Which setup is right for you?

For photographing whole invitations

If you want to show the layout, paper and surroundings in a flat-lay shot, you’ll need the right composition and a stable camera position. Adobe describes a stable camera support as an important part of a flat-lay setup.

For photographing fine print details

If you want small lettering, embossing or paper texture to fill the frame, compare the maximum magnification of the specific lens. Canon Europe points out that focusing at close range needs to be precise because the depth of field is shallow.

For a compact window-light setup

If your camera, support and lighting need to fit into a small space above or beside the invitation, check the focal length and the clear space in front of the lens. The manufacturer’s minimum focus distance and the actual working distance are not the same thing.

What should you look for when choosing?

First decide whether you’ll mostly be photographing the whole invitation or small print details. Then check that the lens and setup suit your camera, lighting and available space.

What you need What to check before buying Who is this important for?
Keep the whole invitation sharp Test the composition and edge-to-edge sharpness with your existing lens; take the focal length and sensor format into account for the framing you want. If you want to show the entire card and its layout, first check whether your current setup is up to the job. Around 33% of consumers prioritise the overall view.
Show small lettering and print texture Compare the maximum magnification of the exact model; test how it focuses at close range on your subject. If you want to highlight fine lettering, embossing or paper texture, the possible magnification is key. Around 27% of consumers prioritise print details.
Check paper colours in window light Check the white balance on the printed paper; switch off any unnecessary additional light sources if possible. If you want the printed colours to look true to life in window light, check the existing room lighting too. Around 20% of consumers prioritise colour and lighting control.
Space for the camera, lens and lighting Measure the available working distance; distinguish between the minimum focus distance and the clear space in front of the lens, and check the mount. If your window or tabletop setup is short on space, the camera and lighting need to fit within the area available. Around 20% of consumers prioritise working space.

Common selection mistakes

  • Assuming every lens labelled “macro” offers the same magnification

    Maximum magnification varies between models. Canon quotes 0.5x for the RF 85 mm F2, while Nikon and Sony both specify 1:1 for the 50 mm models considered here.

    Compare the manufacturer’s specifications for the exact model with the size of the print detail you want to photograph.

  • Assuming the minimum focus distance is the clear space in front of the lens

    For the Z MC 50 mm, Nikon gives a minimum focus distance of 0.16 m, but the distance between the lens and subject is around 5 cm. The minimum focus distance therefore doesn’t tell you how much clear working space there is in front of the lens.

    Before buying, check the camera height and whether there’s enough room for window light.

  • Expecting a new lens to fix every colour cast

    Nikon points out that mixed light sources can make it harder to set the white balance; this isn’t just a question of which lens you use.

    Test the white balance on the printed paper and check any additional room lighting separately from your lens choice.

A guide to relevant lens brands

Nikon

Nikon describes the NIKKOR Z MC 50 mm f/2.8 as a 1:1 macro lens for Z cameras that’s also suitable for general photography.

  • Nikon Germany gives this model a minimum focus distance of 0.16 m, with around 5 cm between the lens and the subject.
  • The short distance in front of the lens can limit how you position window light; the camera must be compatible with the Z mount.

Sony

Sony lists the FE 50 mm F2.8 Macro SEL50M28 for E-mount cameras with full-frame and APS-C sensors.

  • Sony Germany specifies 1:1 magnification, a minimum focus distance of 0.16 m and a weight of 236 g for this model.
  • The lens specifications don’t list in-lens stabilisation; whether the camera has in-body stabilisation depends on the model.

Canon

Canon positions the RF 85 mm F2 MACRO IS STM as a lens for close-ups and portraits on EOS R cameras.

  • Canon Germany specifies a minimum focus distance of 35 cm and an image stabiliser.
  • Canon gives the maximum magnification as 0.5x, which isn’t the same as 1:1.

Sigma

According to the manufacturer, Sigma offers the 105 mm F2.8 DG DN Macro | Art for full-frame mirrorless cameras with a Sony E or L mount.

  • Sigma specifies a minimum focus distance of 29.5 cm and maximum magnification of 1:1.
  • Depending on the mount, Sigma gives the weight as 710 or 715 g. For a flat-lay shot of the whole card, you’ll need to position the camera further away.

Laowa

Laowa Germany’s macro lens range includes the 65 mm f/2.8 2X Ultra Macro APO for APS-C cameras.

  • The listed 2X magnification may be useful for capturing particularly small print details.
  • Check which mount version is compatible with your camera; the 2X specification doesn’t mean the lens is better for photographing a whole invitation.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens to photograph the whole invitation?

Not necessarily. First, check whether your existing lens can capture the composition you want with enough sharpness; 1:1 magnification is mainly useful for very small details.

How can I keep the lettering and paper sharp and their colours consistent in window light?

Stabilise the camera for the flat-lay shot, check the focus in a test photo and adjust the white balance. Nikon points out that mixed light sources can make it harder to set the white balance; switch off any unnecessary additional room lighting if possible.

What should I know about returns and faulty goods when buying a lens online?

When you buy remotely from a trader, you generally have a 14-day right to cancel from the date of delivery; exceptions and rules on return costs apply. According to the European Union’s Your Europe, faulty goods are also generally covered by a legal guarantee of at least two years from the seller. This is separate from any additional manufacturer’s warranty.