Who this microphone comparison is for

Solo speakers in a noisy room

If you’re recording the intro on your own, consider the noise and room reflections at your actual speaking position. Getting the microphone close to you and positioned correctly can make a difference.

Solo speakers with a simple computer setup

If you want to record on your computer without a separate audio interface, check for a suitable USB connection and the option to monitor your voice during a test recording.

Interviewers planning to have a guest

If you’ll record an intro on your own first, but later want to edit both voices separately, look for additional inputs and a suitable multitrack signal chain before you buy.

What to look for when choosing

Dynamic USB microphone

A good fit if: you record on your own at a computer, can speak close to the microphone and your room has noticeable background noise or reflections.

The trade-off: Correct positioning close to the microphone is essential; its design won’t automatically make a room quiet.

USB condenser microphone

A good fit if: your recording space is quiet and you’re looking for a microphone that plugs straight into your computer.

The trade-off: Check how clearly it picks up echo and background noise in your space.

XLR or USB/XLR setup

A good fit if: you already have a suitable interface, plan to use separate microphones later or want the choice of USB and XLR.

The trade-off: XLR needs a suitable signal chain. An extra input is a model-specific feature, not a standard feature of USB/XLR microphones.

Concern What to look for when buying Who it matters to
Clear voice recordings in your room Check the microphone type, polar pattern, speaking side and achievable speaking position; listen to a test recording made in your actual recording space. If I speak in a noisy room, I want to assess background noise and room reflections where I’ll be sitting. Around 37 % of consumers say room noise is their main concern.
Easy connection and monitoring Check the USB connection, device compatibility, headphone monitoring and what’s included with the specific model. When I record an intro on my own at my computer, an easy signal chain and the option to listen back to a test recording matter to me. Around 27 % of consumers prioritise a straightforward computer connection.
A quiet, fixed speaking position Consider the setup, speaking side and a suitable desk stand or boom arm; test the recording in your own space. If my recording space is quiet and permanently set up, I want to find the right microphone position without having to keep changing the setup. Around 18 % of consumers prioritise a quiet, fixed speaking position.
Recording with a guest later Decide whether you want to record two voices separately; check the inputs, track mode, interface and microphones individually. If I want to record a guest as well as my intro later, I need a signal chain that allows me to record separate voices. Around 18 % of consumers prioritise being able to expand their setup later.

Avoiding common buying mistakes

  • Assuming a dynamic microphone automatically removes background noise

    How well it works in a noisy room also depends on whether you can position the microphone correctly and speak close to it. Its design alone won’t eliminate background noise.

    Check whether the required position works with your script and, if relevant, your camera framing. Then listen to a test recording in the room.

  • Planning to use one microphone for two separate tracks

    You may need an additional microphone and suitable inputs. A second input and multitrack mode are explicitly model-specific features of products such as the Shure MV7i.

    If you want to edit the voices separately, choose a signal chain that explicitly supports this type of recording.

    Recording two separate voices may mean adding another microphone and suitable inputs to your setup.

  • Considering only the microphone when choosing XLR

    An XLR microphone needs a suitable signal chain. For voiceover work with the SM7B, Shure recommends at least 60 dB of preamp gain. This model-specific guidance doesn’t apply to all microphones.

    Before you buy, check the specific model, interface or preamp, and what’s included.

    Depending on your setup, you may need a suitable interface or preamp, as well as extra accessories.

  • Assuming similarly named model generations are the same

    The Wave:3 MK.2 is a distinct model variant. Don’t assume that its system requirements and sample rate also apply to the older Wave:3 without checking.

    Compare the full model name, technical specifications and what’s included with the exact variant.

Key brands at a glance

Audio-Technica

For recording an intro in your home studio, the dynamic ATR2100x-USB and USB condenser AT2020USB-X offer two different approaches.

  • Audio-Technica lists a headphone socket and included USB and XLR cables for the ATR2100x-USB.
  • According to Audio-Technica, the AT2020USB-X has a mix control that lets you blend the microphone signal with your computer audio.
  • The ATR2100x-USB and AT2020USB-X differ in design and use. How well the condenser microphone works also depends on your recording space.

Shure

The models mentioned range from USB-C/XLR voice microphones to the MV7i, which has an additional microphone input.

  • Shure lists a headphone socket and digital processing features for the MV7+. This doesn’t independently establish how well they’ll work in your particular room.
  • For the MV7i, Shure lists an additional microphone input and a mode for separate mono tracks.
  • For voiceover work with the SM7B, Shure recommends at least 60 dB of preamp gain. This recommendation applies to this model and isn’t a general requirement for Shure microphones.

