Who these in-ear headphones might suit

People mixing in a noisy home

If conversations or other household sounds are drowning out quiet details in your mix, a good seal in your ears and a comfortable listening volume are important things to consider. The WHO recommends well-fitting headphones rather than turning the volume up to overpower distracting noise.

Detail-focused listeners

If you’re judging small EQ, level or balance changes, take the sound signature of the specific headphones into account and check your mix decisions on another playback system. iZotope notes that headphones and speakers can reproduce sound differently.

People who spend long sessions at their desk

For longer sessions, a comfortable eartip and a connector that suits your audio output matter. Check which eartips or replacement cables are available for the model you’re considering, too.

What to look for when choosing

Start by checking the fit and whether the connection works with your setup. Then consider whether the sound signature suits your mix checks, and use a second playback system for important decisions.

What matters What to check before buying Who is this important to?
Isolation at low volume Eartip sizes and materials; a comfortable, secure fit in both ears. If I want to block out household noise and hear details in my mix without constantly turning the volume up, fit is crucial. Around 36% of consumers prioritise isolation.
Sound signature The tuning of the specific model; cross-checking on another playback system. If I’m judging small EQ and level changes, I don’t want to mistake a possible colouration from the headphones for a problem with the mix. Around 29% of consumers prioritise assessing sound.
Fit during long listening sessions Supplied eartip sizes and materials; comfort over your planned listening time. If I’m listening at my desk for a long time, I need eartips that stay comfortable and secure throughout the session. Around 21% of consumers put long-wear fit first.
Connections and replacement parts A plug that matches your audio output; the connector on the headphones and compatible replacement parts. If I want to change the cable or connect the headphones directly to my interface, the connectors need to match. Around 14% of consumers prioritise connectivity and maintenance.

Common selection mistakes

  • Treating isolation figures from different manufacturers as a definitive ranking

    Etymotic, Shure and Sennheiser publish figures for specific models. Without identical measurement conditions and a good fit, these figures don’t give you a reliable ranking for your home.

    Compare eartips and fit, and consider decibel figures in the context of the model and the manufacturer’s test conditions.

  • Assuming strong bass means you can judge bass accurately

    Shure describes the SE215 as having strong bass, as does Audio-Technica for the ATH-E40. This kind of tuning can influence your mix decisions.

    Check important bass decisions against familiar reference tracks and on another playback system, too.

  • Assuming a detachable cable will fit any headphones

    Shure specifies an MMCX connector for the SE215, while Audio-Technica lists A2DC connectors on the ATH-E40 earpieces. These are different connections.

    Check the connector on the headphones and the output on your playback device before choosing a replacement cable or adapter.

  • Assuming you can always return headphones after trying them for fit

    Under § 312g BGB, exceptions to the right of withdrawal apply in certain circumstances. One example is sealed goods that are unsuitable for return for reasons of health protection or hygiene once the seal has been removed. You can’t tell whether this applies to a specific product just from its being an ‘in-ear’ design. Return postage may also apply, depending on the seller and the terms of the contract.

    Read the withdrawal information before opening the product and check whether the specific item falls within one of the stated exceptions.

Brands to consider

Etymotic

The ER2SE is a wired option for anyone looking to try a sound signature that the manufacturer describes as flat, along with passive isolation.

  • Etymotic quotes passive attenuation of 35–42 dB and a replaceable cable for the ER2SE.
  • These are manufacturer figures; they don’t prove the headphones will fit your ears or sound right to you. According to Etymotic, the ER2XR has a different bass tuning.

Shure

The SE215 is worth considering if you want to compare different eartip materials and have a detachable cable.

  • Shure lists foam and silicone eartips, an MMCX connection and up to 37 dB of isolation for the SE215.
  • Shure also describes the sound as having strong bass. The isolation figure alone therefore doesn’t prove that the sound is neutral or the fit is right for you.

Sennheiser

The wired IE 100 PRO is another option for comparing silicone and foam eartips.

  • Sennheiser lists replaceable eartips and attenuation of less than 26 dB for the IE 100 PRO.
  • Without the same measurement conditions, this attenuation figure can’t be directly compared with figures from other manufacturers. Also check whether you’re looking at the wired model or a wireless bundle.

Audio-Technica

The wired ATH-E40 offers another fit option, with a choice of silicone eartip sizes.

  • Audio-Technica lists four silicone sizes (XS, S, M and L), a detachable 1.6 m cable with an A2DC connector on the earpieces, a 3.5 mm plug and a supplied 6.3 mm adapter.
  • Audio-Technica describes the sound as having strong bass. No directly comparable attenuation figure in decibels is available here for the ATH-E40.

Related products at Joybuy

The Joybuy products below include in-ear and earbud options for different listening situations. Before using a specific model to check a mix, check its sound signature and whether the connection suits your setup; the product details don’t prove that its tuning is neutral.

Noble in-ear headphones with 3.5 mm jack, white

Noble in-ear headphones with 3.5 mm jack, white

If your audio output has a 3.5 mm socket, the listed connection will suit your setup.

3.5 mm jack; 1.2 m cable; built-in remote.

View at Joybuy
Redmi Buds 6 Play

Redmi Buds 6 Play

If you want to listen wirelessly, check that Bluetooth works with your playback device and fits your workflow.

10 mm dynamic drivers; four EQ settings; Bluetooth 5.4.

View at Joybuy
Intenso 3720300 Buds T300A, black

Intenso 3720300 Buds T300A, black

If you’re considering an option with active noise cancellation, check how playback changes when the feature is switched on while listening to your mixes.

View at Joybuy
vivo Buds Pro, Basalt Black

vivo Buds Pro, Basalt Black

If you use the listed ANC feature while listening, compare playback with the mode switched on and off before using it to make mix decisions.

11 mm dynamic drivers; Bluetooth 6.1; S, M and L eartips.

View at Joybuy
QCY Crossky C50, white

QCY Crossky C50, white

If you use these earbuds as an additional listening reference, check important sound and balance decisions on another playback system as well.

View at Joybuy

Frequently asked questions

Can I make a final judgement on my whole mix using well-isolating in-ear headphones?

No. You should also check important decisions on another playback system. Headphones can reproduce bass, stereo and spatial relationships differently from speakers.

How do I connect wired in-ear headphones to my audio interface?

Compare the output on your specific interface with the model’s plug and adapter. Audio-Technica lists a 3.5 mm plug and a 6.3 mm adapter for the ATH-E40; Shure lists a 3.5 mm cable for the SE215.

What can I do if one earbud starts sounding quieter?

First check the fit and look for any visible dirt, then follow the instructions for your model. Shure recommends pointing the sound outlet downwards when cleaning its earphones and avoiding pushing the cleaning tool into the filter.

Should I turn up the volume to drown out household noise?

No. The WHO recommends well-fitting headphones to reduce the need to turn up the volume in a noisy environment.

What are the rules in Germany for withdrawing from an online purchase of in-ear headphones?

Distance contracts with a business seller generally come with a right of withdrawal, but § 312g BGB provides for exceptions in certain circumstances. These include certain sealed goods that are unsuitable for return for reasons of health protection or hygiene if their seal has been removed after delivery. You can’t tell whether these conditions apply to a specific product just from its being an ‘in-ear’ design. Check the type of product and the withdrawal information.

What should I look for in a wireless or Bluetooth bundle?

Check the exact variant, along with the labelling and safety information for the specific product. For products within its remit, the Bundesnetzagentur checks matters including CE marking and whether the product can be identified; this doesn’t verify any individual listing.