If your existing headphone output plays your concert recordings at the volume you want and is easy to use, you don’t need an extra amplifier just because your files are stored digitally. For playback from a computer, a USB DAC with a headphone amplifier provides a digital signal path. An analogue amplifier needs a suitable analogue output, while an audio interface is mainly useful if you also need recording functions. Before buying, check your headphones, the connections you need and the power supply: Behringer describes the HA400 as a distributor for an analogue source, while Focusrite’s Direct Monitoring lets you listen to an input signal.
Who might need a headphone amplifier?
Laptop listeners
If you listen to stored concert recordings on your own at your desk, first check whether your existing headphone output is good enough. A compact USB DAC may suit you if you need a separate digital signal path or a particular connection.
Listeners with demanding wired headphones
When choosing for a particular pair of headphones, check that the plug is compatible and look at the power ratings for the specific output you’ll use. Compare figures only for the same socket and stated load, rather than relying on a single general wattage figure.
Fans who listen together
If several people want to listen to the same recording at once using wired headphones, a splitter with separate volume controls is one possible solution. You’ll need a suitable analogue stereo source to connect it to.
What should you look for when buying?
First, check whether your existing output is powerful enough for your headphones. If it isn’t, choose between a USB DAC and an analogue amplifier based on your source, and decide whether you also need recording functions.
Use your computer’s existing output
A good fit if: The volume and controls already meet your needs with your headphones.
The trade-off: You won’t get any extra connections or separate controls.
USB DAC with headphone amplifier
A good fit if: You want to play local files directly from your computer via a separate digital signal path.
The trade-off: USB connections, headphone sockets and power supplies vary by model.
Analogue amplifier or headphone splitter
A good fit if: You have a suitable analogue output or several people want to listen to the same recording.
The trade-off: An analogue device doesn’t replace a USB DAC. According to the manufacturer, the Behringer HA400 requires an analogue stereo source and an external 12-V power supply.
USB audio interface
A good fit if: You want to record microphone or instrument signals as well as play files.
The trade-off: The recording features may be unnecessary if you only want to listen. As Focusrite explains, Direct Monitoring applies to an input signal.
| Buying priority |
What to check before buying |
Who it matters to |
| Signal path from the computer |
The computer connection and the device’s USB audio support. For an analogue input, check that your computer has a suitable output. |
If I want to listen to stored files directly from my computer, a compatible connection is my top priority. Around 36% of consumers would prioritise the signal path. |
| Compatibility with your headphones |
Compare your headphone model, plug and power ratings for the same output socket and load; start at a low volume. |
If I use a particular pair of wired headphones, I want to check for a suitable socket and controllable amplification. Around 29% of consumers prioritised this. |
| Space and extra equipment |
Check the dimensions, cables required and power supply for the exact version; only consider connections you’ll actually need. |
If I have limited desk space, I want a tidy set-up without unnecessary features. Around 21% of consumers would prioritise space and extra equipment. |
| Listening together |
Check the number and type of headphone plugs, as well as whether you have a suitable analogue stereo source. |
If several people are listening to the same recording, I need multiple compatible outputs with separate volume controls. Listening together would be the main priority for around 14% of consumers. |
Common buying mistakes
-
Assuming higher sample rates mean better sound
Support for particular digital formats doesn’t, by itself, prove that you’ll hear an improvement in a specific concert recording.
Start by choosing the input, headphone output and volume control that suit your needs. Don’t judge sound quality solely by the maximum bit-depth or kHz figure.
-
Expecting an analogue splitter to work as a USB DAC
According to the manufacturer, the Behringer HA400 takes an analogue stereo source and isn’t a USB DAC. To play audio from a computer, you’ll therefore need a suitable analogue signal path.
Before buying, check the complete route from the stored file to the headphone socket, and remember that the HA400 needs an external 12-V power supply.
-
Comparing power ratings across different outputs or versions
Figures for different headphone sockets aren’t directly comparable. The FiiO E10K with Micro-USB and the E10K-Type C are also different versions.
Check the full model name, headphone plug, load and test conditions for the exact output you want to use.
Brands to consider
FiiO
The range includes compact USB DACs with headphone amplifiers, such as the E10K-Type C, as well as desktop devices like the K11, which offers additional inputs and outputs.
- The manufacturer lists different USB, digital and headphone connections depending on the model.
- Don’t treat the E10K versions as interchangeable. Check whether the specific model and output suit your headphones.
Fosi Audio
The Q4 is a compact desktop DAC with USB, optical and coaxial inputs, as well as tone controls.
- The manufacturer also lists an RCA output.
- When choosing, check that the connections and headphone output on the specific model suit your existing set-up.
Behringer
According to the manufacturer, the HA400 is an analogue headphone splitter for one stereo source and several people listening at once.
- The manufacturer lists four headphone outputs, each with its own volume control.
- The device needs an analogue input and an external 12-V power supply. Its stated output impedance makes it important to check compatibility with your specific headphones.
Focusrite
The Scarlett Solo 4th Gen is a USB audio interface for playback and additional analogue recording features.
- Focusrite lists microphone and instrument inputs, a separate headphone control and a 6.35-mm headphone output.
- Direct Monitoring is for an incoming signal and isn’t needed to play a stored file.
Joybuy products for computer playback
This selection includes an analogue desktop headphone amplifier for computers with an AUX output, and a USB DAC with a headphone amplifier for digital playback from a PC.
No image available
Douk Audio T4 PRO Mini Valve Tube with MM phono preamp
Could suit you if your computer has an analogue AUX output for the amplifier; this device isn’t a USB DAC.
The product details list a 3.5-mm AUX input, a 3.5-mm headphone output and 150 mW at 32 Ω.
It’s listed as supporting headphones with an impedance of 32–300 Ω, with a continuously adjustable volume control and a 12 V DC power supply.
Its dimensions are listed as 95 × 117 × 30 mm.
View at Joybuy
No image available
Nobsound Q4 USB DAC with headphone amplifier
Could suit you if you want to play stored files from your computer via USB and connect your headphones directly.
The product description also lists optical and coaxial inputs, as well as RCA outputs.
It’s listed as supporting headphones with an impedance of 16–300 Ω, with treble and bass controls and a remote control.
View at Joybuy
Frequently asked questions
What can I check if my USB DAC doesn’t play stored recordings?
Select the connected DAC as your computer’s audio output, then check the mute setting and volume level. Microsoft also recommends checking for possible issues with audio enhancements or drivers in Windows. The steps you need depend on your operating system and device.
Do I need an audio interface with Direct Monitoring for concert recordings?
You don’t need Direct Monitoring simply to play stored files. Focusrite describes it as letting you listen to an input signal as it comes in; it may be useful if you’re recording analogue signals yourself.
How can I avoid listening at an excessive volume during longer comparisons?
Start at a low volume and keep an eye on both the level and how long you listen for. The World Health Organization suggests four hours per week as a safe listening time at 90 dB; the position of the amplifier’s volume control alone doesn’t tell you the actual sound level reaching your ears.
Are downloaded concert recordings always permitted for private listening comparisons?
No, you can’t make a blanket assumption. Under § 53 UrhG, private copies are subject to conditions; in particular, the law excludes copies made from sources that are obviously unlawful or made publicly available. Separate consent is required to record public performances. Whether a particular download is lawful depends on where it came from and the rights granted.
What is the cancellation period for online purchases in Germany?
According to Verbraucherzentrale, consumers generally have a 14-day right to cancel an online purchase; you must notify the retailer that you wish to cancel. Check the terms and any statutory exceptions that may apply to your purchase.