Who might need a headphone amp at a standing desk?

Listeners who stand at their desk

If you listen while standing, controls should be within easy reach, and cables shouldn’t become taut or trapped when you adjust the height of your desk. Ergotron recommends allowing enough slack in cables when using a height-adjustable desk.

Listeners with favourite wired headphones

Check that the plug and the output you’ll actually use are compatible with your headphones. FiiO and iFi audio document different outputs and settings for their devices, so the specific socket you plan to use is what matters.

Listeners with several audio devices

If you also want to connect active speakers, other digital sources or an analogue microphone to your PC, check that the required inputs and outputs are available. Manufacturers list these connections for specific models, not as a general feature of an entire product category.

What should you look for?

First, check whether your PC’s existing output is suitable for your headphones and easy to use while standing. If it isn’t, check the connections and power supply you need, and plan the cable route for the full range of desk heights you’ll use.

Consideration What to check before buying Who is this important to?
Ease of use and cable routing Check where the controls will sit at your workstation and how the cables will run at the desk heights you use; allow enough slack. When I listen standing up, I want to be able to reach the controls without cables becoming taut as I adjust the desk. Around 28% of consumers prioritise ease of use and cable routing.
Compatibility with headphones and output Check the plug, headphone specifications and output details for the socket you can use; start with a low volume if you change the gain. The plug and output specifications need to match the connection I’ll actually use with my wired headphones. Around 22% of consumers prioritise this compatibility.
PC connection, power and desk space Check the USB connection, power source and space required for the specific device. At my desktop, I want a straightforward set-up with few connections and minimal extra equipment taking up space. Around 22% of consumers focus on a simple PC set-up, including power and desk space.
Additional audio devices Check that the inputs and outputs you need are available, and that the volume can be controlled for each connected device. If I want to use active speakers, other digital sources or a microphone as well as headphones, I need the right connections. Around 17% of consumers prioritise support for additional audio devices.
Existing analogue source Before buying an analogue amp, check that you have an analogue output available and the cables you need to connect it. If I already have a DAC or a suitable analogue output, I want to keep using that source. Around 11% of consumers prioritise using an existing analogue source.

Common misconceptions when buying

  • The highest milliwatt figure applies regardless of socket and load

    Power specifications can vary depending on the output, connected load and test conditions. FiiO lists separate figures for the K11’s headphone outputs.

    Only compare figures for the output you can actually use and a suitable load. Start with the volume turned down when changing the gain.

  • A purely analogue amp automatically includes a USB DAC

    The iFi ZEN CAN 3 is a purely analogue solution and does not function as a USB DAC.

    Before buying, check whether your PC or an existing DAC provides a suitable analogue output.

  • Line output and headphone volume are always controlled together

    According to the manufacturer’s manual, the rear output on the iFi ZEN DAC 3 bypasses the device’s volume control when set to “Fixed”.

    Before switching on active speakers, check the switch setting and the speakers’ volume control.

  • For a standing desk, checking the connections is all that matters

    With a height-adjustable desk, a cable can become taut or trapped if there isn’t enough slack along its route. Ergotron’s assembly instructions highlight the need to allow enough slack.

    Test the cable route at both desk heights you use before securing the cables.

Relevant brands to consider

FiiO

The FiiO K11 combines a USB DAC and headphone amp with optical and coaxial inputs. This may be useful if you want to connect digital sources other than your PC.

  • FiiO lists separate headphone outputs and load-dependent power specifications for the K11.
  • According to FiiO, the K11 requires a DC 12 V/2 A power supply. The manufacturer’s specifications are not an independent comparison of sound quality.

iFi audio

The ZEN DAC 3 combines a USB DAC and headphone amp. The ZEN CAN 3, by contrast, is a purely analogue amp that requires a suitable analogue source.

  • The rear output on the ZEN DAC 3 can be switched between “Fixed” and “Variable”.
  • When set to “Fixed”, the rear output bypasses the volume control, according to iFi’s manual. Manufacturer claims about performance are not independent listening tests.

Creative

The Creative Sound Blaster X4 is a USB audio solution for PC set-ups that use an analogue microphone or headset as well as headphones.

  • Creative lists USB-C for audio and power, along with microphone and headset inputs.
  • Surround sound and communication features aren’t essential selection criteria if you only listen in stereo.

RME

The ADI-2 DAC FS is an option for PC users who also need DSP settings and separate outputs for headphones and sensitive in-ear monitors.

  • RME lists USB, digital signal processing, a headphone output and an IEM output.
  • Extra features are only worth considering if they suit your needs; they don’t guarantee a universal sound quality benefit for every pair of headphones.

Focusrite

The Scarlett Solo 4th Gen is an audio interface for a PC set-up where you want to use a microphone for recording as well as listen through headphones.

  • Focusrite lists a microphone input, a USB connection to the computer and a separate headphone level control.
  • Recording features alone don’t demonstrate an advantage for listening to music.

Joybuy products for listening to PC audio at a standing desk

USB DACs with a built-in headphone amp for PC playback and easy control at your workstation.

Nobsound Q4 USB audio gaming DAC converter with headphone amp

Nobsound Q4 USB Audio Gaming DAC Converter

The PC USB input and included remote control may suit you if you want to listen to audio from your desktop PC and adjust settings without having to stand right next to the device.

The product description lists a headphone amp for headphones rated at 16–300 Ω, RCA outputs, Bluetooth and an optical input.

The product name specifies 24-bit and 192 kHz, as well as treble and bass controls. The description mentions an external DC power supply; use the correct one.

View at Joybuy

Frequently asked questions

Do I need a separate DAC as well as a USB DAC with a headphone amp?

No, if your chosen device combines a USB DAC and headphone amp, as the FiiO K11 and iFi ZEN DAC 3 do. A purely analogue amp, such as the iFi ZEN CAN 3, requires a suitable analogue source.

How should I route cables on a height-adjustable desk?

Allow enough slack to prevent cables becoming taut or trapped across the full range of desk heights you use. Ergotron recommends leaving enough cable slack in its assembly instructions for a height-adjustable desk; this doesn’t establish a minimum measurement that applies to every desk.

Why might the volume control behave differently when I connect active speakers?

According to the manufacturer’s manual, the rear output on the iFi ZEN DAC 3 bypasses the device’s volume control when set to “Fixed”. Check the switch setting and the speakers’ volume control before switching them on; this behaviour doesn’t automatically apply to other models.

Is it enough to choose the amp with the highest power rating?

No, because power specifications depend on factors including the output used and the connected load. FiiO lists different figures for the K11 depending on the headphone output, so only compare specifications that suit your headphones and the connection you can actually use.