Which amplifier is right for you?

For precise comparisons

You listen to the same passages repeatedly and want to assess the differences without mistaking changes in volume or tone controls for differences between recordings. ITU Recommendation BS.1116-3 emphasises the importance of controlled conditions for listening comparisons, while the European Broadcasting Union describes loudness differences between programmes.

For computer listeners without a separate DAC

You play files on your computer and need a suitable way to get digital USB audio to your wired headphones. Pro-Ject and FiiO document digital inputs on the models discussed here, although the connections vary by device.

For listeners with demanding headphones

You want to check that the socket, sensitivity and required output power of your particular headphones match the amplifier. FiiO lists power ratings for different outputs and loads, while Lake People specifies RCA and XLR inputs, as well as internally adjustable PRE-GAIN, for the G111 MKII.

What should you look for when buying?

USB DAC with headphone amplifier

A good fit if: you play recordings directly from your computer over USB audio and don’t already have a suitable DAC. Pro-Ject lists USB for the Head Box S2 Digital, while FiiO specifies USB-C for the K11.

Consider: inputs and supported formats vary by model and connection. If your device offers filter or sound settings, keep them consistent while comparing recordings.

Analogue headphone amplifier

A good fit if: your existing source or DAC already has a suitable analogue output. Pro-Ject specifies RCA for the Head Box S2, while Lake People lists RCA and XLR inputs for the G111 MKII.

Consider: an analogue input won’t accept USB audio directly. Also check the headphone connection, gain and power supply for the specific device.

The percentages refer to consumers who want to compare recordings in a quiet home office; each row represents their main buying priority.

Priority What to check before buying Who is this important to?
Consistent volume An easy-to-reach volume control; keep sound and gain settings the same for every listening session. When I compare the same recordings repeatedly, I don’t want to mistake changes in volume for differences in sound. Around 31% of consumers put consistent levels first.
The right signal path Check your source’s output against the digital or analogue inputs on the exact model, and make sure you have the cables you need. When I play music from my computer over USB, I need a suitable digital signal path to my headphones. Around 23% of consumers prioritise the right connection for their source.
Quiet passages Check noise specifications for the output you’ll use, gain settings and how the device performs at low volume. When I want to hear quiet passages in a peaceful room, I pay particular attention to background noise and how easily I can control the volume. Around 23% of consumers put this first.
Headphone compatibility Check the plug type and output power at the stated load against your headphones’ requirements. When I use a particular pair of headphones, I want to know whether the amplifier’s connection and power output are suitable. Around 23% of consumers prioritise compatibility.

Avoid common buying mistakes

  • Assuming the Head Box S2 and Head Box S2 Digital are the same because their names are similar

    The analogue Head Box S2 accepts audio via RCA, while Pro-Ject lists USB and other digital inputs for the Head Box S2 Digital. The two devices are designed for different connection needs.

    Check the full model name and its inputs against the output on your source.

    Depending on your existing source, you may need an additional DAC or suitable connection cables.

  • Comparing wattage without checking the output and load

    FiiO lists different power outputs for the K11’s 6.35 mm and 4.4 mm outputs, as well as for different loads. A single figure doesn’t describe every combination of output and headphones.

    First check the plug, then check the power rating for that specific output at a load that matches your headphones’ specifications.

  • Changing sound settings between comparisons without realising

    Gain, bass boost or digital filters can introduce extra differences into your listening comparison if their settings change.

    Make a note of the settings and keep them the same between sessions. Turn the volume down before changing the gain, as recommended in the iFi ZEN DAC 3 manual.

Key brands to consider

Pro-Ject Audio Systems

The Head Box S2 and the separate Head Box S2 Digital illustrate the difference between analogue and digital connections.

  • According to Pro-Ject, the Head Box S2 has an RCA input and 3.5 mm and 6.35 mm headphone sockets; the S2 Digital offers digital inputs and a 6.35 mm headphone output.
  • These models don’t have identical connections. Don’t assume that the power specifications for one model apply to the other.

FiiO

The K11 is a desktop DAC and headphone amplifier with several inputs and two headphone outputs.

  • FiiO specifies USB-C, optical and coaxial inputs, as well as 6.35 mm and 4.4 mm outputs.
  • Power and noise figures vary by output and test load, so they don’t support a blanket statement about the brand as a whole.

iFi audio

The ZEN DAC 3 is a USB DAC and headphone amplifier with selectable gain and additional sound features.

  • The manual lists USB-C, 6.35 mm and 4.4 mm headphone outputs, as well as PowerMatch and XBass+.
  • Selectable features add another variable when comparing recordings. The manual recommends turning the volume down before changing the gain.

Lake People

The G111 MKII is an analogue option for a source with a suitable signal output.

  • Lake People specifies RCA and XLR inputs, two 6.3 mm headphone outputs and internally adjustable PRE-GAIN.
  • The manufacturer’s descriptions of the sound aren’t independent confirmation of how the device will sound with every pair of headphones.

Fosi Audio

The K7 illustrates a DAC and headphone amplifier with additional input and connection features.

  • The European manufacturer’s website lists USB, optical and coaxial digital inputs, as well as Bluetooth and a microphone input.
  • These features alone don’t prove that it will help you compare recordings more effectively; check which ones you actually need.

Joybuy products

USB DACs with an integrated headphone amplifier for computer playback.

Nobsound Q4 USB audio DAC with headphone amplifier

Nobsound Q4 USB audio DAC with headphone amplifier

A USB input and integrated headphone amplifier are specified for USB playback from a computer.

The product description also lists optical and coaxial inputs, as well as a headphone impedance range of 16–300 Ω.

Treble and Depth controls are listed; keep their settings consistent when comparing recordings. Use the correct external DC power supply, as stated in the product warning.

View at Joybuy

Frequently asked questions

Can I connect an analogue headphone amplifier directly to my computer via USB?

Not if that particular device only has an analogue audio input. Pro-Ject lists an RCA input for the Head Box S2. For USB audio, you’ll need a suitable DAC in the signal chain, such as a model with a USB input like the separate Head Box S2 Digital.

What should I do when changing headphones or gain settings?

Start at a low volume and adjust the level again. The iFi ZEN DAC 3 manual warns against switching PowerMatch when the volume is already high; the WHO recommends limiting volume and listening time together.

Should USB, optical and coaxial inputs be treated equally for high-resolution files?

No. Check the input you’re actually using and the relevant file format. Pro-Ject lists different supported formats for USB and for optical and coaxial inputs on the Head Box S2 Digital.

How do I compare the output power with my headphones?

Check your headphone plug and compare the power rating and load impedance specified for the output you’ll use with your headphone specifications. FiiO lists different figures for each output and load on the K11, so a single power rating won’t apply to every combination.

Does a CE marking prove the sound quality of a headphone amplifier?

No. The European Commission describes CE marking as part of the conformity assessment for relevant EU requirements, not as a sound test. You’ll need to check which requirements apply to the specific product and whether the necessary evidence is available.