If you only want to hear the backing track while practising, a wired in-ear earphone that’s compatible with your audio source is a good place to start. If you also want to hear your own voice in your ears, you’ll need a suitable microphone and monitor signal path too. Wireless can be useful if you really need to move around; just make sure you plan for power and check the conditions that apply to the specific device version.
Who practises with in-ears?
Singers who want to hear their own voice
You want to hear both your voice and the backing track as you sing along. For that, your microphone, audio source and monitor path need to work together. Steinberg describes Direct Monitoring as one option when used with compatible audio hardware.
Singers who want to focus on the backing track
You mainly want to hear the backing track while singing along, seated or standing. Shure and Sennheiser offer different ear tips with their respective in-ear earphones. The important things are a secure fit and a connection that’s compatible with your playback source.
Mobile or off-grid singers
You need freedom to move around or are planning a practice session without access to a mains socket. Behringer specifies two AAA batteries for the P2. Xvive describes its U4 as a system with a transmitter and belt-pack receiver, both of which need to be compatible with the wireless connection you plan to use.
Which buying criteria matter when practising?
First, decide whether you want to hear only the backing track or your own voice as well. Then you can check the connections, ear tips, power requirements and whether you really need freedom to move around.
| What you need |
What to check before buying |
Who is this important to? |
| Hearing your own voice and the backing track |
Check that there’s a microphone input and monitor output, and that the source can output both signals together. |
If I want to hear my voice alongside the backing track, the microphone and playback source need to provide a suitable monitor path. Around 33% of consumers prioritise a live monitor path. |
| Playback and ear tips |
Check the fit of the supplied ear tips and make sure the plug is compatible with your playback source. |
If I’m mainly singing along to a recording, I want ear tips that fit well and earphones that are compatible with my connection. Around 27% of consumers prioritise fit and backing-track playback. |
| Power at your practice spot |
Check which components need batteries, rechargeable batteries or mains power, and whether the power supply will last for your planned session. |
If I’m practising without reliable access to a mains socket, I want to plan the power supply for every device I need in advance. Around 20% of consumers prioritise reliable power. |
| Freedom to move around and wireless |
Check whether you really need to move away from the source, whether the input is compatible with the monitor signal, and which wireless conditions apply to the device version. |
If I need to move away from the mixing desk while singing, I need a compatible wireless system and must take its conditions into account. Around 20% of consumers prioritise freedom to move around. |
Common misconceptions about in-ear monitoring
-
Confusing in-ear earphones with a complete vocal monitoring system
Earphones only play the signal they receive. Without a suitable signal path, you may hear the backing track but not your live voice.
Before you buy, map out the route from the recording and microphone to your ears. Direct Monitoring may be an option with compatible audio hardware.
Brands to consider
Shure
The SE215 is a wired in-ear earphone; the PSM 300 is a separate wireless system for a monitor mix that’s already been provided.
- Shure specifies interchangeable MMCX cables and a choice of ear tips for the SE215.
- Shure says the PSM 300 can be used in MixMode or stereo.
- The PSM 300 requires additional system components. The manufacturer’s information does not constitute an independent assessment of sound quality or confirm that every frequency version is suitable for use in Germany.
Sennheiser
The IE 100 PRO is an in-ear earphone for wired monitoring.
- Sennheiser specifies a 10 mm dynamic driver, along with silicone and foam ear tips.
- The earphones alone don’t provide a microphone input or monitor mix. Descriptions of sound and comfort come from the manufacturer.
Behringer
The Powerplay P2 is a battery-powered, wired belt-pack amplifier for an existing monitor signal.
- Behringer specifies a locking XLR/6.3 mm combination input, a mono/stereo switch and a 3.5 mm headphone output.
- The P2 requires two AAA batteries, which are not included. It doesn’t mix a microphone and recording itself.
Fischer Amps
The In Ear Stick is a wired belt-pack amplifier with a mono/stereo switch.
- The manufacturer specifies an XLR/jack input, a 3.5 mm output and an input limiter.
- The device requires an existing monitor signal and doesn’t create a mix from a microphone and recording.
Xvive
The U4 is a wireless monitoring system for an existing mono mix.
- Xvive specifies 2.4 GHz for the system, wireless latency of under 5 ms and five hours of battery life for the transmitter and receiver. These are the manufacturer’s claims.
- The mono mix must be compatible with the input; check the conditions that apply to the specific wireless version before choosing it.
Joybuy products
Related products will be available soon.
Frequently asked questions
Will in-ears automatically let me hear my own voice?
No. To hear your live voice in your ears, you need a suitable microphone and monitor signal path. Direct Monitoring may be an option with compatible audio hardware; simply connecting earphones to the recording source won’t be enough.
Do I need to register to use wireless in-ear monitoring in Germany?
According to the Bundesnetzagentur, no individual registration is required when you stay within the parameters of a relevant general allocation. Vfg. 37/2026 lists in-ear monitoring transmitters as radio microphones; whether a specific device version meets the applicable frequency and operating conditions must be assessed using its wireless specifications.
What should I consider when practising without a mains socket?
Plan for the power supply of every device your setup needs. According to the manufacturer, the Behringer P2 requires two AAA batteries, which aren’t included. With a wireless system, remember to charge both the transmitter and receiver.
What can I check if one earphone sounds quieter?
First check the fit, audio source and ear tips. Shure notes that earwax or dust in the sound outlets can reduce the volume. Clean the earphones according to the instructions for your model rather than simply turning up the volume.