Who’s mixing or recording?

Mixers who aren’t recording new takes

Mixing existing tracks at a desk? First check whether your current headphone or speaker output meets your needs.

Musicians recording occasional overdubs

You’re mixing a demo and also recording vocals, an instrument or a stereo signal. The key is having suitable inputs for all the sources you’re using at the same time.

Ensemble and drum recordists

You want to capture several microphones on separate tracks in a single take. What counts is the number of built-in microphone preamps, not just the total number of channels advertised.

What should you look for when buying?

What you need What to look for Who should pay particular attention?
Suitable stereo monitoring Check for a headphone socket, suitable monitor outputs and easy-to-reach level controls. Also consider the audio output you already have. If I’m only mixing existing jazz tracks, I want to connect my headphones or monitors as needed and control the volume. Around 36% of consumers put straightforward stereo monitoring first.
Occasional additional takes Count microphone inputs separately from line and instrument inputs. Check for phantom power and direct monitoring if you need them. If I occasionally record vocals or an instrument for a demo, I need suitable inputs for the sources I’m using at the same time. Around 29% of consumers prioritise a small number of additional recordings.
Several microphones at once Compare the number of microphones you need to use at the same time with the built-in microphone preamps. Treat ADAT expansion as a separate option. If I want to record drums or several jazz instruments together on separate tracks, I need to plan each microphone path individually. Around 21% of consumers prioritise multi-microphone recording.
Separate monitoring mixes Check the manual for the exact model to see whether the headphones and line outputs can receive different mixes, and what control software is needed. If I want to hear something different in my headphones from what’s coming through the monitors, I need separately assignable signal paths. Around 14% of consumers value separate routing above all.

Common buying mistakes

  • Assuming advertised inputs are all microphone inputs

    Line inputs and digital ADAT channels aren’t automatically additional built-in microphone preamps. The MOTU M4 has two combo microphone inputs; on the PreSonus Studio 1824c, ADAT channels should be counted separately from its eight built-in preamps.

    Count the XLR microphones you need to use at the same time separately from line and digital channels.

    Compatible external hardware may be needed for additional digital microphone channels.

  • Assuming two volume controls mean two independent mixes

    On the Focusrite Scarlett 2i2 4th Gen, the headphones and line outputs receive the same signal feed, even though their levels can be adjusted separately.

    If you need a separate headphone mix, check the routing for the exact model. Focusrite says the Scarlett 4i4 4th Gen can provide different mixes using Focusrite Control 2.

  • Expecting a recording format to fix room acoustics

    Steinberg’s guide describes 32-bit integer support under specific driver and DAW conditions. That doesn’t tell you whether speaker placement or room reflections are affecting what you hear. Genelec notes that monitor calibration may not fully resolve room-related issues.

    Assess the recording format, speaker placement and room separately.

Key brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for a shared stereo monitoring mix and up to two microphones. The Scarlett 4i4 4th Gen adds line paths and separately routable mixes.

  • According to Focusrite, the Scarlett 2i2’s headphone and line outputs share the same signal feed. With the 4i4, you can assign different mixes using Focusrite Control 2.
  • The 4i4’s two additional analogue inputs are line inputs, not extra microphone preamps.

MOTU

The M4 offers extra analogue line inputs and outputs, as well as MIDI, alongside its two microphone combo inputs.

  • MOTU lists four balanced TRS line outputs and two additional line inputs.
  • The four RCA outputs mirror existing outputs; they aren’t additional independent signal paths.

Audient

The iD4 MKII is designed for a single microphone overdub with an instrument input, while the iD14 offers an expandable option with ADAT.

  • Audient lists one microphone preamp, two line outputs and a dual headphone output for the iD4 MKII. For the iD14, the manufacturer lists two microphone preamps, ADAT and four line outputs.
  • An optical ADAT input doesn’t replace additional built-in microphone sockets.

PreSonus

The Studio 1824c is designed for recording several instruments with microphones at the same time.

  • PreSonus lists eight built-in microphone preamps, two headphone outputs and ADAT expansion.
  • The number of channels available via ADAT depends on the sample rate.

Steinberg

The UR22C is a 2-in/2-out interface with two microphone preamps, MIDI and DSP-powered direct monitoring.

  • The Steinberg manual describes 32-bit integer support under specific driver and DAW conditions.
  • This refers to the supported recording format and shouldn’t be confused with 32-bit float recording.

Suitable products at Joybuy

This product is suited to podcasting and singing along to a backing track. For your jazz mix, also check that its stereo monitor and headphone paths meet your needs.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 Podcast Kit

The described Follow-sing mode is designed for singing along to an original track.

According to the product name, the kit includes two 3.5 mm condenser microphones. It’s described as a sound card or audio interface for PC and Mac.

View at Joybuy

Frequently asked questions

Will a new audio interface automatically improve my jazz mix?

No, not just by adding more inputs. If your current audio output provides the monitoring path you need, extra recording inputs alone aren’t a reason to buy a new interface. Genelec says room reflections and speaker placement should be assessed independently of the interface.

How do I set up a new interface for mixing?

Select the specific interface as your audio device in your operating system and DAW, then connect your headphones or suitable monitors. Audient’s iD4 MKII guide specifically explains how to select the device in a DAW. Driver and routing steps vary by model and operating system.

How many microphone inputs do I need for additional jazz recordings?

Base your choice on how many microphones you want to record at the same time onto separate tracks. Count the built-in microphone preamps: line inputs and digital ADAT channels aren’t automatically extra microphone sockets.

Can I hear a different mix in my headphones from the one playing through the monitors?

It depends on the routing available on the specific model. On the Scarlett 2i2 4th Gen, the headphones and line outputs share the same signal feed. Focusrite says the Scarlett 4i4 4th Gen supports separately routable mixes through Focusrite Control 2.

Can I return an interface bought online if it isn’t right for me?

For a qualifying distance sale, the EU Consumer Portal generally states that you have a 14-day right to cancel, starting from the day the goods are delivered. Check which exceptions apply to your purchase, the seller’s information and any return postage costs.