Which type of equipment is right for you?

Solo listeners comparing recordings

You compare existing recordings at your desk and need controlled playback that suits your computer and headphones. FiiO and RME document a range of connections and adjustment options for their respective products.

Listening together

You want to listen to the same recording at the same time through several pairs of wired headphones, with a separate volume control for each. ART Pro Audio specifies four independently controlled output channels for the HeadAmp 4.

Recording from your home office

You want to do more than listen to recordings: you also want to connect a microphone or instrument. Focusrite documents the relevant inputs for the fourth-generation Scarlett 2i2.

What should you look for?

Choose your equipment based on whether you want to listen to digital audio on your own, share the same signal with several people or record as well.

Desktop DAC with headphone amplifier

Right for you if: You mainly listen on your own to existing files from a computer or a compatible digital source.

What to consider: Inputs, headphone outputs and controls vary by model, so check they suit your source and headphones.

Analogue headphone splitter

Right for you if: You already have a suitable audio source and several people want to listen to the same signal at separate volume levels.

What to consider: An analogue splitter is not a replacement for a USB DAC or microphone inputs.

USB audio interface

Right for you if: You want to record microphones or instruments as well as listen, and need the right inputs to do so.

What to consider: An interface isn’t automatically the best choice as a headphone amplifier. Check its output specifications for your particular headphones.

What you need What to check before buying Who is it important for?
Listening at your desk Computer connection, the digital inputs you need and a compatible headphone output. If I compare recordings on my own at my desk, I need suitable connections and an easy-to-use volume control. Around 36% of consumers would put listening at their desk first.
Several headphones at once Number of outputs, separate volume controls and a suitable existing audio source. If we listen to the same recording through several pairs of wired headphones, I need separate volume controls. Around 29% of consumers would prioritise listening together with individual volume controls.
Recording and monitoring The microphone or instrument inputs you need, as well as the headphone output specifications of the specific interface. If I also want to connect a microphone or instrument in my home office, I need suitable inputs and a compatible headphone output. Around 21% of consumers would prioritise their recording needs.
Fine-tuning for your headphones Output specifications for the headphones you use, and the Gain, equaliser or Crossfeed settings. If I switch between sensitive headphones or different pairs, I want to be able to control the connection and settings. Around 14% of consumers would prioritise tailoring the setup to their headphones.

Pitfalls to avoid when comparing equipment

  • Assuming a headphone splitter is a USB DAC

    An analogue splitter distributes an existing signal, but it doesn’t convert USB audio itself.

    Before you buy, map out the signal path from your computer to your headphones and check that the splitter has a suitable input for your existing source.

  • Assuming similarly named FiiO versions are identical

    FiiO lists different USB connections and supported data rates for the E10K and E10K-Type-C.

    Check the full model name and compare the connection and manufacturer specifications with the version actually on offer.

  • Comparing output power without considering the connection and load

    FiiO gives different power ratings for the K11 depending on whether you use the 6.35 mm or 4.4 mm output and on the headphone load.

    Only compare figures for the output you plan to use and a suitable load. Also take the plug and Gain setting into account.

  • Blaming differences in settings on the recordings

    Tone controls and DSP functions can change how audio sounds. Listening at high volume for extended periods can also damage your hearing.

    Keep the volume and sound settings as consistent as possible when comparing recordings, and start at a low volume after changing headphones.

Key brands to consider

FiiO

Desktop DACs with headphone amplifiers. The K11 is one example, with USB, optical and coaxial inputs.

  • FiiO lists 6.35 mm and 4.4 mm headphone outputs and three Gain levels for the K11.
  • Power ratings vary depending on the output and load. Don’t assume the K5 Pro, K5 Pro ESS, E10K and E10K-Type-C are interchangeable without checking the model version.

Fosi Audio

Compact DAC headphone amplifiers for a range of digital sources. The Q4 is one specific example.

  • According to Fosi Audio, the Q4 has USB, optical and coaxial inputs, a 3.5 mm headphone output and tone controls.
  • If you want to compare recordings with as little alteration as possible, keep an eye on the tone controls. These specifications apply to the Q4.

Focusrite

Audio interfaces for anyone who wants to record as well as listen. One model to compare is the fourth-generation Scarlett 2i2.

  • Focusrite documents recording inputs and a separately controlled headphone output.
  • For the fourth-generation Scarlett 2i2, Focusrite lists a 50 Ω output impedance, with 32 mW at 33 Ω and 22 mW at 300 Ω. Check these figures against your headphones; they don’t apply universally to other generations.

ART Pro Audio

Analogue headphone splitters for use with an existing audio source. The HeadAmp 4 is one example.

  • According to ART Pro Audio, the HeadAmp 4 has four independently controlled output channels.
  • The HeadAmp 4 isn’t a USB DAC. ART Pro Audio specifies an output impedance of 47 Ω for each output.

RME

DACs with a wide range of playback features. RME also describes the ADI-2 DAC FS as suitable for home use.

  • RME lists separate headphone and IEM outputs, along with an equaliser and Crossfeed.
  • Keep these settings consistent for comparable listening conditions. The manufacturer’s description isn’t an independent listening test.

Joybuy products to consider

This selection covers desktop DACs with headphone amplifiers for digital playback on a PC.

Nobsound Q4 USB audio DAC with headphone amplifier and Bluetooth

Nobsound Q4 USB audio DAC with Bluetooth

For digital playback from a PC, with a built-in headphone amplifier.

USB, optical and coaxial inputs; according to the product specifications, suitable for headphones with an impedance of 16–300 Ω. The treble and bass controls can alter the sound, so keep their settings consistent when comparing recordings.

View at Joybuy

Frequently asked questions

Do I need an audio interface to compare existing recordings?

No, not for playback alone: a suitable DAC headphone amplifier gives you a digital input and a headphone output. If you want to record with a microphone or instrument, check that an audio interface has the inputs you need.

Can I connect an analogue headphone splitter directly to a USB computer?

Not in the case of the ART HeadAmp 4: according to ART Pro Audio, it expands the analogue headphone output of an existing source. For digital USB audio, you’ll need a suitable audio output or DAC before it.

What should I check on the headphone outputs?

Check that the output, plug and published power ratings suit your particular headphones. Specifications can vary depending on the connection and load, so a single maximum power figure isn’t enough to compare them.

How can I keep a listening comparison as controlled as possible?

Choose the right input and output, start at a low volume, and keep the volume, Gain and sound settings as consistent as possible. If your equipment has tone controls or DSP, make sure you check those settings. The WHO points out that both volume and the duration of sound exposure affect the risk of hearing damage.

What compliance requirements apply to DAC devices in Germany?

Devices within the scope of the EMVG must meet electromagnetic compatibility requirements, as explained by the Bundesnetzagentur. CE marking is required where the relevant EU rules require it for that product group. Your Europe explains that the manufacturer is responsible for meeting the applicable requirements. This does not establish whether any individual device is compliant.