Who are in-ear headphones suitable for?

Anyone looking to assess mix adjustments

When checking EQ, level or effect changes, familiar reference tracks can help, along with a follow-up check on another playback system. iZotope discusses comparing headphones with studio monitors, while Etymotic describes the ER2SE’s tuning as flat.

Anyone who wants to listen quietly in a shared room

A comfortable, well-fitting pair can help make room noise less distracting. Shure points out that a poor seal can also affect the bass response of its earphones.

Anyone who listens for longer periods

For longer sessions, the right ear tips and a comfortable fit matter. Replaceable cables or spare parts may also be useful as components wear out. These options vary by model and connector.

What should you look for when buying?

Consideration What to check when buying Who it matters most to
Assessing sound Tuning and the exact model variant; check mix decisions on a second playback system as well. If I want to assess small EQ or level changes, I need a consistent tuning and will check important decisions on another system later. Around 33% of consumers say assessing sound is their top priority.
Isolation and fit Ear tip sizes and materials; don’t assume attenuation figures will reflect your personal experience. In a shared room, I want to be less distracted by background noise. I’ll first find a good seal rather than try to compensate for a poor fit with EQ. Around 27% of consumers say isolation is their main concern.
Comfort and volume Fit and feel; take breaks during longer sessions and keep the volume low. For longer listening sessions, I need a comfortable fit and want to listen at a sensible level rather than keep wearing uncomfortable ear tips. Around 20% of consumers put comfort first.
Connectors and spare parts Check the device output, the supplied plug or adapter, and the connector used by any replacement cable. If I might replace the cable later, I want to know whether the connector will work with my device and which replacement cable is actually compatible. Around 20% of consumers put connectivity and repairability first.

Avoiding buying pitfalls

  • Assuming attenuation figures guarantee the same result for your ears

    The actual seal depends on the fit and ear tips. What’s more, manufacturer figures for different models aren’t directly comparable unless they were measured under the same conditions.

    Before buying, check the sizes and materials available, and assess the bass balance only once you have a stable fit.

    Depending on the fit, you may need different or additional ear tips.

  • Assuming a tuning described as neutral gives you the full picture of a mix

    In-ear headphones may reproduce frequencies and spatial effects differently from other systems. A manufacturer’s description of the tuning doesn’t prove that the mix will sound the same on them.

    Use familiar reference tracks and check important decisions on another playback system as well.

  • Confusing a detachable cable with universal compatibility

    Connectors vary by model: Audio-Technica specifies A2DC for the ATH-E70, while Shure specifies MMCX for the SE215.

    Check the connector on the earphones separately from your device’s output, and verify the plug type of any replacement cable or adapter.

    To replace the cable, you’ll need one that matches the connector on your specific model.

  • Assuming you can always return them after opening

    Whether the statutory hygiene exception applies depends on the specific circumstances. Section 312g(2)(3) of the German Civil Code (BGB) covers sealed goods that are unsuitable for return for reasons of health protection or hygiene if their seal has been removed after delivery.

    Read the returns information before buying and check the specific circumstances. A retailer’s voluntary returns policy is separate from the statutory right of withdrawal.

Relevant brands to consider

Etymotic

The ER2SE is described as a Studio Edition model with flat tuning; the ER2XR is a separate alternative with boosted bass.

  • Etymotic states that the ER2SE offers 35–42 dB of passive attenuation and has a user-replaceable cable.
  • The attenuation figure is supplied by the manufacturer. Fit, seal and comfort can vary from person to person.

Audio-Technica

The ATH-E70 is marketed by the manufacturer for stage monitoring and studio mixing.

  • Audio-Technica lists three balanced-armature drivers, several ear tip sizes, a detachable cable and an adapter.
  • Claims about sound precision come from the manufacturer and aren’t an independent comparison. The replacement cable uses an A2DC connector.

Shure

The SE215 is a wired universal in-ear monitor supplied with a fit kit and passive isolation.

