Which turntable is right for you?

Listeners with existing speakers

If you want to use your existing hi-fi system or active speakers, check that the turntable’s phono or line output matches the available inputs. Passive speakers also need a stereo amplifier, as Audio-Technica explains.

For listening while you work

If you want to put on an LP while you work, fully automatic operation can make things easier. Check whether the model both starts playback and returns the tonearm at the end. Audio-Technica and Sony describe these features on their respective models.

For limited space

If the turntable will sit on a shelf or desk, check how much space it needs with the lid open. Dual lists a height of 400 mm for the CS 518 with its lid open. Audio-Technica recommends placing the AT-LP70XBT on a level surface, away from speakers that could cause vibration.

What should you look for when choosing?

Start by checking how the signal will reach your speakers or headphones. Then consider the level of automation you want, the space available and the options for replacing the stylus and maintaining the turntable.

What matters to you What to check before buying Who is this particularly relevant to?
Connecting to your existing audio setup Check the phono and line outputs, the inputs on your existing equipment and whether passive speakers will need an amplifier. If I want to use my existing speakers or hi-fi system, I want to know before buying which connections and components will work together. Around 30% of consumers focus on connecting the turntable to their existing audio setup.
Easy operation while working Know the difference between full automation, which starts playback and returns the tonearm, and an auto-lift, which only lifts the tonearm at the end of the record. If I want to keep operating the turntable to a minimum while I work, I check what it does at the start and end of a record. Around 30% of consumers prioritise easy operation while working.
Space and vibration Measure the space needed with the lid open and allow for a level surface, ideally away from speaker vibrations. If my desk or shelf has limited space, I want to make sure the turntable has enough clearance while in use. Around 20% of consumers pay particular attention to space and a stable position.
Stylus replacement and future upgrades Check which replacement stylus is compatible and whether you can replace just the stylus or the entire cartridge as well. If I want to use the turntable for a long time or upgrade it later, I want to know which parts can actually be replaced. Around 20% of consumers prioritise stylus replacement and upgrade options.

Common selection mistakes

  • Treating phono and line as interchangeable connections

    A phono signal connected to a line input may be too quiet; applying phono equalisation twice can distort the sound.

    Before buying, map the signal path from the turntable to the speakers and set the phono or line output to suit the connected equipment.

  • Confusing auto-lift with full automation

    According to the manufacturer, the Technics SL-1500C’s auto-lift raises the tonearm at the end of a record. It does not automatically start playback or return the tonearm.

    Check the start, end-of-record behaviour and tonearm return separately, rather than relying on the word ‘automatic’ alone.

  • Allowing space only for the closed lid

    An open lid needs extra room. An unsuitable surface or nearby speakers can also make it harder to position the turntable properly.

    Measure the space with the turntable ready for use and follow the manufacturer’s advice on choosing a level, low-vibration surface.

  • Assuming similarly named model generations are the same

    Pro-Ject’s current model range lists the A1.2 rather than the A1, and the Debut EVO 2 rather than the Debut Carbon EVO. Similar model names do not guarantee identical features.

    Before ordering, check the full model name and the details for the exact version on offer.

Key brands and model ranges

Audio-Technica

The AT-LP70XBT combines fully automatic operation with Bluetooth and a switchable phono preamp. It could suit you if you want to choose between wireless and analogue connections, depending on your existing audio setup.

  • Audio-Technica lists VM95-series replacement styli for the AT-LP70XBT.
  • The cartridge is integrated into the tonearm, so replacing the stylus is not the same as changing the entire cartridge.

Sony

According to Sony Germany’s technical specifications, the PS-LX310BT offers fully automatic operation, Bluetooth and an analogue output.

  • The manufacturer’s specifications list automatic start and return, as well as phono and line outputs.
  • It has no USB, and the cartridge head is not replaceable according to the manufacturer. These details apply to the PS-LX310BT, not all Sony turntables.

Dual

The CS 518 is aimed at listeners considering a manual model with a switchable MM phono preamp and detachable headshell.

  • Dual lists adjustable anti-skating and dimensions with the lid open.
  • According to the manufacturer, the CS 518 has neither automatic start nor stop.

Technics

The SL-1500C is a direct-drive model with a built-in phono equaliser and a supplied cartridge.

  • Technics lists an automatic tonearm lift at the end of a record.
  • Auto-lift does not mean the turntable also starts automatically and returns the tonearm.

Pro-Ject

The Automat A1 is a fully automatic model with a switchable phono preamp. The Debut Carbon EVO is a different model with manual operation.

  • The A1 data sheet lists fully automatic operation and a built-in, switchable phono preamp.
  • Pro-Ject’s current model range lists the A1.2 and Debut EVO 2. When choosing, don’t confuse these models with the A1 or Debut Carbon EVO.

Joybuy products for different listening setups

These Joybuy products range from turntables with automatic operation to all-in-one systems with built-in speakers and other playback options. Check which connections and features you actually need.

SHARP RP-TT95 turntable with Bluetooth and USB-C recording

SHARP RP-TT95 turntable

Fully automatic operation could suit you if you want to keep operating the turntable to a minimum while listening in your home office.

Bluetooth 5.4, USB-C recording function, AT-3600L cartridge and dust cover.

Joybuy
Karcher KA 320 compact system with turntable

Karcher KA 320 compact system

This system could be worth considering if you want to play other formats as well as LPs and use the speakers included in the system.

Turntable, CD and cassette players, radio, USB, SD card reader and MP3 encoding. Line-out and headphone socket are also listed.

Joybuy
Karcher 6608D jukebox with turntable and built-in speakers

Karcher 6608D jukebox

The built-in stereo speakers let you listen without separate speakers.

Turntable for 33, 45 and 78 rpm records, CD, DAB+/FM radio and MP3 playback via USB or SD card. Bluetooth audio streaming is also listed.

Joybuy
Karcher KA 8050 retro turntable with built-in stereo speakers

Karcher KA 8050 retro turntable

The built-in stereo speakers let you listen without a separate speaker system.

33/45 rpm playback, auto-stop function, headphone socket and RCA line-out.

Joybuy
XJ-HOME XJ-H01 all-in-one turntable with built-in speakers

XJ-HOME XJ-H01 all-in-one turntable

The built-in speakers are an option if you want to listen to LPs without a separate speaker system.

Four built-in speakers, AT-3600L-MM cartridge, belt drive and 33 1/3 and 45 rpm playback. Phono/line RCA outputs and an AUX input are also listed.

Joybuy

Frequently asked questions

Can I connect a turntable directly to my speakers?

You can connect it to compatible active speakers with a line input, provided the turntable supplies a suitable line-level signal. Passive speakers also need a power amplifier. A phono signal requires a suitable phono preamp; avoid applying phono equalisation twice.

Where should I put my turntable in the home office?

Choose a level surface, ideally away from speakers that cause vibration. Allow room for the lid to open, too: Dual lists a height of 400 mm for the CS 518 with its lid open. Follow the setup guidance provided by the manufacturer of your model.

Is an automatic tonearm lift the same as fully automatic operation?

No. An auto-lift can raise the tonearm at the end of a record without automatically starting the turntable or returning the tonearm. Check the start and end functions of the specific model separately.

What should I bear in mind when setting it up and replacing the stylus?

Follow the instructions for your specific model and check which replacement styli are compatible before buying. Audio-Technica lists VM95-series styli for the AT-LP70XBT; however, the cartridge is integrated into the tonearm, so replacing the stylus is not the same as changing the entire cartridge.