Who might need a DAC?

Listeners with no spare socket

If you play files on a computer or smartphone and don’t want to use another plug socket, check whether the specific DAC is USB-powered or has a battery. A USB audio input alone doesn’t mean the device is powered over USB. For example, FiiO specifies an external 12 V power supply for the K11, while the iFi ZEN DAC 3 manual describes USB power.

Listeners with their own hi-res collection

If you want to listen to your existing PCM or DSD files through wired headphones, your source device, connection and DAC all need to support the formats you use. FiiO specifies PCM up to 32 bit/384 kHz and DSD256 for the KA13; check these details against your own playback setup.

Listeners with several audio devices

If you also want to connect active speakers or another digital source, check that the inputs and outputs are suitable and that the volume can be controlled as needed. The iFi ZEN DAC 3 manual describes analogue outputs and a fixed output mode; FiiO lists optical and coaxial inputs for the K11, which also requires an external power supply.

What should you look for?

First decide how the DAC will be powered. Then check that its file-format support, headphone connection and any additional devices you need are compatible with your setup.

USB-powered dongle

A good fit if: you mostly listen through wired headphones connected to a USB source device and don’t want to use an extra plug socket.

The trade-off: The dongle draws power from the source device. FiiO says the KA17’s maximum specified output depends on having sufficient USB power or an additional power source.

USB-powered desktop DAC

A good fit if: you want to use a desktop DAC with headphone and analogue outputs at your computer without necessarily connecting a separate power supply. The iFi ZEN DAC 3 manual describes power via the supplied USB cable.

The trade-off: The unit takes up desk space and needs a suitable USB port. According to the manual, the “Fixed” setting bypasses the volume control for the rear output.

Battery-powered DAC headphone amplifier

A good fit if: you want to listen without using an extra plug socket and don’t want to rely solely on your source device’s USB power. iFi specifies a built-in battery and up to 12 hours of battery life for the hip-dac 3.

The trade-off: The battery needs to be charged. The battery life quoted by iFi isn’t guaranteed for every setup.

Desktop unit with an external power supply

A good fit if: you want to connect optical or coaxial digital sources and have a socket available for the power supply. FiiO lists these inputs for the K11.

The trade-off: FiiO says the K11 needs an external 12 V power supply. In this case, a USB audio input doesn’t mean the unit is powered over USB.

What matters What to check before buying Who is it important to?
Power supply Check the manual to see whether the DAC is USB-powered, has a battery or needs an external power supply. The KA17’s maximum specified output is subject to certain conditions. If I listen on a computer or smartphone and don’t want to use another plug socket, how the DAC is powered is my main concern. Around 36% of consumers say power supply is their top priority.
File formats Check the PCM or DSD formats of your files, your playback software, the source device’s USB output and the formats supported by the DAC’s input. If I want my own hi-res collection to play without format issues, I check the entire playback chain rather than just one maximum specification. Around 29% of consumers prioritise making sure their files play as expected.
Headphone connection and volume control Compare your plug and cable with the available sockets. If there are several outputs, check how the volume is controlled and any conditions that apply to each output. If I want to keep using my existing headphones, the plug needs to fit and the volume needs to be easy to control. Around 21% of consumers place the greatest importance on this connection and amplifier compatibility.
Additional connections List the digital sources and analogue outputs you need for your existing devices. If you have active speakers, check whether the output is fixed or adjustable. If I want to connect speakers or another digital source as well as headphones, I need suitable inputs and outputs with clear volume control. Additional connections and control options are the top priority for around 14% of consumers.

Common selection mistakes

  • Confusing a USB audio input with USB power

    A device can receive audio over USB and still need a separate power supply. FiiO specifies an external 12 V power supply for the K11, while the iFi ZEN DAC 3 manual also describes power via the USB cable.

    Check the manual for the specific model, and look at the power requirements separately from the audio inputs.

  • Assuming a dongle delivers its maximum output from any USB port

    FiiO says the KA17’s maximum specified output depends on having sufficient power from the USB port or an additional power source.

    Compare output specifications only for the relevant connection and stated operating conditions. Also check the power available from your source device.

  • Assuming a 4.4 mm output works with every pair of headphones

    The models described have different 3.5 mm, 6.35 mm and 4.4 mm sockets; these connections aren’t interchangeable.

    Before buying, compare your headphone plug with the available outputs. You may need an additional headphone cable with the right plug.

    So check whether your existing cable will do the job or whether you need a cable with a suitable plug.

  • Treating a fixed line output as an adjustable output

    According to the iFi ZEN DAC 3 manual, the “Fixed” setting bypasses the volume control for the rear output.

    Check which device controls the volume, and start at a low level before switching settings.

Brands to consider

FiiO

The examples covered range from compact USB dongles such as the KA13 and KA17 to the K11 desktop unit. These models differ in their power requirements and connections.

  • FiiO specifies two headphone sockets for the KA13, as well as PCM up to 32 bit/384 kHz and DSD256.
  • The K11 requires an external 12 V power supply. The KA17’s maximum output depends on having sufficient USB power or an additional power source.

iFi audio

The models covered here include the USB-powered ZEN DAC 3 desktop DAC, the battery-powered hip-dac 3 and the GO bar USB dongle.

  • The ZEN DAC 3 manual lists headphone and analogue outputs, as well as power via a USB cable.
  • With “Fixed” selected, the volume control is bypassed for the rear output. The up-to-12-hour battery life quoted by iFi for the hip-dac 3 is a manufacturer’s claim and doesn’t automatically apply when using other models.

Chord Electronics

The Mojo 2 is a portable DAC headphone amplifier for anyone considering battery power and a choice of digital inputs.

  • Chord lists USB-C, Micro-USB, optical and coaxial inputs, as well as 3.5 mm and 4.4 mm headphone outputs, for the Mojo 2.
  • Check the charging connections and how to connect the unit to your source device for your intended use. The connection specifications don’t state a particular battery life.

RME

The ADI-2 DAC FS is a feature-rich option for a dedicated listening spot if you need a separate IEM output and DSP, and can use an external power supply.

  • RME lists USB and SPDIF inputs, as well as headphone and IEM outputs.
  • The unit needs an external power supply, so it isn’t a straightforward option if you don’t have a spare socket.

Products to suit you at Joybuy

Products to suit you coming soon.

Frequently asked questions

Do I need a source device as well as a DAC to play my hi-res files?

Yes. With the USB DACs described here, a connected computer, smartphone or other suitable device selects and plays the files. Check the connection and the DAC’s supported file formats. A high format specification on its own doesn’t confirm that your playback chain is set up correctly.

How do I set up a USB-powered desktop DAC with active speakers?

According to the manual, the iFi ZEN DAC 3 can be powered via its USB cable and has rear analogue outputs for active speakers. Before switching it on, check whether “Fixed” or “Variable” is selected. With “Fixed”, the DAC’s volume control is bypassed for the rear output. Start at a low level.

What ongoing requirements and other considerations should I bear in mind?

If you choose a battery-powered device, factor in the need to recharge it, and check whether any required power supply is included. The iFi ZEN DAC 3 manual states that the separate 5 V power supply isn’t included. When you buy from a trader in the EU, EU consumer information states that you have a legal guarantee of at least two years from the seller. This is separate from any manufacturer’s warranty.

Can a more powerful headphone amplifier damage your hearing?

Hearing risk depends on factors including volume and listening time, not just the amplifier’s power rating. The World Health Organization explains that the safe listening time decreases as sound levels rise. If you’ve changed the gain, start at a low volume, especially the first time you use it. A milliwatt rating alone doesn’t tell you the measured sound level at your ear.