Which scanner is right for you?

Users with large, single-sheet maps

If you want to capture a map with its legend and margins in one scan, compare its actual dimensions with the capture area. VIISAN lists A2 for the S21, while book2net gives the Folio a scan area of 736 × 523 mm.

Those caring for fragile map books

For bound or fragile originals, their condition, a suitable support and a safe scanning process should take priority over speed alone. The German Federal Archives and other specialist institutions treat preservation as an important part of digitisation.

Teams sharing a desk

If several people use the same workspace, allow room not just for the device but also for the map laid out in full. Shared settings and a visual check of the legend and margins help make the process repeatable.

What should you look for when buying?

Compact A3 overhead scanner

A good fit if: the entire map fits within the usable capture area and you want to free up the desk again after scanning.

The trade-off: A larger map cannot be captured in full in a single A3 scan.

A2 desktop overhead scanner

A good fit if: you want to capture maps within the stated A2 capture area and have room for both the device and the original.

The trade-off: A2 coverage alone does not guarantee that the finest map lettering will be legible or that the scanner is suitable for handling bound originals.

Archival system with book cradle

A good fit if: fragile bound maps or unusual sizes call for a suitable support and a supervised process.

The trade-off: The support, glass option and opening angle must suit the original. Make sure you allow for the actual footprint at a shared desk.

Priority What to check before buying Who is this especially important to?
Capturing the full size Measure the largest map, including the margins you need, and compare both dimensions with the specific model’s capture area. Don’t infer support for unusual sizes from the format name alone. If I need the whole map, including its legend, in one scan, I check the usable area first. Around 30% of consumers put full-size capture first.
Protecting fragile originals Have the condition and permitted opening angle assessed; check that the support, glass option and handling are suitable for the type of original. For a fragile or bound original, I want to know in advance how it can be safely supported and opened. Around 30% of consumers prioritise protecting the original.
Fine map details Scan a typical map and assess small labels, lines, margins and colours in the result; distinguish between optical and interpolated specifications. If small place names and lines need to remain legible, the finished image matters more to me than a single dpi figure. Around 20% of consumers put the clarity of fine details first.
Shared workspace Allow room for the device and the map laid out in full; agree shared settings, computer connections and file-naming conventions. If several people use the same desk, I need a practical set-up and a clear process. Around 20% of consumers prioritise organising a shared workspace.

Common selection mistakes

  • Assuming the format name matches the actual capture area

    Historical maps may not conform to standard DIN sizes. A cropped legend or missing margin can make a scan unsuitable for its intended purpose.

    Measure the width and height of your largest map, including the margins you need, and check both measurements against the capture area.

    Depending on the map size, you may need extra scans and post-processing.

  • Mistaking interpolated output for optically captured detail

    For the VIISAN S21, the manufacturer distinguishes between optical sensor pixels and interpolated output figures. A higher output figure therefore does not automatically mean that finer map details have been captured optically.

    Assess a representative scan with fine lettering and lines instead of comparing only the highest output setting.

  • Assuming contactless scanning automatically means gentle handling

    Opening, supporting and, where necessary, pressing down on a fragile original can also affect it. The German Federal Archives’ guidance treats preservation as a distinct part of digitisation planning.

    Have the condition and permitted handling assessed. Use glass and V-shaped supports only if they suit the specific original.

Brands to consider

VIISAN

The S21 is a desktop overhead option for maps that fit within its stated A2 capture area.

  • The manufacturer specifies A2 capture and a 20.1 MP sensor.
  • Optical sensor pixels and interpolated output are different specifications; assess fine map details in the scan itself.

CZUR

The ET24 Pro is an overhead option for bound and loose originals when A3 is large enough for your maps.

  • The manufacturer describes curve correction and A3 capture for the ET range.
  • A larger map won’t fit in a single scan just because the device is designed for bound originals.

ScanSnap

The SV600 is an overhead option for historical documents and maps up to A3.

  • The manufacturer specifies book-page correction and compatibility with PC and Mac.
  • The stated optical resolutions vary by scan direction; higher output figures in some modes do not automatically mean higher optical detail resolution.

book2net

The Folio is an archival option for historical maps and originals that don’t conform to standard DIN sizes.

  • The manufacturer specifies a scan area of 736 × 523 mm and a book cradle.
  • The V version is available on request. Check the configuration and the space required at a shared desk in advance.

Image Access

The BookTEK 5 V2 Archive is designed for supervised digitisation workflows involving bound originals up to the A2+ size stated by the manufacturer.

  • The manufacturer describes a self-adjusting book cradle, as well as V and flat modes with different glass options.
  • These features don’t tell you whether the system will fit on your shared desk.

Suitable products on Joybuy

Related products will be available soon.

Frequently asked questions

Is an A3 book scanner big enough for my historical map?

Only if the entire map, including the margins you need, fits within the specific device’s capture area. The manufacturer specifies up to A3 for the ScanSnap SV600 and CZUR ET range. For larger single scans, look for a bigger capture area.

How should we set up the scanner for several users?

Allow room for the device and the original laid out in full. Before starting a batch, agree shared settings and file names, then check the legend and margins in the results. Whether the computer and connection are suitable depends on the model you choose.

Does the stated dpi figure prove that small place names will be legible?

No, a single dpi figure doesn’t prove that. VIISAN’s S21 specification distinguishes between optical sensor pixels and interpolated output; ScanSnap gives different optical figures for the SV600 depending on the scan direction. So check a typical map in the finished image.

What should we check is included before ordering?

Check what’s included in the specific offer, such as the book cradle, glass option, software and support. The manufacturer says the V version of the book2net Folio is available on request; Image Access describes different glass options for the BookTEK.

Can we scan historical maps and share the files?

A map’s age alone doesn’t answer this question. Section 64 of the German Copyright Act (UrhG) generally provides that copyright expires 70 years after the author’s death. Section 60e of the UrhG contains specific rules, subject to certain conditions, for libraries that do not pursue direct or indirect commercial purposes. Whether these rules apply to a particular map and intended use depends, among other things, on authorship, rights, the institution and the purpose of use. A scan does not automatically grant permission to publish the map freely.