Which headset is right for you?

Recording with a fan running

If the fan needs to stay on while you record your explainer, look for clear-sounding speech and a microphone that’s easy to position. Shure recommends trying different microphone positions rather than assuming the noise can be removed completely.

Using an existing computer or audio interface

If you want to use the inputs you already have, check that USB, TRRS or separate XLR and headphone connections are compatible with your device and the exact headset version.

Recording multiple takes

For longer or repeated passages, it’s important to have a microphone position you can set reliably and to be able to hear your recording clearly. Closed-back ear cups affect what you hear; they don’t automatically reduce fan noise in the recording.

What should you look for when buying?

USB headset connected to a computer

A good fit if: you want to record directly on your computer and have a compatible USB port.

The trade-off: A manufacturer’s claims about noise cancellation during calls don’t prove that the headset will reduce fan noise in a voice recording.

Broadcast headset with separate connections

A good fit if: your device has suitable microphone and headphone inputs and you want to connect the two signal paths separately.

The trade-off: According to the manufacturer, the standard Audio-Technica BPHS1 has an XLR connection for the microphone and a 6.3 mm jack for the headphones.

Headset with a combined jack connection

A good fit if: your device has a combined headset input that’s compatible with the microphone.

The trade-off: RØDE states that the supplied TRRS cable is required for the NTH-100M’s microphone to work.

Modular broadcast headset

A good fit if: you can choose the cabling and microphone power supply to suit your recording device.

The trade-off: According to the manufacturer, the beyerdynamic DT 297 PV MK II is supplied without a connection cable, so check the version and the cable you need before buying.

What matters What to look for when buying Who is it important for?
Speech clarity Microphone boom and positioning; listen to an unprocessed test recording with the fan running. If the fan stays on while I’m speaking, I want to be able to judge how clearly my voice comes through in a test. Around 40% of consumers prioritise speech clarity with a fan running.
Connection compatibility Check the plug and microphone input for the exact version; if the signals are separate, check the headphone output too. If I want to use my existing recording device, both the microphone and headphones need to work with it. Around 30% of consumers prioritise connection compatibility.
Monitoring and checking takes Check that recording and playback work at the same time and that you can listen back to an unprocessed test recording. If I’m recording several takes, I want to check the fan noise and my voice directly in the recording. Around 20% of consumers prioritise listening back to and comparing their takes.
Comfort over multiple takes Check the fit, padding and adjustable microphone boom; check what’s included with the specific version. If I’m recording longer passages several times, I want the headset to feel comfortable and the microphone to return to the right position. Around 10% of consumers first consider comfort during repeated recordings.

What should you watch out for when buying and connecting a headset?

  • Don’t confuse noise isolation when listening with a clean microphone signal

    Closed-back ear cups can affect what you hear, but they don’t show how much fan noise will remain in the recording.

    Assess headphone isolation and the unprocessed microphone recording separately.

  • Don’t assume a broadcast headset connects directly via USB

    The standard BPHS1 has separate XLR and 6.3 mm connections. A USB headset uses a different connection method.

    Before buying, check both signal paths from the headset to your recording device and find out whether you need compatible inputs and outputs or additional connection equipment.

    Depending on the connections you already have, you may need additional recording or connection equipment.

  • Don’t overlook the connection cable for the DT 297 PV MK II

    beyerdynamic states that the DT 297 PV MK II is supplied without a connection cable.

    First decide on the exact version and check the inputs on your recording device, then choose a suitable cable.

Relevant brands at a glance

Audio-Technica

The BPHS1 is a closed-back broadcast headset for speech, with separate microphone and headphone connections.

  • Audio-Technica specifies a dynamic cardioid microphone on a swivelling boom, along with replaceable ear pads and cables.
  • On the standard model, the microphone cable ends in XLR and the headphone connection is a 6.3 mm jack; the separately named BPHS1-XF4 version has a different connection. These details don’t measure how well it reduces fan noise in your room.

Logitech

The Zone Wired and H390 are different USB headsets designed for computer-based voice communication.

