Which set-up is right for you?

Lossless listeners at their computer

If you want to listen to digital music at your desk through wired headphones, look for a suitable signal path and an easy-to-reach volume control.

Owners of demanding headphones

Check that the socket and amplification suit your particular headphones. Power ratings only apply under the stated conditions.

Music listeners who take calls

If you also make calls at the same desk, check whether you need a separate microphone or headset connection.

What should you look for when buying?

First, work out the signal path from your source. Then check the headphone connection, volume control and whether you need extra connections for calls.

Consideration What to check Who this matters to
Digital signal path Match the inputs to the output on your computer or existing DAC. Check with your music service that lossless playback and, if relevant, downloads are enabled. If I want to listen to digital lossless music from my computer, I want to know whether the DAC and amplifier work together in one device. Around 31% of consumers put a suitable digital signal path first.
Headphone compatibility Check that the plug and socket match, and factor in any adapters you may need. Compare power figures only at the same load and with the same type of output; start at a low volume. If you want to keep using your current headphones, the right connection and controllable amplification are particularly important. Around 31% of consumers rank headphone compatibility as their main buying consideration.
Ease of use at your desk Allow for space, power and the cables you need. If you use active speakers, check in advance which device controls their volume. If I want to switch easily between headphones and other audio equipment at my desk, accessible controls and suitable outputs are important. Around 23% of consumers prioritise ease of use at their workstation.
Music and calls Check whether you use a separate microphone or a CTIA headset, and make sure its plug matches the connections on the specific model. If you want to make wired calls as well as listen to music, you may need a microphone or headset connection. Around 15% of consumers put this combined use first.

Common buying mistakes

  • Choosing solely on the basis of the highest mW or kHz figure

    Power ratings only apply to the stated output type and load. Whether you need an external DAC also depends on your source and the playback you want.

    Compare power figures only under like-for-like conditions, and first check the signal path, headphone connection and formats you need.

  • Planning to connect an analogue amplifier straight to USB music

    A dedicated analogue amplifier such as the Topping L30 II accepts an analogue signal; it does not convert USB audio.

    Check the path from your music source to your headphones, including the inputs and outputs, before choosing a type of device.

    For a digital source, you may also need a DAC with a suitable analogue output.

  • Confusing a fixed line output with a variable output

    On the iFi ZEN DAC 3, the rear output in Fixed mode bypasses the device’s volume control.

    If you’re connecting active speakers, check which control adjusts their volume and start at a low level.

  • Assuming there will be a microphone input for work calls

    A headphone output doesn’t mean you can also connect a microphone. The Creative Sound Blaster G8 is documented as having a microphone input and a CTIA headset socket.

    Before buying, check that the connections on the specific model match your headset or microphone plug.

Key brands to consider

FiiO

The K11 combines a DAC and headphone amplifier for a dedicated desk set-up, with USB, optical and coaxial inputs.

  • FiiO lists a 6.35 mm and a balanced 4.4 mm headphone output, as well as three gain levels.
  • The device uses an external power supply. Its stated maximum output only applies to the specified output type and load.

iFi audio

The ZEN DAC 3 combines a USB DAC and headphone amplifier; the ZEN CAN 3 is an analogue amplifier for a different signal path.

  • The ZEN DAC 3 manual lists 6.35 mm and 4.4 mm headphone outputs, switchable gain and rear outputs with a Fixed/Variable switch.
  • In Fixed mode, the ZEN DAC 3’s volume knob does not control the rear output.

Topping

The L30 II is a dedicated analogue headphone amplifier for when you already have a suitable analogue source.

  • The manufacturer’s manual lists RCA inputs and outputs, a 6.35 mm headphone socket and gain levels.
  • The L30 II does not have a USB DAC built in; a suitable DAC is needed in the signal path for a digital USB signal.

Creative

The Sound Blaster G8 combines a DAC and headphone amplifier with connections for music, calls and multiple audio sources.

  • Creative lists two USB-C ports, a microphone input and a CTIA headset socket.
  • Microphone and headset features aren’t essential for listening to music alone; check whether you’ll actually use them at your desk.

Joybuy products

This selection includes a USB DAC with an integrated headphone amplifier and an analogue desktop headphone amplifier.

Nobsound Q4 USB DAC and headphone amplifier

Nobsound Q4 USB DAC and headphone amplifier

For a digital desk set-up if you want to use USB, optical or coaxial inputs, along with a remote control and tone controls.

The product name lists Bluetooth and 24-bit/192 kHz. USB, optical and coaxial inputs are specified.

Joybuy
Douk Audio T4 PRO Mini Valve desktop headphone amplifier

Douk Audio T4 PRO Mini Valve

For a source with an analogue 3.5 mm output if you want to use a headphone amplifier with a volume control at your desk.

Listed inputs: MM phono and 3.5 mm AUX. A 3.5 mm headphone output and an impedance range of 32–300 Ω are specified.

The listed input configuration does not include a USB input, so a suitable DAC is required in the signal path for digital USB audio.

Joybuy

Frequently asked questions

Do I always need an external DAC for lossless music?

No, not in every case. According to Apple Support, whether you need an external DAC depends on the source and the sample rate you want; for certain iPhone and iPad scenarios, Apple says one is needed for tracks above 48 kHz. Check the requirements of your specific source rather than focusing only on the amplifier’s maximum sample rate.

What should I set up first when connecting everything?

First, check the selected input, the right headphone socket and the volume. The ZEN DAC 3 manufacturer’s manual recommends lowering the volume before changing the PowerMatch gain; in Fixed mode, the rear output bypasses the device’s volume control.

How can I protect my hearing during long working days?

Keep the volume low. The World Health Organization gives four hours of listening per week at 90 dB as a guideline; this is not a guaranteed volume setting for any particular amplifier.

What are the rules in Germany for faults and old electrical equipment?

When you buy from a business seller, your statutory rights apply. EU consumer information states that you have at least two years from receiving the goods, and distinguishes these rights from a voluntary manufacturer’s guarantee. According to the German Environment Agency, old electrical equipment must not go in household waste and can be taken to municipal collection points, among other places.