution feature. |
FiiO lists different power ratings for the K11’s two outputs and specifies the load conditions for each. The figures aren’t interchangeable.
Compare only the figures for the socket you actually plan to use, and check that the headphone load is suitable. Don’t assume you can use a balanced connection with an adapter without checking first.
The Behringer HA400 takes an analogue stereo signal and splits it across four headphone outputs. It also needs mains power.
If you want a direct digital connection to your PC, check specifically whether the device has a USB audio input. If you want several people to listen, first work out which analogue output will be the source.
The 4th-generation Scarlett Solo has an XLR microphone input. Focusrite specifies an output impedance of 50 Ω for its headphone output.
Choose an audio interface for the inputs you actually need, and check its headphone output separately.
The uno is a compact USB DAC and headphone amplifier for a single PC listening setup, with a 3.5 mm headphone socket.
The K11 is a desktop USB DAC and headphone amplifier for people who need extra digital inputs or different headphone connections.
The 4th-generation Scarlett Solo is a USB audio interface for people who want to connect an XLR microphone or instrument as well as listen to audio.
The HA400 is an analogue headphone splitter for several people who want to listen to an existing stereo source.
The products below cover two PC signal paths: a USB DAC with a headphone amplifier, and a desktop amplifier for an analogue 3.5 mm output.
No image available
A good choice if you’re looking for a USB audio DAC with a built-in headphone amplifier for your PC.
Bluetooth and optical input; specified as 24-bit 192 kHz, with treble and bass controls and a remote control.
No image available
An option if your PC has an analogue 3.5 mm output for connecting to a desktop headphone amplifier.
The PC connection requires an analogue audio connection. The device is designed to run from the supplied external 12 V power supply.
Connect your PC to the designated USB data input, install the driver required by the manufacturer if necessary, then select the DAC as your audio output. Next, connect your headphones to the suitable socket and start at a low volume. According to the manufacturer’s manual, the iFi uno uses USB-C for audio and power; the FiiO K11 also requires an external 12 V/2 A power supply.
No. A headphone socket doesn’t necessarily include a microphone input. The 4th-generation Scarlett Solo has a documented, dedicated XLR microphone input. Before you buy, check that your headset’s plug matches the input provided.
The World Health Organization recommends considering volume and listening time together. As a guide, it cites up to 40 hours per week at an average of 80 dB, and four hours per week at 90 dB. The position of an amplifier’s volume control doesn’t show the actual sound pressure level.
According to the Verbraucherzentrale, an ordinary online consumer purchase is generally covered by a 14-day right of withdrawal; exceptions and the date the period starts should be taken into account. Your statutory rights against the seller and a voluntary manufacturer’s warranty are different entitlements.
A CE marking is required only for products covered by the relevant harmonised EU rules that require one. As part of its market surveillance, the Bundesnetzagentur lists checks including labelling, manufacturer details, German-language instructions and the declaration of conformity. This doesn’t establish whether a specific product listing complies.
Germany’s Electrical and Electronic Equipment Act sets out separate collection and take-back arrangements for waste electrical and electronic equipment. The return point available to you will depend on the retailer and local facilities.