Who might need a headphone amplifier?

Headset users who make lots of calls

If you need a headset microphone and a way to mute it as well as listen to audio, a headphone output alone won’t necessarily do the job. Creative describes the Sound Blaster PLAY! 4 as suitable for headsets with a microphone; also check your headset’s features.

Users whose wired headphones are too quiet

If your headphones don’t reach the volume you want when connected to your laptop, compare their requirements with the specifications for the output you plan to use. Impedance alone doesn’t determine whether an amplifier is suitable for your headphones.

Users with a permanent audio desk setup

If you want to connect headphones and, if needed, active speakers to one device and control the volume at your desk, check that it has the right headphone and line outputs. FiiO, Fosi Audio and iFi audio list these connections on certain desktop devices.

What should you look for when buying?

Keep using your laptop’s output

A good fit if: the volume, connections and freedom from interference of your existing output meet your needs.

Trade-off: You won’t gain any extra outputs or controls.

USB DAC with headphone amplifier

A good fit if: you want a digital USB audio connection from your laptop and, if needed, extra connections at your desk.

Trade-off: Check the data connection and power supply, plus the microphone input and headset compatibility if you make calls.

Purely analogue headphone amplifier

A good fit if: your laptop’s analogue output is a suitable signal source and you want separate amplification at your desk.

Trade-off: It won’t replace a USB DAC or bypass potential interference in the analogue input signal.

What you need What to check before buying Who it matters most to
Microphone and call controls Check for a microphone input, headset connector, mute function and support for your calling software. If I make calls with a headset, I need a working microphone connection and suitable controls. Around 31% of consumers say calls are their main concern.
Suitable volume headroom Check the specifications for the output you’ll actually use and a comparable headphone load; start at a low volume. If my headphones are too quiet when connected to my laptop, I look for suitable, controllable amplification. Around 31% of consumers say volume headroom is their main concern.
USB or analogue signal path Check the USB data connection and power supply; for an analogue input, also factor in the audio cable you’ll need. If I want to bypass my laptop’s analogue output, a USB audio connection matters to me; with an analogue amplifier, the existing signal source must be suitable. Around 23% of consumers say the signal path is their main concern.
Connections at your desk Check that the headphone connector and speaker output you need are available, and that you have enough free laptop ports and the right items are included. If I want to use headphones and active speakers at the same desk, the right outputs and space for extra cables matter. Around 15% of consumers say connection options are their main concern.

Common buying mistakes

  • Confusing a headphone output with a complete headset connection

    For calls, the microphone connection must work too. A headphone output alone doesn’t mean you can connect a microphone.

    Before buying, check the microphone input, connector wiring and compatibility with your headset.

    Depending on your headset, you may need an additional microphone adapter or a different USB audio solution.

  • Assuming a power rating applies to every socket and every pair of headphones

    Output power specifications apply to the stated socket, load and measurement conditions. Figures for different outputs can’t necessarily be compared directly.

    Compare the specifications for the output you actually plan to use, and start at a low volume.

  • Confusing USB power with a USB audio input

    According to the manufacturer, the Douk Audio U3 receives an analogue audio signal via RCA; USB on the supplied cable is described as a power connection.

    Check the signal connection, power supply and included items separately.

    You may need to allow for a suitable audio cable and power supply for the U3; according to Douk Audio, a power adapter isn’t included.

  • Assuming similarly named models are interchangeable

    FiiO lists different versions of the E10K: the manufacturer specifies Micro-USB for the older E10K, while the E10K Type-C is a different version.

    Check the full model name and the connections on the device being offered.

Brands and product ranges to consider

FiiO

The range includes everything from compact USB DACs to desktop devices; check the exact version and the outputs you need for each model.

  • FiiO says the K11 has a USB-C data input, 6.35 mm and 4.4 mm headphone outputs, and an RCA line output.
  • According to the manufacturer, the older E10K uses Micro-USB; the E10K and E10K Type-C are different versions.

Creative

The Sound Blaster PLAY! 4 is a compact USB solution that Creative describes as suitable for wired headsets with a microphone.

  • Creative lists a microphone mute button and SmartComms features designed for Windows.
  • According to Creative, headset button functions depend on how the individual headset is configured; advertised communication benefits are the manufacturer’s claims.

Fosi Audio

The Q4 is a desktop DAC/headphone amplifier with digital inputs and an RCA output.

  • Fosi Audio EU lists 160 mW RMS at 32 Ω, 20 Hz–20 kHz and 0.01% THD, as well as bass and treble controls.
  • The power rating applies to the stated load and measurement conditions; it doesn’t confirm the output for other loads.

iFi audio

The ZEN DAC 3 is designed for a permanent USB audio setup, with headphone and speaker connections.

  • The manual lists USB-C for audio and power, 6.35 mm and 4.4 mm headphone outputs, RCA and switchable gain.
  • A 5-V DC power supply isn’t included, according to the manual. Turn the volume down before changing the gain.

Douk Audio

The U3 is an analogue mini headphone amplifier for use with an existing analogue signal source.

  • Douk Audio lists an RCA stereo input and a 6.35 mm headphone output; a 3.5 mm adapter is included.
  • According to the manufacturer, a power supply isn’t included. USB on the supplied cable is described as a power connection, not a USB audio input.

AudioQuest

The DragonFly Black v1.5 is a compact USB DAC/headphone amplifier for a portable laptop setup.

  • AudioQuest lists laptop compatibility and a 1.2 V output.
  • If you need USB-C or a headset microphone, check separately which adapters you’ll need and how the microphone will connect; AudioQuest doesn’t describe an integrated microphone function.

Joybuy products for your desk

The models below cover a USB DAC/headphone amplifier for your desk and analogue desktop amplification.

Nobsound Q4 USB audio gaming DAC converter with Bluetooth headphone amplifier

Nobsound Q4 USB audio gaming DAC with Bluetooth headphone amplifier

For a PC audio setup when you want a USB audio DAC and headphone amplifier in one device.

The product title mentions Bluetooth and lists PC, PS5 and computer use.

View at Joybuy
Douk Audio T4 PRO mini valve tube desktop headphone amplifier

Douk Audio T4 PRO mini valve tube desktop headphone amplifier

For an analogue laptop output when you want separate amplification at your desk.

The analogue signal path described doesn’t replace separate USB audio conversion. The product title also mentions an MM phono preamplifier and GE5654 valves.

View at Joybuy

Frequently asked questions

Will my wired headset’s microphone work with any headphone amplifier?

No. A headphone output alone doesn’t mean there’s a microphone input. Creative describes the Sound Blaster PLAY! 4 as suitable for headsets with a microphone and notes that headset button functions depend on how the individual headset is configured. Check the connectors and calling software for your setup.

How do I connect a purely analogue U3 to my laptop?

According to Douk Audio, the U3 takes an analogue signal through its RCA stereo input and has a 6.35 mm headphone output with a 3.5 mm adapter. You’ll need a suitable analogue connection from your laptop and an appropriate power supply; the manufacturer says a power adapter isn’t included.

What should I bear in mind when adjusting gain and volume?

Start at a low volume, especially before changing the gain; the iFi ZEN DAC 3 manual also advises this. The World Health Organization (WHO) gives a guideline of up to 40 hours per week at an average of 80 dB, and four hours at 90 dB.

Do I need an additional headphone amplifier if my laptop is already loud enough?

Not just for higher figures on the spec sheet. If the volume, connections and freedom from interference meet your needs, you can keep using your laptop’s output. An extra device is mainly worth considering if you need a particular signal path, additional connections or more suitable volume headroom.