Who photographs linocuts at a small table?

Photographers with a fixed table setup

You photograph one or more linocuts from the same stable camera position and want to take pictures without touching the camera body.

Photographers who change their setup

You adjust the print or lighting between shots and don’t want to return to the camera every time.

Photographers looking to avoid extra accessories

You want to check first whether the self-timer or an app compatible with your camera is already enough for the job.

What should you look for when choosing?

First, check whether your existing camera can provide the hands-free shutter release you need. If you need an extra accessory, compatibility and how much room you have to move around the table are the main things to consider.

What you need What to check before buying Who is this important for?
Camera compatibility Check the full camera model, connection or explicitly supported wireless feature. If I want to take pictures with my specific camera, I check the model and connection. Around 36% of consumers prioritise this compatibility above all else.
Steady shutter release For a wired remote release, check that the connection is right and the cable is long enough. With a fixed setup, I want to take repeated shots without touching the camera body. Around 29% of consumers put a steady shutter release first.
Freedom to move Check that the camera and remote support the feature, and whether the receiver may need a cable. If I change the print or lighting between shots, I don’t want to be tied to a spot next to the camera. Around 21% of consumers prioritise this freedom to move.
Make use of accessories you already own Try the self-timer and a compatible app with your actual setup before buying a remote release. If the camera stays in place on the table and a short delay is fine, I want to make the most of the features I already have. Around 14% of consumers prioritise avoiding an additional accessory purchase.

Avoiding common buying mistakes

  • Choosing based only on the camera brand

    Even within the same camera system, connections and supported remote controls can vary. A remote release designed for a different model may not work.

    Check the full camera model against the connection or compatibility details for the specific remote release.

    An incompatible accessory could mean extra hassle with returns or having to buy another one.

  • Assuming ‘wireless’ means ‘no cables at all’

    With a wireless system, the connection between the handheld transmitter and receiver may be wireless, but the receiver might still need to connect to the camera.

    Before buying, check what’s included and whether you need a compatible camera cable.

    Rollei states that the Wireless Remote Release 28146 requires a camera cable selected to match your camera.

  • Expecting a remote release alone to produce sharp details

    Taking a picture without touching the camera won’t prevent an unstable camera setup or incorrect focus from affecting the shot.

    Stabilise the camera and check the focus on the print before comparing shutter release options.

Relevant brands and systems

Canon

Canon offers model-specific wired and Bluetooth remote releases, as well as Camera Connect for supported cameras.

  • Canon lists an E3-compatible 2.5 mm connection and an operating range of 80 cm for the RS-80E3.
  • Canon says the BR-E1 works with certain listed cameras; app features also vary by camera. Check support for your model.

Nikon

Nikon offers wired remote releases for certain camera groups and SnapBridge for supported camera and mobile device combinations.

  • Nikon describes the MC-DC2 as suitable for certain DSLR cameras and the MC-DC3 for Z cameras with a compatible connection. Nikon lists half-press and a locking mechanism for the MC-DC3.
  • Nikon does not guarantee that SnapBridge will work on every mobile device. Check your camera and mobile device combination.

Sony

The RMT-P1BT is a Bluetooth remote control for cameras that support this model.

  • Sony says the RMT-P1BT uses the camera’s built-in Bluetooth receiver, so there’s no need for a separate wired receiver.
  • These features apply to the RMT-P1BT and don’t automatically apply to other remote controls. Check compatibility with your camera model.

Rollei

The Wireless Remote Release 28146 is a wireless option with an interval function for compatible camera and cable combinations.

  • Rollei lists a battery-powered wireless remote and a range of up to 50 m for this model.
  • Rollei says a camera cable selected to match your camera is required. The range is a manufacturer’s specification.

Joybuy product selection

This selection is for taking photos with a smartphone using a Bluetooth remote release and a stand that can be set up on a table.

KINSI selfie stick with tripod and Bluetooth remote release

KINSI selfie stick with tripod, 170 cm, Bluetooth remote release

If you’re photographing the linocut with a smartphone and want to set it up on the table, this stick gives you a stand and a Bluetooth shutter release for your phone’s camera.

  • Extends to 170 cm
  • 360° rotating phone holder
  • Product name specifies smartphones from 4.7 to 6.0 inches
  • Stainless steel selfie stick with tripod
View on Joybuy

Frequently asked questions

Do I need to buy a remote release for a single linocut?

Not necessarily. If your camera is set up securely and has the self-timer or app-based remote shooting you need, try that first, then check the focus and framing.

How do I set up app-based remote shooting?

First, check whether the manufacturer’s app supports your exact camera model and mobile device, then connect them by following the manufacturer’s instructions. Canon describes remote shooting with Live View in Camera Connect, but says that not all app features are available with every camera.

What should I check is included with a wireless remote release?

Check whether a compatible camera cable and the batteries you need are included or have to be bought separately. Rollei says the Wireless Remote Release 28146 requires a compatible camera cable.

How can I avoid buying an incompatible wired remote release?

Compare the full camera model and connection with the compatibility details for the specific remote release. For example, Canon says the RS-80E3 is designed for compatible 2.5 mm E3 connections; other remote releases have different requirements.

Will a remote release automatically focus the shot?

No. It lets you take a picture without touching the camera body, but it can’t replace a stable camera setup or checking the focus on the linocut.