First, measure your largest map, including the margin you need, and check whether it is loose, bound or fragile. This will help you decide whether a flatbed, an A3/A2 overhead scanner or a supported archival system is right for you. Check small place names and lines using a test scan at its original size; a larger capture area or software-interpolated dpi figures alone do not guarantee that fine details will be reproduced clearly. If several people will use the scanner, compatible software and a repeatable checking process also matter. Before publishing a scan, make sure you have the rights to use that particular map.
Which scanner is right for your group?
Groups with large individual maps
If you want to capture maps as fully as possible, including the legend and margins, compare the sheet dimensions with the actual capture area. VIISAN lists the S21 as A2; book2net gives the Folio's capture area as 736 × 523 mm.
Those caring for fragile map volumes
For bound or fragile originals, the condition of the item, its opening angle and the support provided all need to be considered together. The Coordination Office for the Preservation of Written Cultural Heritage recommends flatbed scanners only for loose sheets.
Teams creating a usable map archive
If several people will be scanning, you need an agreed process for software, file naming and image checks. The Federal Archives notes that the resolution required depends on how the scan will be used.
What should your group look for when buying?
A3 flatbed scanner
A good choice if: Your maps are loose, sturdy and fit within the glass area.
Consider: Pressing bound or fragile originals against the glass can be problematic, and larger maps may not fit in a single scan.
A3 overhead book scanner
A good choice if: You need to scan bound maps without pressing them down and they fit fully within the capture area.
Consider: The A3 limit rules out larger maps in a single scan. Automatic book-page correction does not guarantee that map lines will remain to scale.
A2 overhead scanner
A good choice if: You need to capture maps up to the stated scan area in one pass, without placing them under glass.
Consider: VIISAN's advertised output of up to 600 dpi is software-interpolated and does not guarantee the same level of optical detail.
Archival overhead system with a suitable support
A good choice if: Fragile bound maps need support, or an unusual historical format calls for a larger capture area.
Consider: The opening angle, support, glass option and items included must all be suitable for the specific original and the product offer.
| Priority |
What to check before buying |
Who is it most important for? |
| Capturing large maps in full |
Measure the sheet and the margin you need; compare the dimensions with the usable capture area. VIISAN lists the S21 as A2, while book2net gives the Folio's dimensions as 736 × 523 mm. |
If I want to preserve the legend and margins in one scan, I check the area on the specific model. Around 29% of consumers are likely to prioritise capturing large maps in full. |
| Protecting fragile or bound originals |
Assess the condition and opening angle, and check whether the proposed support is suitable for the original. The KEK recommends flatbed scanners only for loose sheets. |
If a map is fragile or bound, I want to avoid putting unnecessary strain on it and need suitable support. Around 29% of consumers are likely to prioritise protecting the original. |
| Making small text and lines legible |
Test a typical map at its original size. VIISAN lists a 20.1-megapixel sensor for the S21 and output of up to 600 dpi through interpolation; the Federal Archives says the resolution needed depends on how the scan will be used. |
If small place names and lines need to remain legible, I check them directly in the saved test scan. Around 24% of consumers are likely to make fine map details their main priority. |
| A shared scanning process |
Test the software on the group computer and agree on file naming and visual checks. CZUR publishes its own system requirements for the ET24 Pro. |
If several people are building an archive that everyone can use consistently, I need a repeatable process and compatible software. Around 18% of consumers are likely to prioritise this shared workflow. |
Which mistakes should you avoid?
-
Assuming A3 or A2 will be large enough without checking
The legend or margins may fall outside the actual usable capture area.
Measure your largest map, including the margin you need, and compare it with the stated scan area for the exact model.
If the map does not fit fully in the capture area, you may need to take several scans and spend extra time editing them.
-
Pressing fragile bound maps against a flatbed
Pressing down on a map can put strain on its cover or binding. The KEK recommends flatbed scanners for loose sheets.
Assess the condition and opening angle before scanning, and check whether suitable, gentle support is available.
-
Treating interpolated dpi figures as proof that details will be legible
VIISAN's advertised output of up to 600 dpi for the S21 is software-interpolated. On its own, it does not guarantee that small text or lines will be reproduced clearly.
Scan a typical original and check the smallest relevant place names and lines in the saved image.
If details are not legible, you may need to scan the map again and carry out further image checks.
-
Assuming an older product page reflects what's currently on offer
Epson Germany lists the Expression 13000XL as discontinued, even though its technical specifications are still visible.
Use older model details only as a guide to the type of scanner, and check any specific offer separately.
Key brands to consider
VIISAN
The S21 is an A2 overhead scanner for larger maps and bound originals.
- VIISAN lists a 20.1-megapixel sensor for the S21, along with book-page and OCR features.
- The advertised output of up to 600 dpi relies on software interpolation. Check small map details against the original.
CZUR
The ET24 Pro range is an A3 overhead scanner option for bound maps, provided the whole sheet fits in the capture area.
- CZUR lists book-page correction for the ET range and publishes software requirements for the ET24 Pro.
- The A3 limit rules out larger maps in a single scan. A correction feature does not guarantee that map geometry will remain to scale.
Plustek
The OpticSlim 1180 is an A3 flatbed option for loose, sufficiently sturdy maps.
- Plustek gives a scan area of 297 × 431,8 mm and an optical resolution of 1.200 dpi.
- The KEK does not recommend flatbed scanners as a blanket solution for fragile bound collections.
book2net
The Folio is an archival overhead system for historical maps and formats that fall outside today's DIN dimensions.
- book2net lists a scan area of 736 × 523 mm and a book cradle.
- This does not guarantee that every oversized map will fit. According to the manufacturer, a V version is available on request; check the specific configuration.
Image Access
The BookTEK 5 V2 Archive is designed for supervised digitisation projects involving fragile bound originals, up to the stated A2+ size.
- Image Access describes a self-adjusting book cradle, with flat and V-shaped scanning options.
- The right glass and support configuration must suit the specific item and product offer.
Joybuy products
Related products coming soon.
Frequently asked questions
Can we put a historical map online just because it is old or belongs to us?
No, that does not automatically give you permission to publish it. According to the German Patent and Trade Mark Office, copyright protection depends on the specific work and generally ends 70 years after the creator's death. Copying a protected map for internal use is different from publishing it online. Check the rights and terms for the specific original before sharing it.
Can we rely on the private-copying rule when sharing scans?
Not as a blanket rule. Section 53 of the German Copyright Act (UrhG) allows individual copies to be made for private or other personal use, subject to certain conditions, and states that such copies must not be distributed or used for public reproduction. You will need to check separately whether another permission or licence covers your society's specific use.
How do we set up a scanner for shared use?
Check the software for the exact model on the computer you plan to use, and test the whole process through to saving the file. CZUR publishes its own system requirements for the ET24 Pro; these details cannot be applied to other models.
How should we check our scans after capturing them?
Compare a typical saved scan with the legend, margins and smallest relevant label. Agree on consistent settings and a visual check for the group. The details you need to retain in the digital copy will depend on how it is going to be used.
What should we check about the book support and glass before ordering?
Check the specific offer to see whether it includes the book support, glass option, software and assistance you need. book2net says the V version of the Folio is available on request; Image Access describes different glass options for the BookTEK 5 V2 Archive.