Who are these solutions for?

Stereo mixing at your home studio desk

If you want to adjust your monitoring volume, switch to mono and move directly between pairs of stereo speakers, first check what your audio interface can do. Mackie and Palmer describe stereo switching options, while Bonedo notes that audio interfaces can take on some of a mixer’s functions in certain home recording setups.

Mixing with surround monitoring

If you need to control individual discrete speaker channels in your theatre soundtrack, your monitoring format and interface outputs are key. SPL describes the SMC 7.1 as offering multichannel control with 7.1 input sources.

Teams using headphone cues

If several people need to listen at the same time, check whether you need separate headphone paths and talkback. Audient and PreSonus both document multiple headphone outputs on their respective monitor controllers.

What should you look for when buying?

First decide on your monitoring format. Then you can plan the sources, speaker pairs and headphone paths to suit your interface.

Consideration What to check before buying Who it matters most to
Stereo monitoring and switching speakers Count stereo sources and speaker pairs separately. Mackie lists two sources and two monitor pairs for the Big Knob Passive; Palmer lists two stereo outputs for the MONICON L G2. If I mainly mix in stereo, I want to adjust the volume, switch to mono and move between speaker pairs directly. Around 36% of consumers are likely to prioritise this kind of stereo setup.
Discrete surround channels Check each required channel across your interface, controller and speakers. SPL lists two 7.1 and two stereo input sources for the SMC 7.1. If my theatre mix requires discrete surround channels, I need to be able to control each speaker path individually. Around 29% of consumers are likely to prioritise discrete surround.
Headphone cues and communication Check the number of headphone outputs, their level controls and signal routing, as well as whether you need a talkback path. Audient and PreSonus each list four headphone outputs; PreSonus describes individual level control. If several people need to listen at the same time, I need suitable headphone paths and possibly talkback. Around 21% of consumers are likely to prioritise headphone paths for a team.
Integration with your existing setup Make a note of your interface outputs, connections, power requirements and available space. RME says the ARC USB is a remote control for TotalMix FX and requires a compatible RME interface. If my interface already handles monitoring control, I want to avoid adding unnecessary equipment. Around 14% of consumers are likely to prioritise integration with their existing setup.

Common pitfalls

  • Confusing multiple stereo speaker pairs with discrete surround

    Multiple stereo outputs don’t automatically provide discrete surround control. Audient and PreSonus describe multiple stereo speaker paths; SPL specifically lists multichannel inputs for the SMC 7.1.

    Decide on your monitoring format and required channel layout before choosing a model. Check the signal paths from your interface through the controller to your speakers.

    Surround may require a differently configured controller and additional compatible signal paths.

  • Assuming ‘2×2’ means two headphone outputs

    For the Big Knob Passive, Mackie uses this to describe two sources and two monitor pairs. The model overview doesn’t list a headphone output for this version.

    Check sources, speaker outputs and headphone connections separately.

    If your interface doesn’t provide a suitable headphone path, you may need an additional solution.

  • Overlooking extra features that need power

    Palmer says that Bluetooth, the headphone amplifier and output three on the MONICON L G2 require power.

    Check the specific model to see which features you plan to use need a power supply.

    If needed, allow space for the power supply and extra cabling.

Brands to consider

Palmer

Palmer says the MONICON L G2 is designed for multiple stereo sources, two stereo outputs and an independently controlled headphone path.

  • Palmer lists mono, dim, mute and an additional mono output.
  • Bluetooth, the headphone amplifier and output three need power; the paths described don’t provide discrete surround control.

Mackie

The Big Knob Passive is designed as a simple passive stereo switcher, with two sources and two pairs of speakers.

  • Mackie documents a passive signal path, as well as mono, mute and dim.
  • The model overview doesn’t list a headphone output for the Passive version. Details for other Big Knob versions don’t necessarily apply to this model.

SPL

The SMC 7.1 is aimed at setups that need discrete analogue surround monitoring.

  • SPL lists two 7.1 and two stereo input sources, as well as channel-specific solo functions.
  • You’ll need a suitably configured multichannel signal chain.

Audient

Audient describes the Nero as offering multiple stereo monitoring and headphone paths for a shared workspace.

  • Audient lists three stereo speaker outputs, an assignable sub output, four headphone outputs and talkback.
  • The manufacturer’s specifications don’t list discrete 7.1 control for the Nero.

PreSonus

PreSonus says the Monitor Station V2 is designed for multiple stereo sources, speaker pairs and separate headphone cues.

  • PreSonus lists four headphone outputs with individual level controls and an integrated talkback path.
  • The speaker outputs described are stereo pairs, not designated discrete surround control.

RME

The ARC USB can be an alternative to adding a separate controller if you use a compatible RME interface with TotalMix FX.

  • RME describes the ARC USB as a remote control for TotalMix FX.
  • Without a compatible interface, it isn’t a standalone monitoring switcher.

Selected products at Joybuy

Related products coming soon.

Frequently asked questions

Can I automatically monitor discrete surround using two or three stereo outputs?

No. Multiple stereo outputs alone don’t provide discrete surround control. Compare the individual speaker channels you need with the documented multichannel routing: SPL specifically lists 7.1 input sources for the SMC 7.1, while the models described here from Audient and PreSonus offer multiple stereo speaker paths.

How do I connect a monitor controller to my existing setup?

First, map your interface outputs to the controller inputs, then route them to the speaker paths you need. Check the connections and channel layout for each signal path; according to RME, the ARC USB can only be used with an RME interface that supports TotalMix FX.

What should I bear in mind when using and maintaining it?

Keep a mute control within easy reach if you need one for your work. Mackie’s Big Knob Passive manual recommends cleaning the unit with a dry cloth only.

What costs and consumer rights should I consider when buying in Germany?

Check whether you’ll need extra cables or a power supply for the setup you want. Verbraucherzentrale distinguishes statutory consumer rights from a voluntary guarantee and says online purchases generally come with a 14-day right to cancel. The conditions and when the period starts depend on the applicable legal rules.

What rules apply to labelling and disposing of electrical equipment?

According to the European Commission, CE marking is required for products covered by relevant harmonised EU legislation that requires it; it isn’t a general, independent quality mark. Check the labelling and product documentation for the specific device. The German Environment Agency says that, under certain conditions, waste electrical equipment can be returned free of charge to municipal collection points and certain take-back points.