An A4 flatbed scanner is sufficient for historical maps in student accommodation if the loose, sturdy-enough maps fit on the scanning area, including any margin you want to keep. For larger loose maps, consider an A3 scanner if you have enough space. For fragile, bound or particularly valuable originals, a gentler capture method should take priority: the Coordination Office for the Preservation of Written Cultural Heritage recommends flatbed scanners only for loose collections of sheets, and suggests overhead scanners or cameras as alternatives for vulnerable items.
Which option is right for you?
Students with larger loose maps
If you regularly want to capture larger maps without taking several scans, look at an A3 flatbed scanner and allow space for both the device and the map. Plustek lists a maximum scanning area of 297 × 431,8 mm for the OpticSlim 1180.
Students with limited space for scanning
If your loose maps fit on an A4 scanning area and you want to clear your desk afterwards, a more compact A4 model may be enough. Canon lists a maximum scanning area of 216 × 297 mm for the CanoScan LiDE 400.
Students with delicate originals
Before buying, check whether a flatbed scanner is a suitable way to capture fragile or bound maps. The Coordination Office for the Preservation of Written Cultural Heritage recommends flatbed scanners for loose collections of sheets.
What should you look for when buying?
A4 flatbed scanner
A good fit if: The loose maps you regularly use fit fully on the scanning area, including any margin you want to keep.
Trade-off: Larger originals may need several scans, with more work to align and stitch them together.
A3 flatbed scanner
A good fit if: You regularly scan larger loose maps that fit within the stated scanning area.
Trade-off: Allow space for the device, the map and the power supply. An A3 scanner won’t necessarily accommodate every map size.
A gentler capture method
A good fit if: The original is fragile, bound or otherwise unsafe to place on the glass.
Trade-off: Overhead capture or digitisation by a relevant institution may involve extra organisation.
| Consideration |
What to check when buying |
Who is this important to? |
| Scanning area and multiple scans |
Measure the map, including any margin you want to keep, and compare both dimensions with the stated maximum scanning area. |
If I want to capture a map in as few pieces as possible, the usable area is key; around 31% of consumers prioritise scanning area and avoiding multiple scans. |
| Protecting the original |
Check whether the map is loose and sturdy enough to place on the scanner; for archival material, check the requirements of the institution holding it. |
With a fragile or bound original, I want to avoid damage from placing it on the scanner or moving it; around 25% of consumers focus above all on protecting the original map. |
| Space and connectivity |
As well as the scanner itself, allow space to open it and move the map, and check what power supply it needs. |
If I share my desk with other study tasks, the device and its connection need to fit into my workspace; around 25% of consumers prioritise space requirements and connectivity. |
| Image detail and output |
Use a suitable original to check that small labels remain legible in the output you need; note that Canon specifies a smaller maximum scanning area for the LiDE 400 at higher scan resolutions. |
For maps with fine place names and legends, I want to be able to make out the details reliably later; around 19% of consumers focus on image detail and file output. |
Common buying mistakes
-
‘A3’ means there’s no limit on map size
The usable area of an A3 device is limited too. Plustek lists a maximum of 297 × 431,8 mm for the OpticSlim 1180.
Before choosing, measure both sides of the largest map you use regularly and compare them with the stated scanning area.
-
You can simply press a delicate map against the glass
Applying physical pressure may not be suitable for vulnerable or bound items. The Coordination Office for the Preservation of Written Cultural Heritage recommends flatbed scanners for loose collections of sheets.
For vulnerable originals, first consider gentler overhead capture. If the item belongs to an archive or library, ask the institution holding it about its requirements.
-
Comparing maximum resolution alone
A high maximum resolution on its own doesn’t tell you whether the original can be placed safely on the scanner or whether the scanning area is large enough. Canon notes that a higher scan resolution reduces the maximum possible scanning area on the LiDE 400.
Check the scanning area and how the original is handled first. Then use a suitable test scan to see whether the details you need are visible in your intended output format.
-
Estimating space based on the glass area alone
As well as the scanner itself, you’ll need clear space to place and move the map. Plustek lists dimensions of 589 × 407 × 68 mm for the OpticSlim 1180, and says it needs a separate power supply.
Make sure you have room for the device, open lid, map and connections together in your chosen spot.
Suitable brands and models to help you choose
Canon
The CanoScan LiDE 400 is an A4 option for loose maps that fit within its stated scanning area. Canon lists a maximum of 216 × 297 mm.
- Canon lists USB power, five scan buttons and the option to stand this model upright.
- The A4 scanning area limits the size of each scan. According to Canon, the maximum possible scanning area may be smaller at higher scan resolutions.
Epson
The Perfection V39II is an A4 option with a built-in stand; the WorkForce DS-51000WN is an A3 model for shared workspaces.
- Epson lists USB power and a built-in stand for the V39II. For the DS-51000WN, Epson lists A3 scanning, networking and Wi-Fi.
- The DS-51000WN’s networking features aren’t necessarily needed for a single student scanning station. Each set of specifications applies only to the model named.
Plustek
The OpticSlim 1180 is an A3 flatbed scanner for larger loose maps, provided you have enough workspace.
- Plustek lists a maximum scanning area of 297 × 431,8 mm, 1.200 dpi optical resolution, and PDF and OCR features.
- According to Plustek, the device measures 589 × 407 × 68 mm and needs a separate power supply. A manufacturer’s statement that it is suitable for historical documents does not mean it is approved for fragile originals.
Joybuy products
Related products will be available soon.
Frequently asked questions
Is A4 big enough for my map?
Only if the area you need to capture, including any margin you want to keep, fits on the usable scanning area. Canon lists a maximum of 216 × 297 mm for the LiDE 400, so remember to measure the margins you want to retain too.
Can I press a fragile or bound map against the glass?
You shouldn’t assume that this is standard practice for flatbed scanning. The Coordination Office for the Preservation of Written Cultural Heritage recommends flatbed scanners for loose collections of sheets, and suggests overhead scanners or cameras without flash as gentler alternatives for vulnerable items.
What resolution should I use?
Choose the actual scan resolution based on the smallest labels and the size at which you plan to view or print the map. The Federal Archives gives 400 ppi at original size as the standard for its own digital copies; this isn’t a general minimum requirement for student scans.
What should I check before setting it up with my laptop?
Check that your available port and operating system match the driver specifications for the exact model. Canon lists USB Type-C and USB power for the LiDE 400; Plustek lists USB 2.0 Type B and a separate power adapter for the OpticSlim 1180.
Can I put a historical map online after scanning it?
Not automatically. The age of a map and the fact that you scanned it yourself don’t in themselves give you the right to publish it. The Federal Archives notes that its permissions for re-use don’t automatically apply to third parties. Whether you can use a particular map in a particular way depends on the relevant rights and circumstances.
Can I take a map from the Federal Archives home and scan it myself?
There’s no general right to do this. Under the Federal Archives’ user regulations, the archive decides how its collections may be consulted; original items are generally made available at the Federal Archives only. Other institutions have their own rules for their collections.