  • Shure lists a replaceable MMCX cable and a reduction in ambient noise of up to 37 dB.
  • Shure also describes the sound as having deep bass. The isolation figure doesn’t prove that it offers neutral mix playback.

Sennheiser

The IE 100 PRO is marketed for monitoring and studio use.

  • Sennheiser’s data sheet lists an impedance of 20 Ω for the IE 100 PRO.
  • Sennheiser lists noise attenuation of less than 26 dB. These specifications don’t prove a better fit or an isolation figure comparable with those of other models.

beyerdynamic

The DT 30 IE is a wired in-ear monitor for live monitoring.

  • beyerdynamic lists replaceable cables and ear pads, as well as passive isolation of up to 39 dB.
  • Its focus on live use doesn’t independently prove that the model is suitable as your sole mix reference.

Joybuy products

The selection ranges from wired USB-C in-ear headphones to true wireless models. If you’re making mix adjustments, check that the connector and playback route suit your setup.

‘Calm’ in-ear headphones with USB-C, microphone and cable strain relief

‘Calm’ in-ear headphones with USB-C, microphone and cable strain relief

A wired option if your playback device supports USB-C audio.

The product name specifies a 1.2 m cable and an integrated microphone.

View on Joybuy
Bowers & Wilkins Pi6 true wireless in-ear headphones

Bowers & Wilkins Pi6 True Wireless

Could be a suitable choice for wireless listening in a shared room. For mix decisions, check the playback route on another system as well.

The product name specifies active noise cancellation, Bluetooth 5.4 with Multipoint and up to 8 hours of battery life.

The product name also lists 12 mm bio-cellulose drivers and 24-bit wireless with aptX Adaptive.

View on Joybuy
Intenso 3720500 Buds Pro T500HAE Black

Intenso 3720500 Buds Pro T500HAE Black

A wireless option if you want to switch between music and transparency modes while listening.

The product description specifies active noise cancellation and Bluetooth 5.3.

Playback time is listed as up to 9 hours with the earbuds, and up to 35 hours with the charging case.

View on Joybuy
QCY Crossky C50-White true wireless earbuds

QCY Crossky C50-White

As true wireless earbuds, these are an option if you want to use a Bluetooth connection for music playback.

The product description specifies touch controls.

View on Joybuy
Soundcore Anker R50I B2B White in-ear headphones

Soundcore Anker R50I B2B White

Wireless in-ear headphones for Bluetooth playback. Check whether this connection suits your workflow for making mix decisions.

View on Joybuy

Frequently asked questions

Are in-ear headphones enough to make a final judgement on a mix adjustment?

No. You can use them to compare changes, but you should also check the bass, panning and overall balance on another playback system; a mix made on headphones may sound different there. iZotope discusses comparing headphones with studio monitors.

What can I do if the bass sounds weak after I put them in?

First, check the seal and try the supplied ear tip sizes. Shure points out that a poor fit can affect the bass response of its earphones, so don’t rush to adjust the mix.

How can I listen at a sensible level during longer sessions?

Keep the volume low and take breaks. The World Health Organization gives 80 dB for up to 40 hours a week as a guideline, and four hours a week at 90 dB. You can’t read this directly from the position of a volume control.

What should I look for in a replacement cable?

Check the connector on your in-ear model and compare it with the replacement cable. Audio-Technica specifies A2DC for the ATH-E70, while Shure specifies MMCX for the SE215, so a detachable cable isn’t automatically compatible with other models.

Are opened in-ear headphones always excluded from the right of withdrawal in Germany?

No. The product category alone doesn’t mean that returns are automatically excluded. Section 312g(2)(3) of the German Civil Code (BGB) sets out an exception for sealed goods that are unsuitable for return for reasons of health protection or hygiene if their seal has been removed after delivery. Whether these conditions are met for a specific offer must be assessed on a case-by-case basis.