Who this lighting is for

Filming with hand shadows

If you’re filming from above, puzzle pieces should remain visible even when your hands reach into the shot. So pay attention to the position of the light and how far it spreads across your work surface. Adobe explains that a reflector can redirect existing light and brighten shadows.

Filming for longer stretches

If you’re recording several steps in one go, the light from the window can change with the time of day and the weather. Adobe Lightroom Academy describes extra studio lighting as a way to make results less dependent on the weather and time of day.

Filming at a small table

If there’s little room beside the puzzle, consider whether the light can be attached to the table or positioned on a small tripod. Check that the mount and adjustment height work with the table edge, camera and work surface.

What to look for when buying

For a jigsaw puzzle demonstration by a window, the right lighting depends largely on what’s making filming difficult: hand shadows, changing daylight, limited space or how the colours appear on camera.

What you need What to check before buying Who it matters most to
Hand shadows Test whether the position and angle of the light reach the areas affected by your usual hand movements; try a diffuser or reflector over the puzzle. When my hands cover pieces as I reach for them, I want to light the whole surface rather than just create a bright spot. Around 36% of consumers make hand shadows their main concern.
Consistent light Check the dimming and colour temperature; keep your camera settings constant during a test lasting as long as your planned recording. For longer recordings, I want the picture to look much the same, even when the light from the window changes. Around 29% of consumers prioritise consistent lighting.
Space and mounting Check the table edge and the mounting height you need; see whether your chosen version comes with a clamp or tripod. At a small table, I don’t want a large tripod getting in the way of my camera or puzzle. Around 21% of consumers prioritise space-saving mounting.
Colour and flicker Check the colour-rendering details for the exact model and take a test shot using your planned dimming level and actual video settings. If I want puzzle pieces to remain easy to distinguish by colour and the video to look steady, I test the light and camera together. Around 14% of consumers prioritise colour reproduction or flicker-free footage.

Common misconceptions

  • Assuming lux figures with a reflector apply to a softbox

    The published figures for the amaran 100x S distinguish between the light without accessories and with a reflector. They don’t automatically describe the lighting with a softbox. The Nanlite FS-60B manual also distinguishes between FM accessories and Bowens accessories used with an adapter.

    Only compare figures at the same distance and with comparable accessories. Try the modifier you plan to use and check how it actually lights the puzzle.

  • Assuming a power supply, tripod or battery is always included

    Elgato’s product information for the Key Light Air MK.2 doesn’t list a power supply as included. The NEEWER NL660 is available in versions with or without a tripod, and the manufacturer says NP-F batteries aren’t included.

    Before buying, check the exact version against the box contents and work out what power supply and mount your setup needs.

  • Assuming “flicker-free” means it’ll work with every camera setting

    Nikon explains that visible flicker can depend on the interaction between the frame rate, shutter speed and light source.

    Test the light at your planned dimming level and with the video settings you intend to use.

Key brands at a glance

Elgato

The Key Light Air MK.2 is a desk panel with a clamp mount for a fixed filming setup.

  • Elgato lists adjustable brightness and colour temperature, as well as a mounting height of 60 to 88 cm.
  • According to the manufacturer, full light output depends on using a suitable USB-C power source; a power supply isn’t included.

NEEWER

The bi-colour NL660 panel is an option for a setup where the light is positioned separately.

  • NEEWER lists dimming, a colour temperature range of 3200 to 5600 K and a diffuser.
  • The versions available differ in whether a tripod is included; the manufacturer says compatible NP-F batteries aren’t included. The lux figure isn’t a measurement taken at your puzzle.

amaran

The amaran 100x S is a bi-colour COB light for use with a modifier and enough space for your setup.

  • Aputure lists a colour temperature range of 2700 to 6500 K, CRI 95 and active cooling for this model.
  • Published lux figures distinguish between the light without accessories and with a reflector; they aren’t softbox figures.

Nanlite

The FS-60B is a bi-colour COB light for directional lighting and carefully selected accessories.

  • The Nanlite manual lists a colour temperature range of 2700 to 6500 K and an FM mount.
  • The manual specifies an adapter for Bowens modifiers. Check the mount and make sure your setup is secure before buying accessories.

Ulanzi

The VL81 is a small battery-powered light for a portable setup or targeted fill light.

  • Ulanzi lists dimming, 3200 to 5500 K, USB-C charging and a 1/4-inch thread for small tripods.
  • Its compact design doesn’t mean it will light an entire puzzle evenly.

Joybuy products

The products below provide dimmable fill light for different table setups, from compact camera lights to a COB light with a Bowens mount for a modifier.

MOMAN PC8 RGB camera light

MOMAN PC8 RGB camera light

A good fit as a compact fill light if you want to adjust the brightness and colour to suit your table setup.

2500–9000 K; 0–100% dimming; CRI 95+ and TLCI 96+.

125 g; built-in battery with up to 80 minutes’ runtime at full power; 1/4-inch and cold shoe mounts.

Joybuy
COLBOR W60R RGB video light, 60 W

COLBOR W60R RGB video light, 60 W

A portable option if you want to adapt your fill light to changing daylight from the window.

2700–6500 K; 0–100% brightness; CRI 97+.

60 W; 345 g, as stated in the product name.

Joybuy
COLBOR 200 W bi-colour COB video light

COLBOR 200 W bi-colour COB video light

A good fit for a setup with a modifier if you’re planning to use a COB light for longer puzzle recordings.

200 W; 2700–7000 K; CRI/TLCI 96+.

Bowens mount for compatible accessories.

Joybuy
Portable RGB camera light with battery or USB power

Portable RGB camera light

A compact fill light if you want to adjust the lighting to suit your table setup.

RGB, white and warm light modes; adjustable brightness and colour temperature.

Battery or USB powered.

Joybuy
ULANZI VL49 RGB LED video light

ULANZI VL49 RGB LED video light

A small, portable fill light if you want to direct light to a specific area beside the puzzle.

Dimmable RGB light; 2500–9500 K; 2000 mAh battery.

Magnets on the back.

Joybuy

Frequently asked questions

Do I really need a video light by the window?

Not necessarily. If a test shot shows the puzzle evenly lit enough for the time you need, a white reflector can brighten the shadowed side. It redirects existing light rather than producing its own, though, so an extra light may be useful for more consistent conditions during longer recordings.

How can I test the lighting before filming a puzzle for longer?

Take a short test shot with the camera and lighting setup you plan to use, and move your hands over key pieces. Check the video for shadows, changes in colour and bands. Visible flicker can also depend on the combination of light source and camera settings.

What else should I allow for when buying a video light?

It depends on the model and version. Elgato says the Key Light Air MK.2 doesn’t include a power supply; the NEEWER NL660 is available with or without a tripod, and NEEWER says NP-F batteries aren’t included. The Nanlite FS-60B manual specifies an adapter for Bowens accessories.

What should I look for in an electric video light in Germany?

Check which markings and documents apply to the specific product. Your Europe explains that CE marking is only required for products covered by harmonised EU rules that explicitly require it. The German Federal Network Agency lists checks carried out during market surveillance, including whether the product can be identified, manufacturer details, required instructions and warnings in German, and the declaration of conformity. A CE mark on its own isn’t an independent assessment of quality.