  • Logitech describes the Zone Wired as having dual-microphone noise cancellation for office environments, and the H390 as having a USB-A connection and a positionable microphone.
  • The manufacturer’s claims about calls and office environments aren’t comparative recording tests with a fan running.

RØDE

The NTH-100M combines over-ear headphones with a detachable microphone for media and voice applications.

  • According to RØDE’s guide, the supplied TRRS cable is required for the microphone to work.
  • Check that your device has a compatible combined microphone input; this doesn’t mean the headset has been tested against your fan noise.

beyerdynamic

The DT 297 PV MK II is a closed-back broadcast headset with a choice of cabling options.

  • beyerdynamic specifies a cardioid condenser microphone and versions with headphone impedance of 80 or 250 ohms.
  • According to the manufacturer, no version comes with a connection cable. Check the cabling, exact version and microphone power requirements before buying.

Sennheiser

The HMD 300 is a broadcast option with closed-back headphones and a dynamic supercardioid microphone.

  • Sennheiser describes passive noise isolation when listening, and a microphone that can be worn on either the left or right.
  • The product details don’t prove that it will capture less fan noise or that every HMD 300 version will connect to a particular recording device.

Joybuy headsets for voice recording

The following Joybuy models are headsets with microphones for recording speech on a computer. Check the connection on the model you’re considering and listen to a test recording with the fan running.

JBL Quantum 400 wired gaming headset

JBL Quantum 400 wired gaming headset

The flip-up directional microphone is described as suitable for voice recording; try positioning it with your recording device.

Connections: USB-C and 3.5 mm jack.

Memory foam ear cushions.

View at Joybuy
Logitech 960 stereo headset with USB connection

Logitech 960 stereo headset

The adjustable microphone is described as suitable for recording speech on a computer; check the sound in an unprocessed test recording.

Connection: USB. Cable length: 2.4 m.

On-ear headset with soft ear cushions.

View at Joybuy
ONIKUMA GT889 over-ear headset with detachable microphone

ONIKUMA GT889 headset

The flexible, detachable microphone can be repositioned; assess the recording with your fan running.

According to the product details, it connects via 2.4 GHz wireless, Bluetooth or cable.

Over-ear design.

View at Joybuy
Logitech G PRO X gaming headset with detachable microphone

Logitech G PRO X gaming headset

The detachable, unidirectional condenser microphone can be positioned for voice recording; check the results in your own environment.

A USB sound card is specified for PC features.

Memory foam ear cushions; PC and mobile cables are listed.

View at Joybuy
Logitech H570e mono headset with USB-A microphone boom

Logitech H570e mono headset

According to the product details, the adjustable microphone boom can be positioned close to your mouth; listen to a test recording with the fan running.

Connection: USB-A. Mono headset.

Replaceable ear cushions are specified.

View at Joybuy

Frequently asked questions

What should I check before my first recording with the fan running?

Record a short passage with the fan running, then listen back to the unprocessed recording. Shure recommends trying different microphone positions. If needed, adjust the position first, then assess your voice and any remaining noise together.

Is a 3.5 mm headphone socket enough for the RØDE NTH-100M?

A headphone socket alone doesn’t confirm that the microphone will record. RØDE states that the supplied TRRS cable is required for the microphone to work; also check that your device has a compatible microphone input.

Do I need to plan for anything else with the beyerdynamic DT 297 PV MK II?

Yes. According to beyerdynamic, no version of the DT 297 comes with a connection cable. Before choosing a cable, check the exact headset version and the connections on your recording device.

Does a USB headset’s noise cancellation prove that it removes fan noise from a recording?

No. Logitech describes the Zone Wired’s noise cancellation as designed for office environments; this isn’t a comparative recording test with a fan running. Instead, assess an unprocessed test recording made with your own setup.

What does the Bundesnetzagentur check for electronic products?

For market surveillance within its remit, the Bundesnetzagentur lists checks including correct CE marking, manufacturer information, required German-language instructions and the declaration of conformity. This information doesn’t confirm that every model or individual offer mentioned here has already been checked.