Which lighting set-up is right for you?

Photographing full table arrangements

If you’re showing the whole decoration, the light needs to reach the edges of the table and the lace too—a bright spot in the middle of the image isn’t enough.

Creating photos that show colours accurately

If you photograph white or coloured lace regularly, you’ll need to balance the existing ambient light with the light’s colour temperature and the white balance.

Photographing fine lace details

For close-ups, you can change the direction of the light to bring out the texture and openwork, while making sure shadows don’t obscure the pattern.

What should you look for when buying?

Plan your lighting set-up around the whole table first, then consider how you can adjust the direction, diffusion and white balance for close-up shots.

What matters when buying What to look for Who is it important to?
Even light across the whole arrangement Check the area you’ll be photographing, positioning and mounting, as well as suitable diffusion and what’s included. If I’m photographing the whole arrangement, the edges of the table and the lace need enough light too. That’s why around 36% of consumers prioritise even lighting across the whole area.
Accurate fabric colours Check the white light range and dimming options; set the white balance on your actual set using a neutral reference. When photographing white or coloured fabrics under artificial light, I want to be able to check for colour casts and set the white balance accordingly. Around 29% of consumers prioritise accurate fabric colours.
Visible patterns and controlled shadows Make sure you can adjust the direction and height of the light; plan for diffusion and test shots of both the full arrangement and close-up details. For fine lace details, I want to be able to position the light to the side without harsh shadows obscuring the openwork. Around 21% of consumers prioritise visible texture.
Power supply and accessories Check whether it runs on mains power or a battery, the runtime in your planned mode, light modifier compatibility, the stand and what’s in the box. If I need to change where I’m shooting or keep cables and accessories to a minimum, the set-up needs to suit. Around 14% of consumers prioritise a portable, simple set-up.

Video light buying pitfalls

  • Assuming the highest lux figure proves even coverage

    Manufacturers’ figures for COB lights are measured at a specified distance with a particular reflector. They don’t tell you how evenly a softbox will light a table.

    Compare the measurement conditions and allow for the distance, coverage and a test shot of the entire decoration.

  • Choosing a softbox based on its name alone

    Fittings vary. According to the manufacturer’s manual, the Nanlite FS-60B has an FM mount; you’ll need a Bowens adapter to use Bowens accessories.

    Before ordering, check that the light model, mount, required adapter and box contents are all compatible.

    You may need to buy a suitable adapter or a different light modifier separately.

  • Assuming the product name means it’s a complete lighting kit

    Battery-powered doesn’t automatically mean batteries are included, and a light won’t necessarily come with a light modifier or stand.

    Check the exact version and what’s included. Rollei says batteries are not included with the LUMIS Panel 600 RGB; softboxes are listed as optional for the SmallRig RC 60B Lite Edition.

Key brands at a glance

amaran

The COB 60x S is a compact bi-colour point light source for a set-up using a Bowens light modifier of your choice.

  • According to amaran: 2,700–6,500 K, dimmable and with a Bowens mount.
  • The figure of 33,300 lx at 1 m and 5,600 K applies to the narrow Hyper Reflector supplied with the light.
  • This lux figure doesn’t show how the light performs with a softbox or across an entire table; there’s no evidence that a stand is included.

Godox

The mains-powered SL60IIBi is an example of a bi-colour COB light for a fixed set-up with a modifier that shapes the light.

  • According to Godox: 2,800–6,500 K, a dimming range of 0–100% and a Bowens mount.
  • The manufacturer’s figure of 25,100 lx at 1 m is measured with the standard reflector.
  • The light needs mains power. Its performance with a different softbox should be assessed separately.

Nanlite

The FS-60B is a bi-colour light for a fixed shooting position, provided its FM accessory mount suits your planned set-up.

  • The Nanlite manual specifies 2,700–6,500 K and mains operation via AC 100–240 V.
  • The manual states that a Bowens adapter is required for Bowens accessories. FM and Bowens mounts aren’t interchangeable when buying accessories.

SmallRig

The RC 60B COB LED Video Light (Lite Edition) is worth considering for changing shooting locations and short sessions away from a nearby power socket.

