Who might need an audio interface?

Loop editor who isn’t making new recordings

If you’re editing saved files, first check whether your computer’s existing output is suitable for your headphones or speakers. The Audacity Manual explains how to import supported audio files; you don’t need an additional analogue input just to do that.

Headphone-based editor with a small desk

If you listen on headphones at your desk, the right connections and easy-to-reach level controls matter. Remember to allow space for cables plugged into the front and back, too. Focusrite and Yamaha document separate headphone and main volume controls on the models mentioned here.

Producer with a stereo instrument

If you want to record both analogue channels from an instrument at the same time, you’ll need two suitable inputs that can be used simultaneously. Focusrite describes this setup for the Scarlett 2i2 4th Gen, with the left and right outputs of a synthesiser connected to inputs 1 and 2.

What should you look for when buying?

First, check whether your existing playback setup is good enough for saved loops. If you do need extra hardware, choose according to the connections you need, the desk space available and whether you plan to make new recordings.

Consideration What to check when buying Who it matters most to
Do I need extra hardware? Check that you can import files and listen back using your computer, headphones and speakers. If I’m only editing saved loops, I want to check that my existing output is good enough before adding another device to my desk. Around 31 % of shoppers prioritise finding out whether they actually need another device.
Headphones and speakers Check the plug size, whether you need adapters, the output connections, level controls and, if needed, the documented signal routing. With a small desk, I want to connect my headphones and speakers easily and adjust the volume directly. Around 25 % of shoppers prioritise suitable connections and easy-to-reach level controls.
Desk space and cables Measure the available width and depth, and allow extra room for the plugs you’ll actually be using. If desk space is limited, the unit needs to fit with its cables plugged in, and the controls must remain within reach. Around 25 % of shoppers prioritise space requirements.
New stereo recordings List the sources you want to record at the same time, then check the channel layout and the right type of input. If I want to record an analogue stereo instrument later, I need to be able to connect the left and right channels at the same time. Around 19 % of shoppers prioritise being able to make new stereo recordings.

Common buying misconceptions

  • Buying an interface just for saved loops

    Importing existing files is a software task and doesn’t automatically require an extra device.

    First, check that your software can import the files and that your existing playback setup is good enough for listening. Only buy an interface if you’re missing a specific connection or recording feature.

  • Assuming two volume controls mean two independent mixes

    A separate headphone control doesn’t necessarily mean that your headphones and speakers receive different signals. Arturia says the MiniFuse 2 mirrors the monitor output in the headphones; Focusrite also specifies a shared signal for the line and headphone outputs on the Scarlett 2i2 4th Gen.

    If you need different signals at the same time, check specifically whether the outputs can be assigned independently, rather than simply comparing the number of controls.

  • Assuming the number of sockets tells you how many inputs you can use at once

    On the Scarlett 2i2 4th Gen, plugging into the front jack socket disables the XLR input on the same channel, as Focusrite documents.

    Plan your sources channel by channel, and check the manual to see which inputs you can use simultaneously.

  • Measuring only the unit itself

    The unit’s dimensions don’t account for the extra space needed for plugged-in cables and accessible connections. The Scarlett 2i2 4th Gen also has a documented 6.35-mm headphone socket, so you’ll need a suitable adapter if your plug is smaller.

    Measure the available space with your planned cables in place, and check that your devices’ plugs will fit before you buy.

Key brands to consider

Focusrite

The Scarlett Solo 4th Gen is worth considering for a single line-level or instrument source. The Scarlett 2i2 4th Gen may suit you if you need two compatible channels at the same time.

  • Focusrite documents separate volume controls for headphones and the main output on both models.
  • According to Focusrite, the headphone and line outputs on the Scarlett 2i2 4th Gen share the same audio signal. You can’t use a jack connection and XLR on the same input channel at the same time.

Yamaha

The UR22MK3 is a two-channel model that may suit you if you have two compatible analogue sources.

  • Yamaha documents two combo inputs, separate controls for the main output and headphones, and unit dimensions of 158 × 102 mm (width × depth).
  • MIDI connections aren’t listed in Yamaha’s model overview. If you need MIDI sockets, check out another model.

MOTU

The M2 is worth considering for two mic, line-level or instrument sources, as well as MIDI hardware.

  • MOTU documents two combo inputs, MIDI In/Out and USB bus power.
  • According to MOTU, the additional RCA outputs mirror the balanced line outputs, so they aren’t a documented independent monitoring path.

Arturia

The MiniFuse 2 is worth considering for a setup with two inputs, MIDI and a built-in USB hub.

  • Arturia documents MIDI, a USB hub and a dedicated headphone level control.
  • According to Arturia, the headphone output mirrors the monitor output. Arturia also notes that passive USB hubs may not provide enough power.

Steinberg

The UR22C may suit you if you need MIDI or loopback for streaming as well as two inputs.

  • Steinberg describes MIDI and a loopback feature for streaming on the UR22C.
  • That doesn’t mean loopback is necessary just to edit saved loops. The UR22C and Yamaha’s UR22MK3 are different models.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

Can I edit saved loops without an audio interface?

Yes, if your software can import the files and your existing audio output works with your listening setup. The Audacity Manual documents the import of many WAV and AIFF formats, among others. Also check your file format and what your specific software supports.

How do I connect a stereo synthesiser to make new loops?

Connect the left and right analogue outputs to two suitable line inputs that are available at the same time. For the Scarlett 2i2 4th Gen, Focusrite describes using two 6.35-mm TRS cables connected to inputs 1 and 2. Check which connections your synthesiser and interface use.

What should I allow for headphone connections and power?

According to Focusrite, the Scarlett 2i2 4th Gen has a 6.35-mm headphone socket. If your plug is smaller, you’ll need a suitable adapter. Before buying, also check the power requirements of your chosen model against the computer connection available.

Who should I contact if a product is faulty after purchase in Germany?

According to Your Europe, when you buy as a consumer from a business seller, you have at least two years of legal rights for faulty goods from the date you receive them, and these rights apply against the seller. A voluntary manufacturer’s warranty is separate and doesn’t replace these rights.

Can I publish someone else’s instrumental loops after editing them?

There’s no general answer without knowing where the specific loop came from, its licence and how you plan to use it. Germany’s Copyright Act lists reproduction and making works available to the public as exploitation rights. Section 51a sets out a specific exception for caricature, parody and pastiche; it doesn’t give blanket permission to use all samples. Check the rights for your specific loop before publishing it.