Which display suits you?

Compact counter makers

If you want to display the count in a small space and use separate buttons, you can compare compact OLED, E-Paper and character LCD modules. Adafruit, Waveshare and DFRobot provide specifications for a range of display formats and connections.

Knitters with multiple projects

If you want to retrieve saved counts after switching off your device, you’ll need a storage solution as well as a display, set up in your application. Arduino documents EEPROM as storage that retains its values when the board is switched off; on a Raspberry Pi, the application can save data locally.

Touchscreen builders

If you want to programme larger on-screen buttons or additional views, a compatible Raspberry Pi with a touchscreen could be right for you. Raspberry Pi offers the Touch Display 2 in several sizes; compatibility depends on the size and Pi model.

What to consider when choosing

Small OLED with separate buttons

Best if: you want a compact, self-lit display and plan to use separate buttons for input. The Adafruit module documented here has 128 × 64 pixels and uses I²C.

Bear in mind: this module isn’t a touchscreen and doesn’t store the count itself. Adafruit notes that pixels left on continuously may lose brightness over time.

E-Paper with separate buttons

Best if: you prefer a reflective display that keeps the count visible without an illuminated screen. The documented 2.13-inch Waveshare version uses SPI.

Bear in mind: a visible image doesn’t permanently store the value for your programme. Check the refresh method, panel version and driver for the exact model.

Character LCD with separate buttons

Best if: numbers and short labels are all you need. The DFRobot module displays 16 characters over two lines, connects via I²C and has adjustable backlighting.

Bear in mind: the fixed character grid leaves less room for graphical controls, so you’ll need to plan the buttons and local storage separately.

Small colour LCD with separate input

Best if: you want to show graphical prompts alongside the count in a small space, and SPI suits your setup. The Pimoroni PIM576 documented here measures 1.54 inches and has 240 × 240 pixels.

Bear in mind: plan input and storage separately from the display, and allow for its limited active area.

Raspberry Pi touchscreen

Best if: you want to programme larger on-screen buttons or multiple project views, and you’re using a compatible Raspberry Pi.

Bear in mind: according to Raspberry Pi, compatibility depends on the display size and Pi model; the Pi Zero series isn’t supported. You’ll also need to store the count locally.

Consideration What to check before buying Who is this important to?
Local storage Plan for the controller, non-volatile storage and restoring the count after a restart. If I want to retrieve project counts after switching off, I also consider how the data is stored and loaded. Around 33% of consumers put local storage first.
Input Decide whether you want to use separate buttons or a programmed touchscreen interface. If I want to count rows forwards and backwards with ease, I choose an input method that suits how I use the counter. For around 27% of consumers, ease of counting is the top priority.
Readability Consider lighting, text size and where you’ll position the display; OLED, E-Paper and character LCDs each present information differently. At my knitting spot, I want to see the count at a glance without losing focus on my knitting. Around 20% of consumers prioritise readability.
Connection Check that the model and version, interface, power supply, software library and controller are compatible. If I want to keep using my chosen controller, the display and connections need to be compatible. Around 20% of consumers put connection compatibility first.

Common planning pitfalls

  • Confusing a visible E-Paper count with saved project data

    A displayed image doesn’t guarantee that the programme will restore the number after a restart.

    Before choosing a display, decide where the count and, if needed, multiple project counts will be stored and loaded from when you switch the device on.

    Local storage requires additional programming and, depending on your setup, suitable storage on the controller or a data drive.

  • Choosing a display by size rather than controller connection

    The modules documented here use different connections and power supplies. Raspberry Pi lists the Pi Zero series as incompatible with the Touch Display 2.

    Check the exact display model and version, interface and power supply against your board and the available software support.

    Depending on your setup, you may need additional adapters, a different display or another controller.

  • Assuming a small display provides full touchscreen control

    With the small modules described here, you’ll need to plan input as a separate part of your setup; a touchscreen offers a different way to interact.

    Before buying, decide whether you want to count using separate buttons or on screen.

    Separate buttons add wiring and installation to your setup.

Display brands to consider

Adafruit

The documented 0.96-inch OLED is a compact, self-lit display, ideal if you’re building the input separately.

  • According to Adafruit, the module featured offers 128 × 64 pixels, a choice of I²C or SPI, and a 3 V/5 V connection suitable for the board.
  • The graphics library used requires display buffer memory. Adafruit notes that pixels left on for long periods may lose brightness.

Waveshare

The documented 2.13-inch E-Paper HAT range is a compact, reflective SPI option.

  • Waveshare lists a resolution of 250 × 122 pixels and an SPI connection for the black-and-white version featured here.
  • Check the refresh method and partial refresh support for the exact panel version; specifications for one version don’t automatically apply to other panels.

DFRobot

The Gravity I2C LCD1602 DFR0555 is a good fit for text if numbers and short labels are all you need.

  • According to DFRobot, the module displays 16 characters over two lines, uses I²C, runs on 3.3–5.0 V and has adjustable blue backlighting.
  • The fixed character grid leaves less room for graphical controls.

Pimoroni

The PIM576 is a small colour display with SPI for additional graphics.

  • Pimoroni lists the module as 1.54 inches with 240 × 240 pixels, and provides libraries for Raspberry Pi and Pico.
  • Bear the limited active area in mind when planning the numbers and any additional information you want to display.

Raspberry Pi

The Touch Display 2 is a larger display option for a self-programmed interface on a compatible Raspberry Pi.

  • Raspberry Pi documents touch control and sizes of 5, 7 and 10 inches.
  • Compatibility varies by display size and Pi model; Raspberry Pi states that the Pi Zero series isn’t supported. The display doesn’t replace a storage solution for your count.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Does an E-Paper display save the count automatically?

No. An image that stays on screen doesn’t replace programmed recovery of the number. Plan to save the count on a suitable controller or data drive, and test that it reloads after a restart.

How can I keep the count locally without using the cloud?

On a supported AVR Arduino board, your application can use EEPROM; its documented write limits mean you should avoid unnecessary repeated writes. On a Raspberry Pi, you could save the data in a local file. It’s a good idea to keep an additional backup of important project counts.

Will the Raspberry Pi Touch Display 2 work with a Pi Zero?

No. According to Raspberry Pi’s official compatibility overview, the Pi Zero series isn’t compatible. For other Pi models, also check the display size you’ve chosen.

What else do I need besides the display?

Depending on your setup, you’ll need a compatible controller, a suitable power supply and connection components. If your display isn’t touch-sensitive, you’ll also need a separate input method. Adafruit states that a STEMMA-QT cable isn’t included with the specific OLED board described here; check what comes with the product you choose.

What should I know about cancellation rights and CE marking when buying online in Germany?

According to the Verbraucherzentrale, online orders generally come with a 14-day cancellation period from the date you receive the goods; check the exceptions and contract terms for your individual circumstances. Under European Union guidelines, CE marking is only required for products covered by the relevant harmonised rules. If you sell a DIY build under your own name, you may take on manufacturer obligations for the finished product; a component’s marking doesn’t prove that the completed build complies.