Which setup is right for you?

Overhead explainers

If you show the whole board and demonstrate moves with your hands, make sure the playing areas remain easy to see even when your hands cast changing shadows.

Card game explainers

With glossy cards or game boards, it’s important to control reflections so they don’t obscure any printed details.

Home studio creators with limited space

If you’re filming beside a dining or desk area, position the panel, mount and cables securely without letting them encroach on the playing surface.

What should you look for when buying?

These proportions are intended as a guide for shoppers choosing an LED panel for board game explainer videos. Each person’s main buying consideration is highlighted.

Consideration What to check when buying Who it matters most to
Lighting the board and hands Check the side position and dimming; review the centre and edges of the board, as well as your hands, in a test clip. If I want to show the board and moves at the same time, my hands mustn’t obscure important spaces. Shoppers with this as their main concern are estimated to make up around 29%.
Controlling reflections Test the diffusion and adjustable light angle; film the cards you’ll actually use. With glossy cards, I want to be able to see the printed details clearly despite the lighting. Shoppers who prioritise reducing reflections on cards are estimated to make up around 23%.
Showing game colours accurately Compare adjustable white light and the manufacturer’s colour-rendering information; keep the camera’s white balance constant during testing. If cards, tokens and figures need to remain easy to tell apart by colour, how they look in your own setup matters more than a single specification. Shoppers with this priority are estimated to make up around 18%.
Avoiding flicker Record a test clip using your planned dimming level and camera settings; if you see bands, check the available shutter-speed settings. For me, a video without visible bands is essential before I publish a recording. Shoppers who prioritise flicker-free footage are estimated to make up around 18%.
Planning for space and power Check the parts list for the exact version, the mount and your planned power supply. If I’m setting up beside a small table, the light and cables need to fit safely. Shoppers with this as their main concern are estimated to make up around 12%.

Common buying mistakes

  • Assuming high wattage or lux figures mean even lighting across the board

    The figure of 5.070 Lux that Aputure gives in the manual for the amaran P60x applies at a distance of 1 m and 5.600 K. It doesn’t show that the whole board will be lit evenly.

    Compare measurements only under like-for-like conditions, and check the centre and edges of the board, as well as your hands, in a test video.

  • Trying to make glossy cards easier to read by simply increasing the brightness

    Bright spots and reflections can make printed details difficult to see on glossy surfaces.

    First, adjust the angle of the light and camera, then test any available diffusion with the cards you’ll actually use.

  • Assuming battery support or a product photo means everything is included

    The NEEWER NL660 versions differ in whether they include a stand; according to the manufacturer, compatible NP-F batteries are not included.

    Before buying, check the parts list for the exact version, as well as the power connection and mounting options.

Key brands at a glance

NEEWER

The NL660 is a bi-colour panel for an adjustable setup. The EU product page lists versions with and without a stand.

  • NEEWER says a diffuser and power supply are included; the panel offers a colour temperature of 3.200–5.600 K.
  • According to the manufacturer, NP-F batteries are not included. Check the parts list for the version you choose.

Rollei

The LUMIS LED Panel Bi-Color is documented for use on a fixed filming table.

  • Rollei specifies a surface measuring 35 × 24 cm, a colour temperature of 3.200–5.600 K, dimming and a CRI above 96.
  • Optional NP-F batteries are not included in the stated package contents. The manufacturer’s claim that the light is non-dazzling is no substitute for testing it with reflective cards.

Godox

The P260C Pro is a bi-colour panel with diffusion and power options described by the manufacturer.

  • Godox specifies 2.800–6.500 K, a maximum input power of 45 W, and average CRI and TLCI values of at least 98.
  • Claims about softer shadows and colour accuracy come from the manufacturer. Check the power accessories and mounting options for the specific version.

amaran

The P60x is a bi-colour panel for setups where light positioning and cooling need to be taken into account.

  • Aputure specifies 3.200–6.500 K, CRI ≥ 95 and active cooling in the manual.
  • The manual’s figure of 5.070 Lux applies at 1 m and 5.600 K. Also check the space it needs and whether cooling noise could be an issue in your setup.

Nanlite

According to the manual, the PavoSlim 60B is a slim bi-colour panel supplied with a softbox, diffuser and grid.

  • The manual specifies 2.700–6.500 K, along with mains, NP-F and V-mount options.
  • Light modifiers and controls take up space. Check which power components are included with the specific version.

Joybuy products

Products to suit you will be available soon.

Frequently asked questions

Do I need two panels to demonstrate moves with my hands?

No. Start with one adjustable main light and film several hand movements. If important parts of the game remain in shadow, try a softer fill light on the opposite side and check whether it creates any new reflections.

What can I do if bands appear in my video?

First, test the dimming level and camera settings you actually plan to use. Sony Support notes that changing the shutter speed can reduce flicker; check the setting with your camera and the light you’re using.

Does a panel come with a stand and battery?

It depends on the model and version. NEEWER lists a stand for the NL660 only with the “NL660 with Stand” version, and says compatible NP-F batteries are not included. Before buying, compare the parts list with what you’ll need for your setup.

What should I know about markings, guarantees and disposal?

The EU explains that CE marking is required only for products covered by relevant harmonised EU rules that expressly require it; it is not a general independent quality mark. Under the EU rules described, the seller is liable for any lack of conformity that existed when consumer goods were delivered and becomes apparent within two years. In Germany, electrical equipment that has reached the end of its life must be collected separately from household waste.