Who is this guide for?

Artists working at a small table

If you film from above or at an angle, your paper, hands and camera all need to fit in the same small space. Elgato describes a desk clamp, while Rollei offers a table tripod – the mounting option you choose affects how much workspace you have left.

Pastel artists who care about colour

If you want to show colour mixes consistently across several recordings, try to keep the light colour and camera white balance as constant as possible. Canon Europe explains that the colour temperature of the light affects how the camera reproduces colour.

Artists who change their setup

If you put the light away after filming or draw in different places, compact dimensions, a suitable mount and the right power supply all matter. The options described range from a table tripod to a battery-powered panel, including models from Rollei and Ulanzi.

What should you look for when buying?

First, decide where the panel, camera and drawing hand will fit on your table. Then check the light colour, shadows and power supply with your specific setup in mind.

The following priorities are for people filming pastel drawings at a small table. Each row focuses on the main concern.

Concern What to check before buying Who will find this especially important?
Space and positioning Clamp range and accessible table edge, or the footprint of the stand; height, tilt and cable routing. If I need to fit my drawing area, hands and camera into a small space, the light needs to sit outside my workspace. That’s why around 25% of consumers put flexible positioning first.
Pastel colours Colour temperature and colour rendering for the exact model version; keep ambient light as constant as possible and record a test with a fixed white balance. If I want to compare colour mixes across several videos, I need the lighting and camera settings to stay as consistent as possible. Around 25% of consumers prioritise colour reproduction for this reason.
Hand shadows Record a short clip from your planned camera angle with your hands over the paper; check the tilt and, where applicable, the diffuser on the specific version. If my hand could obscure important strokes while I’m drawing, I want to check the lighting angle on camera beforehand. Around 20% of consumers prioritise showing their working process without distracting hand shadows.
Flicker and banding Record a short clip at your planned frame rate, shutter speed and dimming level; check your camera settings if you see banding. If I want to record a video without visible banding, the panel needs to work with my camera settings. That’s why around 15% of consumers pay particular attention to flicker-free recording.
Power supply What’s included, the connection and the required power supply rating; for battery operation, check the runtime at the brightness you need and whether you have a suitable mount. If I’m planning longer recordings or often setting up and packing away the light, I want to make sure the power source and setup are right beforehand. Around 15% of consumers prioritise the power supply and having everything they need for their setup.

Common selection mistakes

  • Assuming every light with “VL49” in its name is the same model

    Ulanzi describes one VL49 version with fixed white light. An RGB version is not automatically the same model.

    Check the full model version, light colour, mount and what’s included with the specific product listing.

  • Planning to use maximum brightness without the right power supply

    The maximum brightness specified by the manufacturer for the Elgato Key Light Air MK.2 requires a suitable power supply of at least 30 W; the manufacturer says that a power adapter is not included.

    Compare the required power with your power source and check what comes with the specific product listing. You may need to buy a suitable power adapter separately.

  • Assuming the manufacturer’s light-quality claims guarantee good video results

    Ambient light and camera white balance affect colour reproduction. Visible banding also depends on the combination of LED light and camera settings. For 50 Hz mains environments, Sony lists 1/50 s or 1/100 s as possible shutter speeds under certain conditions.

    Record a short clip using your planned camera angle, white balance and settings. Canon Europe explains how the colour temperature of the light affects the colours captured by the camera.

Brands to consider

The details below relate to the specific product lines mentioned. They’re no substitute for testing with your own paper, hands and camera setup.

Elgato

The Key Light Air MK.2 is a medium-sized white-light panel with a desk clamp, designed for a fixed position.

  • Elgato specifies a clamp for desks up to 6 cm thick, a temperature range of 2900–7000 K and a CRI of over 94.
  • The maximum brightness specified by the manufacturer requires at least 30 W; a power adapter is not included. These details do not automatically apply to older Key Light models.

Rollei

The LUMIS Key Light is a panel with a table stand, for a setup that doesn’t require a desk clamp.

  • Rollei specifies a height-adjustable stand, a ball head, three colour temperatures and eight brightness levels.
  • The stand takes up space on your table, so check that you’ll still have enough room for your paper and camera.

Ulanzi

The VL49 version described here is a compact battery-powered panel with fixed white light.

  • For this version, Ulanzi specifies a weight of 90 g, a 2000-mAh battery, USB-C charging and a colour temperature of 5500 ± 200 K.
  • The colour temperature is fixed. VL49 RGB versions should not be assumed to be the same just because they share the model name.

Godox

The P260C Pro is a larger bi-colour panel for a setup with room for both the light and its mount.

  • Godox specifies 2800–6500 K, a diffuser and average CRI and TLCI values of at least 98.
  • The claim that the light is softer comes from the manufacturer and doesn’t prove how hand shadows will look on your pastel drawing.

NEEWER

The RGB660 PRO II is a larger panel with adjustable white light and RGB features, designed for a separate setup.

  • The manufacturer specifies 3200–5600 K in bi-colour mode, CRI 97+, a diffuser and mains power.
  • A stand is not included with the single panel in some versions; the manufacturer also says that batteries are not included.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position the panel when filming?

Place it outside your drawing area and angle it towards the paper and your hands. Record a short drawing movement from your planned camera position to see whether your hand obscures any important strokes. An adjustable height and tilt make it easier to tweak the angle for this test.

Is a high CRI enough to capture pastel colours accurately?

No. A CRI value alone can’t guarantee a particular colour result in your video. The light colour, ambient light and camera white balance all play a part too. Keep the lighting as consistent as possible and record a colour test with a fixed white balance.

What can I do if I see banding in the picture?

First, check a clip at the dimming level you plan to use, then adjust the camera shutter speed if necessary. For environments with a 50 Hz power supply, Sony lists 1/50 s or 1/100 s as possible settings; the right option depends on your camera and light source.

Will I need to buy a power supply or mount separately?

That depends on the model and product version. According to the manufacturer, the Elgato Key Light Air MK.2 comes with a clamp and cable, but not a power adapter. Maximum brightness requires at least 30 W. So before buying, check the exact version and what’s included.

What should I look out for when it comes to electrical safety in Germany?

The German Federal Network Agency lists correct CE marking, verifiable manufacturer details and a declaration of conformity among the points it checks during market surveillance. This information does not mean that a specific product listing has already been checked.