Listeners with two monitors
If one computer plays your music and drives both monitors, the key is finding the right audio connection for your wired headphones. The number of monitors doesn’t determine the audio connection.
If one computer runs both monitors, choose your headphone amplifier based on the audio output and your headphones, not the number of monitors. If you have two computers, you’ll also need a suitable way to switch between audio sources. Make sure the connections, amplification, playback settings and power supply are right for your particular setup.
If one computer plays your music and drives both monitors, the key is finding the right audio connection for your wired headphones. The number of monitors doesn’t determine the audio connection.
If you switch between a work and personal computer, think about how you’ll switch the audio connection as well as how you’ll manage your monitors.
If you want to connect headphones you already own, check that the plug and socket match. Compare power ratings under the right conditions rather than relying on a single advertised maximum.
First, work out how many computers will actually supply audio: two monitors may be connected to one computer or two. This determines whether a single audio input is enough or whether you’ll also need to switch between sources.
| Buying consideration | What to check before buying | Who it matters most to |
|---|---|---|
| Audio source and switching | Count your computers and check their audio outputs. If you’re using a switch, make sure the USB audio connection is compatible with your specific combination of devices. | If I switch between two computers, I want to know how the audio switches alongside my monitor setup. Around 36% of consumers put the audio source and switching first. |
| Headphone connection and output level | Check that the cable plug matches the output socket. Compare power ratings only under equivalent load conditions and for the same type of output. | For my existing headphones, a compatible connection and clear information about amplification matter more than a single maximum figure. Around 29% of consumers prioritise headphone compatibility. |
| Lossless signal chain | Check the source and playback settings, as well as the sampling rate supported by the input you’re using. | If lossless playback matters to me, I want to make sure the source, settings and signal path all work together. Around 21% of consumers put the lossless signal chain first. |
| Space and power supply | Check the available desk space and whether the device needs USB or mains power. Consider whether you need a line output with volume control. | On a crowded desk, I want to know how the device is powered and whether it will work with my existing equipment. Around 14% of consumers prioritise space and power requirements. |
A DAC input won’t automatically let two computers use the same audio connection.
Map out your computers, monitors and audio connections separately. Then check whether you need to select the input on the device or use a compatible switch.
Depending on your setup, you may also need a suitable switch or a different way to connect the audio.
Power ratings apply to specific loads and outputs. Supported sampling rates may vary between inputs.
Compare power figures under equivalent conditions and check which formats are actually supported by your source, settings and chosen input.
According to the manufacturer’s manual, the iFi ZEN DAC 3 bypasses volume control on the rear output when set to Fixed.
Check the Fixed and Variable settings before connecting active speakers, and start at a low volume.
The TOPPING manual requires USB-DC-5-V power even when using an optical audio source. If the source doesn’t provide enough power, you may need an additional USB Y-cable, which isn’t included according to the manual.
Check the power source and what’s included for the exact connection method you plan to use.
Depending on your source, you may need an additional suitable power supply or cable.
The K11 is a desktop DAC and amplifier for wired headphones, with USB, optical and coaxial inputs.
The ZEN DAC 3 is designed for USB audio setups where you may also want to connect active speakers or another amplifier.
According to the manufacturer’s manual, the K5 Pro offers USB, optical and coaxial connections, as well as a microphone input.
The DX1 II is a USB-powered DAC and amplifier with an alternative optical input and 3.5 mm and 4.4 mm headphone connections.
The DacMagic 200M is worth considering if you want one device with several digital sources and a headphone connection.
The Joybuy products below include a DAC and amplifier with several digital inputs, and an analogue headphone amplifier for an existing, compatible analogue source.
No image available
For one PC and compatible digital audio sources; the product description lists USB, optical and coaxial inputs.
The description lists 24 Bit/192 kHz and a headphone amplifier for headphones rated at 16–300 Ω. Check that the plug and connection method are right for your headphones and source.
According to the description, the U-Disk input takes priority over Bluetooth; remove the USB stick to use Bluetooth.
No image available
For an analogue signal path, if you already have a suitable analogue output or a separate DAC.
The product description lists MM phono and 3.5 mm AUX inputs, a 3.5 mm headphone output and support for 32–300 Ω.
For a digital PC source, you’ll need a suitable analogue output or a separate DAC. The stated output is 150 mW at 32 Ω; the warning says to use only the compatible DC power supply.
No, not just because you have two monitors. What matters is whether audio comes from one computer or two separate computers. If it’s the latter, you’ll need to plan specifically for switching between audio connections.
In Apple Music, go to Settings and Playback, switch on “Lossless Audio” and choose the quality you want for streaming or downloads. Apple lists up to 24 Bit/48 kHz for Lossless and up to 24 Bit/192 kHz for Hi-Res Lossless; also check the audio output of your playback chain.
Start at a low volume and only turn it up once everything is connected. The iFi manual warns against changing the gain when the volume is already high; the World Health Organization also highlights the risks of listening volume and duration.
It depends on the model and input. For the FiiO K11, the manufacturer specifies DC 12 V/2 A. The TOPPING DX1 II also needs USB-DC-5-V power for optical audio; for source devices that don’t provide enough power, the manual specifies a USB Y-cable, which isn’t included.
According to Your Europe, the European Union’s information service, you generally have 14 days from delivery to withdraw from an online distance sale of goods; exceptions and return costs should be taken into account. If goods are faulty, you generally have a minimum legal guarantee of two years from the seller. A voluntary manufacturer’s guarantee doesn’t replace this.