RØDE

According to RØDE, the PodMic USB offers USB-C and XLR signal paths for voice recording.

  • RØDE lists a headphone output for direct monitoring and an integrated mount.
  • XLR operation still requires a suitable connection path. Manufacturer claims alone don’t establish how the microphone will sound for you.

Elgato

The Wave:3 MK.2 is a USB condenser microphone with controls and software features for recording on a computer.

  • Elgato lists DSP features, a headphone socket and a desk stand for the MK.2.
  • Elgato specifies a 48 kHz sample rate and specific system requirements for the Wave:3 MK.2. Don’t assume these are the same as for the older Wave:3.

HyperX

The QuadCast S is a USB condenser option if you’re considering different setups as well as recording solo speech.

  • HyperX lists four selectable polar patterns, a headphone socket and a shock mount for the QuadCast S.
  • A different polar pattern is no substitute for a suitable recording space or separate microphones if you want to edit interview voices separately. Information about the QuadCast S doesn’t automatically apply to other QuadCast models.

Microphones for recording in your home studio

This Joybuy selection includes dynamic USB/XLR models for recording speech on a computer, as well as a USB condenser microphone for solo recordings.

FIFINE K688CTW dynamic USB/XLR microphone with boom arm

FIFINE K688CTW with boom arm

A possible choice for recording solo at your PC if you want flexibility when positioning the microphone.

Dynamic USB/XLR microphone with mute, volume control and headphone socket. According to the product information, an XLR cable isn’t included.

View at Joybuy
FIFINE AM8 dynamic USB/XLR microphone with desk stand

FIFINE AM8 USB/XLR microphone

For recording solo on your computer if you want to monitor through the headphone socket during a test recording.

Dynamic microphone with USB-C and XLR connections, a headphone socket and volume control; a desk stand is mentioned in the product name. According to the product information, an XLR cable and boom arm aren’t included.

View at Joybuy
FIFINE K688CT dynamic USB/XLR microphone with boom arm

FIFINE K688CT microphone kit

For recording solo on a computer with the microphone close to you, if you want a boom arm as part of your setup.

Dynamic USB/XLR microphone with boom arm, headphone socket and mute. The product description recommends a speaking distance of 2 to 6 inches; it also states that the microphone controls work in USB mode. An XLR cable isn’t included.

View at Joybuy
Dynamic USB-C/XLR microphone set with RGB and desk stand

Dynamic USB-C/XLR microphone set

An option for recording speech on a computer if you’re also planning to use an XLR signal chain.

The product description lists USB-C and XLR, a headphone socket, mute and a desk stand. It also lists gain control and echo effects.

View at Joybuy
JBL Quantum Stream Studio USB-C condenser microphone

JBL Quantum Stream Studio

For recording a solo intro on your computer if you want to choose between different polar patterns.

USB-C condenser microphone with four selectable polar patterns; the product description lists a cardioid pattern for solo recordings and direct monitoring.

View at Joybuy

Frequently asked questions

Do I need an audio interface to record an intro?

A USB microphone doesn’t need a separate audio interface to record on a compatible computer. For XLR, you’ll need a suitable microphone input and signal chain. A microphone with both outputs gives you the choice.

How can I check whether a microphone suits my room?

Listen to a test recording made in your actual recording space and check for room reflections and background noise. With a dynamic microphone, you’ll need to be able to use the correct close-up speaking position in practice. Assess a USB condenser microphone in a quiet space.

What do I need to record a guest on a separate track later?

You’ll need a signal chain with suitable inputs and a compatible track mode. Depending on your setup, you may also need another microphone and extra accessories. A single USB/XLR microphone doesn’t automatically let you record two separate voices.

What extra equipment might I need for an XLR microphone?

Make sure you have a suitable microphone input and signal chain. Depending on the model and setup, you may also need an interface, preamp, cable or mount. Check what’s included with the specific model before choosing your signal chain.

Can I record an interview guest’s voice in Germany without asking?

Recording someone else isn’t the same as recording your own intro. Section 201 of the German Criminal Code (StGB) covers the unauthorised recording of another person’s privately spoken words. So, before the conversation, clarify that they consent to being recorded and how the recording will be used. The German Data Protection Conference’s statement that consent is also required from the other person in the conversation relates to telephone recordings; it doesn’t apply across the board to every recording situation.