First, check that the lens is compatible with your camera mount. Then decide whether you’ll mostly be photographing the whole badge or tiny embossed details. You don’t automatically need the highest possible magnification to capture the whole badge. For close-ups, you’ll also need room for lighting and, if necessary, focus stacking to increase depth of field.
Who should consider this choice?
Photographers with an existing interchangeable-lens camera
If you’re looking for a lens for your existing camera body, first check the mount and its exact variant. Nikon Deutschland, Sony Deutschland and Sigma Deutschland list different compatible mounts for their macro lenses.
Collectors who appreciate embossed details
For tiny lettering, edges or signs of wear, the key question is whether the magnification ratio gives you the framing you need. Canon Deutschland specifies up to 1.4x magnification for the RF 100 mm, while Venus Optics lists up to 2:1 for the Laowa 65 mm.
Photographers working at a small table
If you’re arranging badges and lighting in a confined space, allow for clear space in front of the lens and a stable camera position. Nikon Deutschland specifies a distance of around 5 cm between the lens and subject at the closest focusing distance for the Z MC 50 mm.
What should you look for when buying?
Start by checking the camera mount, then decide on the framing you need. Finally, consider the space available for lighting and the depth of field your setup requires.
| Requirement |
What to check when buying |
Who is this important to? |
| Camera mount |
Check the camera model, mount and exact lens mount variant; for APS-C models, also take the sensor format into account. |
If you want to keep using your existing camera body, the mount needs to be compatible. Around 29% of consumers put system compatibility first. |
| Framing you need |
Check the smallest detail you need to capture to see whether 1:1 is enough or you need greater magnification; also try framing the whole badge. |
If tiny lettering or embossed details are your main subject, the detail you can capture matters most. For the whole badge, the highest magnification isn’t automatically necessary. Around 29% of consumers prioritise detail framing. |
| Room for lighting |
Check the clear space in front of the front element at your chosen framing, as well as the positions of the camera, tripod and lights on your table. |
If the camera and lighting need to fit side by side in a confined space, the room in front of the lens is crucial. Around 21% of consumers are primarily concerned with having enough space for lighting. |
| Depth of field |
Check whether your specific camera supports focus bracketing. For stationary subjects, consider using a tripod and software to stack the images. |
If you want raised details at different depths to appear sharp, a single plane of focus may not be enough. Around 21% of consumers prioritise sharpness throughout the image. |
Common buying mistakes
-
Choosing based only on the word ‘macro’ or the highest magnification
You’ll need different framing for a whole badge and a tiny embossed detail. Higher magnification also means less depth of field at close range.
First decide how small the detail you want to capture is, then check whether your setup can also photograph the whole badge.
-
Confusing minimum focusing distance with the clear space in front of the lens
Minimum focusing distance alone doesn’t tell you how much space there is between the front element and the subject. Nikon Deutschland specifies a distance of around 5 cm from the subject at the closest focusing distance for the Z MC 50 mm.
Measure the space available in front of the front element at the framing you actually plan to use.
Depending on your setup, you may need to position the camera or lighting elsewhere.
-
Assuming image stabilisation means everything will be in focus
Stabilisation helps counter camera shake, but it doesn’t increase depth of field. In macro photography, the area in focus can be so small that raised details don’t look sharp at every depth.
For a stationary badge, you can use a stable setup and plan to focus stack. Check whether your specific camera supports the workflow you want to use.
Focus stacking takes extra time to capture the images and combine them.
Key lens brands
Nikon
For Nikon Z cameras, the shorter Z MC 50 mm 1:2,8 and the longer Z MC 105 mm 1:2,8 VR S are both macro options. Nikon Deutschland specifies a 1:1 magnification ratio for both.
- The 50 mm model is a shorter 1:1 option for capturing both the whole badge and its details.
- Nikon Deutschland specifies a distance of around 5 cm between the lens and subject at the closest focusing distance for the 50 mm model. Check whether there’s still room for lighting.
- The VR designation applies to the Z MC 105 mm 1:2,8 VR S; it doesn’t apply to every Nikon lens.
Sony
The FE 90 mm F2.8 Macro G OSS is a 1:1 macro option for compatible Sony E-mount cameras. Sony Deutschland specifies optical stabilisation.
- Sony Deutschland gives this model a minimum focusing distance of 0.28 m.
- Minimum focusing distance isn’t the same as the clear space in front of the front element. Sony Deutschland also lists a weight of 602 g.
Canon
The RF 100 mm F2.8L Macro IS USM is designed for compatible Canon RF cameras. Canon Deutschland specifies up to 1.4x magnification and optical stabilisation for this model.
- The higher magnification can be useful for capturing very small embossed details.
- Magnification beyond 1:1 isn’t automatically necessary for a whole-badge shot; the RF mount must be compatible with your camera.
Sigma
The 105 mm F2.8 DG DN MACRO | Art is a 1:1 option for mirrorless Sony E-mount or L-Mount cameras, in the correct mount variant.
- Sigma Deutschland specifies a focus limiter and a minimum focusing distance of 29.5 cm.
- The minimum focusing distance doesn’t indicate the clear space in front of the front element; check how much room your lighting needs in your own setup.
Laowa
Designed for APS-C cameras, the 65 mm f/2.8 2x Ultra Macro APO is a specialist option for very small details. Venus Optics lists several mount variants.
- Venus Optics specifies a maximum magnification of 2:1 and a minimum focusing distance of 17 cm.
- Maximum magnification isn’t a guide to framing the whole badge; also check that the mount variant is compatible with your camera.
Suitable products on Joybuy
Suitable products coming soon.
Frequently asked questions
Do I need a lens with more than 1:1 magnification to photograph a whole badge?
No, not just because of the subject. First decide on the framing you want: higher magnification is mainly useful for very small details, and reduces the area in focus at close range.
How can I get a raised badge sharp from front to back?
Set up your camera securely and check whether your camera model supports focus bracketing. If the badge is stationary, you can take pictures at different focus points and combine them using software.
What are my rights if a lens I bought online is faulty?
If you bought from a business seller, you can contact them about a fault; a voluntary manufacturer’s guarantee doesn’t replace your statutory rights. For goods bought in the EU, the European Union specifies a minimum of two years from receipt. According to the Verbraucherzentrale, online orders generally come with a 14-day right to cancel from delivery, although exceptions may apply. The right to cancel because you’ve changed your mind is different from the process for dealing with faulty goods.