Who scans historic maps?

Collectors of large single-sheet maps

If you want to keep the legend and map borders in a single image wherever possible, measure the original in both directions and compare it with the usable capture area of the specific model.

Owners of delicate atlases

With bound maps, careful handling comes first: their condition, suitable supports and a safe opening angle matter more than a quick scan. The Coordination Office for the Preservation of Written Cultural Heritage recommends flatbed scanners only for loose-leaf collections.

Readers of fine map details

If small place names, lines or marginal notes matter, check a test scan at the intended viewing or print size. The VIISAN S21’s advertised output of up to 600 dpi is software-interpolated; that alone does not show how well it reproduces fine map details.

What matters when choosing?

When scanning historic maps in a hobby room, your choice mainly depends on whether size, the condition of the original, level of detail, workspace or your file-handling process matters most to you.

A2 overhead scanner

A good fit if: the map, including the borders you want, fits within the usable capture area and you want to scan it from above.

Bear in mind: Allow space to lay out the map. According to the manufacturer, the VIISAN S21’s advertised output of up to 600 dpi is software-interpolated.

A3 overhead book scanner

A good fit if: bound maps or atlas pages fit entirely within the capture area and you don’t want to press them against a flatbed.

Bear in mind: A3 won’t fit every map. For bound originals, also check the fold, borders and the results of the book-page correction.

A3 flatbed scanner

A good fit if: you mainly need to scan sturdy, loose maps that can be placed fully and safely on the scanner.

Bear in mind: Larger maps may not fit in a single scan. Delicate bindings are not a reason to press pages against the glass.

Archive scanning station

A good fit if: the size or condition of the original exceeds what a hobby-room scanner can handle.

Bear in mind: A large-format system can take up a lot of space and be heavy; depending on the original, a professionally supervised digitisation service may be a better option.

Buying priority What to look for when buying Who particularly values this?
Capturing the full map Compare the map’s dimensions, including the borders you want, with the model’s usable capture area. If I want to keep the legend and borders in one image wherever possible, I check the actual dimensions rather than relying on the format label. Around 25% of consumers put capturing the full map first.
Protecting the original Check the condition, safe positioning and opening angle before choosing between an overhead and a flatbed scanner. With fragile or bound maps, I want to avoid putting the original under strain to scan it. Around 25% of consumers prioritise protecting the original.
Fine lines and lettering Test a representative map at the intended size; don’t assume interpolated output figures represent optically captured detail. If small place names or marginal notes need to remain legible, what matters to me is an image of my own map. Around 20% of consumers put detail reproduction first.
Workspace Allow separate space for the scanner and for the map while it is laid out during scanning. If my hobby room has limited workspace, there needs to be room for the map as well as the scanner. Around 15% of consumers prioritise the available workspace.
Scanning and file management Check image edges and folds, and think about how you’ll save maps and find them again later. With several maps, I want a repeatable process for scanning, checking and finding the files again. Around 15% of consumers focus mainly on this workflow.

Avoiding mistakes when choosing a scanner

  • Assuming A3 or A2 guarantees the whole map will fit

    The format label is no substitute for comparing the map’s actual dimensions with the usable capture area. If the legend or border is cut off, you may need extra scans and additional editing.

    Measure your largest original in both directions and compare the figures with the specifications for the model.

  • Mistaking interpolated dpi for optically captured map detail

    For the VIISAN S21, the manufacturer distinguishes between the sensor specifications and the software-interpolated output. A high output figure alone doesn’t show whether small lettering will be legible in the finished map image.

    Test one of your own maps with fine lines and small lettering at the size you plan to use the result.

  • Pressing a delicate atlas binding flat to scan it

    A book-edge or flatbed feature doesn’t mean every delicate binding can be positioned safely. The Coordination Office for the Preservation of Written Cultural Heritage recommends flatbed scanners for loose-leaf collections. The U.S. National Archives advises using suitable supports for bound originals and avoiding force when opening a binding.

    Check the condition and make sure the original is safely supported first. For at-risk originals, consider having them digitised under professional supervision.

Relevant brands at a glance

VIISAN

The S21 is an A2 overhead scanner for larger maps and bound originals; these details apply to this model.

  • VIISAN describes the S21 as offering A2 capture and book-page correction.
  • The advertised output of up to 600 dpi is software-interpolated. Check the results with fine map details.

CZUR

The ET range includes A3 overhead scanners; the ET24 Pro is a model-specific example with book-page correction.

  • CZUR describes contactless capture and correction for curved book pages.
  • A3 won’t fit every historic map. The manufacturer’s description is not an independent test of line or colour accuracy.

Ricoh ScanSnap

The SV600 is an A3 overhead scanner for books and other suitable originals.

  • Ricoh lists book correction and page-turn detection for the SV600.
  • Check the capture area and fold with your atlas; these specifications don’t automatically apply to other ScanSnap models.

Plustek

The OpticSlim 1180 is an A3 flatbed scanner, while the OpticBook A300 Plus offers a separate book-edge option.

  • The scan area and features vary by model; compare them with the size and condition of your originals.
  • A book edge doesn’t increase the capture area. A flatbed also doesn’t solve the handling challenges of delicate bindings.

Zeutschel

The OS A1 is a professional large-format solution; one version is described as featuring a book cradle.

  • Zeutschel specifies capture up to A1, depending on the camera and lens.
  • Weigh up the space and weight against your hobby-room setup. The A1 specification alone doesn’t guarantee that every original can be handled safely.

Joybuy products for historic maps

Related products coming soon.

Frequently asked questions

What should I measure before choosing a scanner?

Measure your largest map in both directions, including the borders you want to keep. Compare the measurements with the usable scan or capture area of the specific model; A2 or A3 alone doesn’t tell you exactly what will fit in the image.

How should I scan a fragile atlas?

First check its condition and safe opening angle, support the binding appropriately and don’t press it against the glass for a flatbed scan. If it is damaged or you’re unsure how to handle it, professional digitisation is one possible alternative.

Does OCR make a historic map reliably searchable?

Some of the models mentioned offer text recognition or searchable PDFs, but check any recognised small or unusual labels against the map image. Keep the image regardless of whether the text has been captured by machine.

What legal rights do I have when buying a scanner online?

When you buy goods from a trader, you have a legal guarantee of at least two years from the date you receive them. Distance sales generally come with a 14-day right to cancel from delivery, although exceptions may apply. Both are separate from a voluntary manufacturer’s guarantee, as explained by the EU’s Your Europe portal.

Can I scan historic maps in Germany for personal use and put them online?

Under the conditions set out in § 53 para. 1 UrhG, you may make individual copies for private use unrelated to commercial activity; this does not amount to blanket permission to publish them online. The German Patent and Trade Mark Office explains that copyright protection generally expires 70 years after the author’s death. Special rules under § 53 para. 4 UrhG also apply to maps in books.