  • According to SmallRig, the EU version 4518B has a built-in battery and adjustable white light from 2,700–6,500 K.
  • SmallRig quotes a runtime of 45 minutes at maximum power, or 75 minutes in ECO mode.
  • Softboxes are listed as optional. Don’t assume specifications for other RC-60B versions apply without checking.

Rollei

The LUMIS Panel 600 RGB is an adjustable panel for a shooting position with space for the panel, power supply and mount.

  • Rollei’s German manufacturer page lists 2,500–9,000 K and stepless brightness adjustment.
  • It can run on batteries.
  • Rollei says batteries aren’t included. For accurate lace photography, RGB effects are no substitute for suitable white light and careful positioning.

Joybuy products for your lighting set-up

The Joybuy products below offer different ways to light lace table decorations, from a photo box to COB, ring and compact video lights. Check that the light’s coverage, diffusion and positioning suit your arrangement, and check what’s included along with the safety markings and manufacturer information that apply to the specific device.

Foldable LED photo box with coloured backgrounds and adjustable brightness

Foldable LED photo box with coloured backgrounds

A photo box may be suitable for product photography if the lace decoration fits within its shooting area.

According to the product description, both brightness and light colour are adjustable, and a diffuser cloth is included. The description lists three light colours and nine brightness levels.

Joybuy
COLBOR 200W bi-colour COB LED video light with Bowens mount

COLBOR 200W bi-colour COB LED video light

It may suit a fixed lighting set-up if you want to use a Bowens light modifier.

The product title specifies 200 W, 2,700–7,000 K, a COB light source, a Bowens mount and an integrated power supply design.

Joybuy
10-inch ring light with remote control and 63-inch tripod

10-inch ring light with remote control and 63-inch tripod

This ring light is an option for a simple video set-up if its shape and position suit your table arrangement.

The product title lists a 10-inch ring light, a remote control and a 63-inch tripod. It also specifies three colour temperatures and ten brightness levels.

Joybuy
LED ring light with RGB colours, adjustable brightness and smartphone holder

LED ring light with RGB colours and smartphone holder

It may be suitable for video recording if you can position the ring light and tripod to suit the decoration.

The product description lists a tilting ring light, a height-adjustable tripod and a smartphone holder. It also says that brightness and colour temperature are adjustable.

Joybuy
ULANZI VL49 RGB LED video light with battery

ULANZI VL49 RGB LED video light

A compact battery-powered light may be useful for changing shooting locations or close-up details; check whether its light coverage is enough for the whole arrangement.

The product title lists a 2,000-mAh battery, dimmable brightness, 2,500–9,500 K and magnets on the back.

Joybuy

Frequently asked questions

How should I start lighting a lace table decoration?

Start by photographing the whole table and checking for dark edges. Then adjust the light’s position and, if needed, its diffusion; for close-ups, you can change the angle. Check whether the shadows show the pattern or obscure it.

Is a bi-colour light enough to make white lace look white in photos?

No. The bi-colour setting alone doesn’t guarantee neutral colour reproduction. Set the white balance under the lighting you’ll actually use and check it with a neutral reference. Nikon notes that using a white card to set the white balance in mixed lighting can change how white fabrics are rendered compared with automatic white balance.

Will any Bowens softbox fit directly onto a Nanlite FS-60B?

No. According to the Nanlite manual, the FS-60B has an FM mount; you need to fit a Bowens adapter before using Bowens accessories. Also check whether the adapter, softbox and stand are included with the specific product.

What should I check for electrical product safety in Germany?

Check whether harmonised EU rules requiring CE marking apply to the specific model, and whether the manufacturer’s information and product identification are clear. The European Union explains that CE marking is only required for products covered by relevant harmonised rules that require it; on its own, it is not an independent quality mark for an individual listing.

What are my rights in Germany if a product is faulty or I return an online order?

For consumer purchases, statutory rights relating to faulty goods generally apply against the seller and are separate from a voluntary manufacturer’s guarantee. The Verbraucherzentrale explains that online purchases generally come with a 14-day right to cancel. Depending on the circumstances, the period starts when the contract is made or when the goods are received, and statutory exceptions apply.