Photographers with an existing camera system
If you’re looking for a lens for your existing camera, first check the exact mount and choose the right version. CHIP points out that a lens needs to be compatible with both the camera mount and sensor.
When choosing a macro lens for embroidered patches, first make sure it fits your camera mount, then think about the framing you’ll use most often: the whole patch or individual stitches. A shorter macro lens can make framing easier in a confined space, but at high magnification there may be little room in front of the lens. A longer macro lens may leave more space for lighting from the side, but you’ll need more room behind the camera. For capturing fine embroidery details, the stated reproduction ratio matters more than the word ‘macro’ alone.
If you’re looking for a lens for your existing camera, first check the exact mount and choose the right version. CHIP points out that a lens needs to be compatible with both the camera mount and sensor.
To take consistent full-patch and detail shots, your setup needs to fit the space available on your table. Nikon states that, at close range, there’s around 5 cm between the subject and the lens on the Z MC 50 mm. This can affect how you light your subject.
If you want to show individual stitches or threads at a large size, you’ll need to weigh the maximum reproduction ratio against the reduced depth of field at high magnification. Canon Academy describes this challenge for reproduction ratios approaching 1:1 and beyond.
The key question is whether your camera mount, the space on your table or the level of detail you want to capture will limit your setup.
| What matters | What to check before buying | Who is this important to? |
|---|---|---|
| Compatible camera mount | Check your exact camera model, mount and, where relevant, sensor format. CHIP stresses that the lens and camera system need to be compatible. | When choosing a lens for my existing camera body, I need to get the mount right before comparing focal length or magnification. Around 33% of consumers put mount compatibility first. |
| Room for the camera and lighting | Measure the possible distance between the camera and subject, and check how much clear space there is in front of the lens. Nikon states that, at close range, there’s around 5 cm between the lens and subject on the Z MC 50 mm. | On my small table, I need room for the camera and lighting from the side, without losing the patch from the frame. Around 27% of consumers prioritise this working space. |
| Magnifying individual stitches | Compare the maximum reproduction ratio of the specific version with the framing you want. At high magnification, accurate focusing becomes more important, as Canon Academy also points out. | If I want individual threads to be clearly visible in the image, I look at the reproduction ratio and sharpness across the area I want to show. Around 20% of consumers put these details first. |
| Capturing the whole patch | Check whether the entire patch will fit in the frame from the camera position available. The highest macro magnification isn’t automatically the deciding factor. | For my product photos, a complete, consistent view comes first; extreme magnification is secondary. Around 20% of consumers prioritise a full-patch view. |
The name alone doesn’t tell you how much a lens magnifies. Canon gives the RF 35mm F1.8 MACRO IS STM a maximum reproduction ratio of 1:2, while Nikon gives the Z MC 50 mm a ratio of 1:1. This difference can be crucial when choosing how to frame individual stitches.
Compare the stated maximum reproduction ratio of the exact version with the size of the details you want to show.
If a lens can’t capture the level of detail you want, you may need another lens for those shots.
The minimum focusing distance doesn’t tell you how much clear space there is in front of the lens. Nikon states that, for close-up shots with the Z MC 50 mm, there’s around 5 cm between the lens and subject. This may leave little room for lighting from the side.
Check how much space there is in front of the lens for the framing you actually want to shoot.
A longer lens may require more distance between the camera and subject. Whether the whole patch fits in the frame also depends on how much space you have behind the camera.
Measure the patch and the available camera distance before making maximum reproduction ratio your only selection criterion.
For Nikon Z cameras, Nikon offers, among other options, a shorter macro lens for full-patch views and 1:1 details, as well as a longer 1:1 option.
For EOS R cameras, Canon’s range includes, among other options, an RF lens with a 1:2 ratio and a macro lens with greater magnification.
The Sony FE 90 mm F2.8 Macro G OSS is an E-mount option for 1:1 detail, provided you have room to position the camera on your table.
According to Venus Optics, the Laowa 65mm f/2.8 2x Ultra Macro APO is designed for APS-C systems and higher-magnification photography.
No, not necessarily. What matters is whether the entire patch fits in the frame at a suitable size from the camera position available to you. A high maximum reproduction ratio is mainly useful for very small details. Start by taking a test shot with your existing lens.
Stabilise the camera, align it as closely as possible with the plane of the patch, and check the focus directly on the stitches. Canon Academy notes that depth of field drops significantly at reproduction ratios approaching 1:1 and beyond, so check that the entire area you want to show is in focus.
Distance contracts between consumers and businesses generally come with a right to cancel, subject to exceptions. The Verbraucherzentrale usually gives a 14-day period, which starts depending on the contract. If an item is faulty, you also have statutory rights against the seller. The European Union specifies a minimum two-year guarantee for goods from the date you receive them. The right to cancel and your rights regarding faulty goods are separate.