Which type of headphones is right for you?

Moving between rooms while cleaning

If you walk around while doing light housework, a Bluetooth model with an optional cable can make it easier to switch between moving about and listening closely. Audio-Technica gives the ATH-M50xBT2 as an example of headphones offering both options.

Picking out the bassline in one place

If you want to listen to tricky passages repeatedly, a suitable connection, comfortable fit and quiet listening environment all matter. beyerdynamic and Sony offer closed-back wired models such as the DT 770 PRO X and MDR-M1.

Listening closely around household noise

If you want to follow instrumental details despite background noise, compare the fit and passive isolation of closed-back models. Sennheiser describes the HD 25 as a closed-back on-ear model with passive isolation, but this shouldn’t be taken to mean it offers a specific level of noise reduction.

What should you look for when buying?

First, work out whether you’ll be moving around while doing the housework or mainly listening in one place. Then consider how the connection, fit and background noise will work with your routine.

Closed-back Bluetooth over-ear headphones with a cable option

A good fit if: you move between rooms while cleaning and want to switch to a cable for closer listening.

The trade-off: Bluetooth needs a charged battery. Audio-Technica says playback differs between wired and Bluetooth modes on the ATH-M50xBT2.

Closed-back wired over-ear headphones

A good fit if: you check tricky passages repeatedly in one place and don’t want to rely on a battery.

The trade-off: the cable limits how far you can move, so make sure its connector and length suit your device and workspace.

Closed-back compact on-ear headphones

A good fit if: a compact design and the option to listen with one ear are more important to you than an over-ear fit.

The trade-off: Sennheiser says the HD 25 has a high clamping force, so try them on for as long as you’d usually listen.

Open-back studio headphones

A good fit if: you can do your transcription in a quiet place and prefer an open-back design.

The trade-off: an open-back design won’t block out background noise as effectively as closed-back headphones. Sony’s MDR-MV1 is a wired example.

Consideration What to check before buying Who is this important to?
Freedom of movement Bluetooth and optional wired use; if you’re using a cable, check its length and route. If I move between rooms while cleaning, I don’t want to get caught up in an audio cable. Around 25% of consumers put freedom of movement first.
Bassline and individual notes Check the sound tuning of the specific model with a familiar passage and your own playback device. When I’m checking tricky bars, I want to be able to assess the notes repeatedly without assuming that boosted bass means greater accuracy. Around 25% of consumers prioritise judging the notes.
Household noise Compare the fit and passive isolation in your own environment; don’t compensate by turning up the volume. If appliances are running at home, I want to take background noise into account without turning up the volume. Around 20% of consumers put dealing with household noise first.
Comfort If possible, try on-ear and over-ear headphones for your usual listening time to check for pressure and fit. For longer listening sessions, I want headphones I can wear comfortably; a product description can’t tell me how well they’ll fit me personally. Around 15% of consumers prioritise comfort.
Connection and power Check your playback device’s socket or Bluetooth capability, what’s included and the cable length you need. If I switch between wireless listening and checking tracks in one place, the connection needs to suit my playback device. Around 15% of consumers prioritise connection and power.

Which mistakes should you avoid?

  • Assuming similarly named models have the same cable compatibility

    Audio-Technica points out that longer ATH-M50x cables aren’t directly compatible with the ATH-M50xBT2. According to the manufacturer, playback also differs between wired and Bluetooth modes on the BT2.

    Before buying, check the full model name, what’s included and whether the cable you plan to use is compatible.

    You may need an extension cable that’s compatible with the specific model to get more reach.

  • Turning up the volume to drown out household noise

    High sound levels can damage your hearing. Closed-back headphones won’t automatically eliminate distracting noise, and the World Health Organization warns against listening at unsafe volumes.

    Listen at a moderate volume and save tricky listening decisions for a quieter time.

  • Assuming open-back and closed-back models suit the same routine

    Sony describes the MDR-MV1 as open-back and the MDR-M1 as closed-back. An open-back design doesn’t block out noise during noisy housework in the same way as closed-back headphones.

