What should you look for when buying?
First, identify the devices that need to run together to keep your connection working. Then compare the outputs and runtime for their combined load.
| What you need |
What to look for |
Who should pay particular attention? |
| Keeping the whole connection running |
List the necessary devices and power supplies for your own connection, and plug them all into battery-backed outputs. According to the manufacturer, four of the PowerWalker VI 600 MS’s eight Schuko sockets are battery-backed. |
If my connection needs a separate ONT and router, I want to account for both. Around 36 % of consumers prioritise keeping the entire connection running. |
| Runtime under the combined load |
Add up the power consumption of all your devices and look for a runtime figure for that load. Eaton gives 40 minutes as an example for an internet gateway drawing 15 W; this figure won’t necessarily apply to other devices. |
If power cuts vary in length, I want to know how long my devices will run together. Around 29 % of consumers place particular importance on runtime under the actual combined load. |
| A compatible DC connector |
Check the voltage, power requirements, plug size and polarity against the device documentation. For the 3S Mini, Eaton specifies 9 V/3 A, 12 V/3 A, 15 V/2,4 A and 19 V/1,89 A, as well as four barrel plug sizes. |
If I only need to keep one network device running, I want a compact solution that’s an exact electrical match. A suitable power solution for a single device is the main priority for around 21 % of consumers. |
| Battery replacement and disposal |
Look up the exact model number to find out whether a replacement battery is available and check the manufacturer’s instructions. The German Environment Agency recommends using battery collection boxes in shops or local authority collection points to dispose of old batteries. |
If you want to use your UPS for longer and plan to replace the battery, check what’s involved for the specific model. Battery replacement and ongoing costs are particularly important to around 14 % of consumers. |
Joybuy products
Related products coming soon.
Frequently asked questions
Is it enough to connect just the modem to the UPS?
Only if the other devices needed for your connection have their own power supply or are built into the modem. In an FTTH set-up with a separate ONT and router, both active devices on your side need power; the availability of your provider’s equipment also matters.
How should I connect the devices?
Plug the necessary power supplies into sockets explicitly marked as battery-backed. For a direct DC connection, the electrical specifications and connector must match the specific device. According to the manufacturer, four of the eight sockets on the PowerWalker VI 600 MS provide surge protection only.
When should I replace the battery, and how should I dispose of the old one?
There’s no single replacement interval that applies to every model. Check your device’s manual and the recommended replacement battery. The German Environment Agency recommends taking old batteries to suitable collection boxes in shops or local authority collection points, rather than putting them in household waste.
What should I check in product information for Germany?
For mains-powered devices, the German Federal Network Agency lists checks including a correctly affixed CE mark, an identifiable product and manufacturer, and any required instructions and warnings in German. The CE mark doesn’t guarantee a particular UPS runtime.