Who needs to make this decision?

Teachers with large individual maps

If you want to show map details and labels in class, measure your largest original and check that its edges will all be captured. VIISAN describes the S21 as a scanner for originals up to A2; Zeutschel specifies an A2+ capture area for the OS Q2.

Those responsible for delicate atlases

Before scanning bound historical maps, assess the original’s condition, its permitted opening angle and how it will be supported. The Bundesarchiv and specialist bodies recommend handling archival and library materials appropriately and with care.

Teams sharing a small workspace

If several people will be using the scanner, you’ll need space for the map, for operating the device and, where necessary, for a computer. Zeutschel gives the OS Q2 a footprint of 1.116 × 1.046 mm; you’ll need additional space for the original.

What should you look for when buying?

Compact A3 overhead scanner

A good fit if: Your largest maps and open originals fit within the capture area of the specific model.

Consider: CZUR lists A3 as the maximum format for its ET range, so larger maps cannot be captured in full.

A2 overhead scanner

A good fit if: You need to capture maps up to the stated A2 capture area in full and have enough room for both the device and the original.

Consider: VIISAN describes the S21’s output of up to 600 dpi as software-interpolated; this figure alone does not demonstrate optical detail resolution.

Scanner with a suitable book cradle

A good fit if: You need to digitise bound, delicate materials under supervision and have room for the required cradle.

Consider: A book cradle or a particular opening mode is no substitute for assessing the individual original.

Priority What to check before buying Who is it most relevant to?
Capture large maps in full Measure your largest map and, where relevant, an open double-page spread. Compare the dimensions with the capture area of the exact model. CZUR lists A3 for its ET range; VIISAN specifies A2 for the S21. If I don’t want to lose the edges of my maps, I’ll compare both sets of dimensions before choosing. Around 33 % of consumers put capture size first.
Protect delicate originals Assess the original’s condition and how far it can safely be opened, then choose the cradle and handling method accordingly. Image Access describes the BookTEK 5 V2S as having a V-shaped book cradle with a 120-degree mode; this is not a blanket approval for every atlas. If I have a fragile atlas or one that is difficult to open, my main concern is avoiding opening or supporting it in a way that is unsuitable for scanning. Around 27 % of consumers prioritise protecting the original.
Keep text and map colours clear Test-scan a representative map with fine lines and small place names, then check the result on the screen you intend to use. VIISAN describes the S21’s output of up to 600 dpi as software-interpolated. If small labels and lines need to be legible in class, I’ll check the finished image rather than relying on a resolution figure alone. Around 20 % of consumers focus primarily on the readability of image detail.
Use a scanner in a small classroom Measure the work surface, including space for the map when spread out and room to operate the scanner. Zeutschel gives the OS Q2 a footprint of 1.116 × 1.046 mm; if software is involved, also check the specific model’s requirements against the computer. If several people share the workspace, I need room for the device, the original and its operation at the same time. Around 20 % of consumers prioritise available workspace and workflow.

Common buying mistakes

  • Assuming a “book scanner” can handle every map

    The capture area varies by model. A map that exceeds the stated format cannot be captured in full in a single scan.

    Measure the width and height of your largest map before choosing, then compare both measurements with the capture area of the specific model.

    An original that is too large may need to be rescanned or digitised using another method.

  • Confusing software-interpolated dpi with optically captured detail

    VIISAN describes the S21’s output of up to 600 dpi as software-interpolated. The output figure alone therefore doesn’t show how clearly fine text and lines will appear in a scan.

    Scan one of your own maps with small labels, then check the finished image on the screen you intend to use it on.

    If fine text isn’t legible in the result, you may need to edit the image or scan it again.

  • Planning for the device alone rather than the whole workspace

    As well as room for the scanner, you’ll need space for the map when laid out, for operating the device and, where necessary, for a computer. Zeutschel gives the OS Q2 a footprint of 1.116 × 1.046 mm, excluding any additional workspace.

    Sketch out the usable table space with your largest original and the computer you plan to use before choosing a model.

    If your existing table is too small, you may need an additional suitable work surface.

Key brands at a glance

VIISAN

VIISAN describes the S21 as an overhead scanner for books and maps up to A2.

  • The manufacturer lists book-page correction and OCR.
  • The stated output of up to 600 dpi is software-interpolated and is not independent evidence of optical detail reproduction.

CZUR

According to the manufacturer, the ET range is designed for book scanning with page correction, provided A3 is a sufficient capture format.

  • CZUR publishes operating system and computer requirements for the ET24 Pro.
  • A3 is not large enough to capture bigger maps in full; check correction and image quality using one of your own originals.

Image Access

The manufacturer positions the BookTEK 5 V2S as a professional A2+ option for supervised collections and bound originals.

  • Image Access describes a self-adjusting V-shaped book cradle and a capture mode at 120 degrees.
  • Whether the opening angle is suitable for a particular binding depends on the condition of the original.

Zeutschel

According to the manufacturer, the OS Q2 is an A2+ overhead scanner for a digitisation workspace planned to accommodate it.

  • Zeutschel lists colour output and optional book supports.
  • Allow for its stated footprint of 1.116 × 1.046 mm when planning a small classroom.

Ricoh ScanSnap

According to its data sheet, the SV600 is a contactless option for books and originals up to A3.

  • The manufacturer’s data sheet describes automated processes for turning pages.
  • The stated A3 capture size does not demonstrate suitability for larger maps or approval to scan delicate originals for conservation purposes.

Suitable products on Joybuy

Suitable products will be available soon.

Frequently asked questions

Does every historical map need to be scanned at A2?

No. Compare the width and height of the largest map you actually need to scan with the capture area of the specific device. CZUR lists A3 for its ET range, while VIISAN lists A2 for the S21.

How should I handle an atlas that is difficult to open?

First assess the original’s condition and how far it can safely be opened. Image Access describes the BookTEK 5 V2S as having a V-shaped book cradle for a 120-degree mode; that doesn’t mean every atlas is approved for opening that far.

What should I check before setting up the classroom computer?

Check that the operating system, installation requirements and intended output workflow are compatible with the software for the specific model. For example, CZUR publishes system requirements for the ET24 Pro software.

What ongoing tasks should the school plan for?

Allow time to prepare originals, check image edges and manage files. A professional scanner may also need a suitable book cradle and an appropriate workspace.

Can I use scans of protected maps in class or make them freely available online?

Subject to certain conditions, § 60a UrhG permits some uses to illustrate non-commercial teaching, generally up to 15 % of a published work; subsection 2 provides an exception allowing illustrations to be used in full. The law also sets out who may receive the material and the applicable exceptions, but it does not give blanket permission to publish it freely. Check the rights for the specific map. Under § 64 UrhG, copyright generally expires 70 years after the author’s death; the applicable legal status of the work is what matters. Source: Gesetze im Internet, Federal Ministry of Justice and Federal Office of Justice.