    Consider the design and your actual listening environment rather than choosing based only on the word ‘studio’.

Key brands to consider

Audio-Technica

The ATH-M50xBT2 is a Bluetooth over-ear model with an optional cable; the ATH-M50x is a separate wired model.

  • Audio-Technica lists multipoint connectivity, a low-latency mode and more than 50 hours of battery life on a full charge for the ATH-M50xBT2.
  • The manufacturer says playback differs between wired and Bluetooth modes; longer ATH-M50x cables aren’t directly compatible.

beyerdynamic

The DT 770 PRO X is a closed-back wired over-ear model for checking tracks in one place.

  • beyerdynamic lists a detachable mini-XLR cable, a nominal impedance of 48 ohms and velour ear pads.
  • The manufacturer’s description of the bass response doesn’t prove that it makes basslines easier to transcribe accurately.

Sony

The MDR-M1 is a closed-back wired monitor; the MDR-MV1 is an open-back alternative for quiet listening environments.

  • Sony gives the MDR-M1’s weight as around 216 g without a cable, and says it comes with cables of around 1.2 m and 2.5 m.
  • The MDR-MV1’s open-back design doesn’t enclose the ear and won’t block out noise in the same way as closed-back headphones.

Sennheiser

The HD 25 is a closed-back wired on-ear model for buyers looking for a compact design and the option to listen with one ear.

  • Sennheiser lists a swivelling ear cup, a detachable single-sided cable and passive isolation.
  • The manufacturer says it has a high clamping force, so check how comfortable it feels over your usual listening time.

Joybuy products for checking tracks

The options below include a Bluetooth over-ear model with a cable option, as well as wired headphones for monitoring. For the wired option, check that the connection is compatible with your playback device.

AKG N9 Hybrid over-ear headphones, Black

AKG N9 Hybrid over-ear headphones, Black

Worth considering if you want to use Bluetooth while moving around and switch to a wired connection to check tracks in one place.

Bluetooth 5.3 with multipoint; active noise cancellation.

3.5 mm cable option; foldable design.

The product name states a battery life of 55 hours.

View at Joybuy
VoxorAI KM08 White, wired headphones

VoxorAI KM08 White, wired headphones

Could be worth considering for wired real-time monitoring if the Type-C connection suits your playback device.

The product name mentions a sound card for real-time monitoring and a Type-C connection.

The cable is listed as 1.2 m long; check that it’s long enough for your listening position.

View at Joybuy

Frequently asked questions

Can I turn up the volume when household appliances are running?

No. Turning up the volume isn’t a good substitute for listening in a quiet environment. The World Health Organization warns that high sound levels can damage your hearing. Pause noisy tasks when you need to check tricky passages, and listen at a moderate volume.

Will a longer ATH-M50x cable work directly with the ATH-M50xBT2?

No. Audio-Technica says longer ATH-M50x cables aren’t directly compatible with the ATH-M50xBT2. If needed, check for an extension cable that’s suitable for the cable supplied with your headphones. The manufacturer also says playback differs between wired and Bluetooth modes.

What should I check before listening for the first time?

Connect the exact model to your playback device using the intended plug or Bluetooth, then try a familiar passage at a moderate volume. If you’re moving around, keep cables out of your work area. Audio-Technica’s manual advises keeping the ATH-M50xBT2 dry and not using it where being unaware of your surroundings could pose a serious risk.

What should I look for when buying Bluetooth headphones in Germany?

The Federal Network Agency lists CE marking, product traceability and correct manufacturer details among the points it checks when monitoring the market. Check the information for the specific product; CE marking isn’t a judgement of sound quality.

Is a manufacturer’s warranty the same as statutory consumer rights?

No. According to information from the European Union, when you buy goods from a business seller in the EU, you generally have a legal guarantee of at least two years from the date you receive the goods. Any additional commercial guarantee offered is separate, so check its terms.