Who is a macro lens for medal photography for?

Collectors who value fine detail

If you want to capture small lettering, reliefs or signs of wear, consider magnification and depth of field together. Nikon describes focus stacking as a way to combine images taken at different points of focus.

Photographers using artificial lighting

When photographing shiny medals on a table, you’ll need room to position the camera, lights and diffusers. Canon Academy recommends using a tripod for macro photography wherever possible.

Occasional medal photographers

If you only photograph a medal now and then, first check whether your existing equipment can capture the framing you want. You may need a higher magnification ratio for a small engraving than for the whole medal.

What should you look for when choosing one?

First decide whether you want to focus on fine engravings or the whole medal. Then check the mount, the space you’ll need and the equipment you already have.

What to consider What to look for Who should pay particular attention?
Engraved details and depth of field Check the maximum magnification ratio of the exact model. For deeper relief, plan to use a tripod and, if needed, a focus stack. If I want to show lettering or individual marks at a large size, I need to balance magnification with sharpness across the depth of the subject. Around 31% of consumers put fine detail first.
Reflections and colour reproduction Check that you have room for light sources and diffusers. Test the white balance with the lights you’ll actually use. With shiny metal, I want to be able to control the lighting and reflections. Around 31% of consumers prioritise being able to control the lighting.
Space on the photography table Check the mount and sensor format against the specific lens version. Take the medal’s size, the framing and the available working distance into account. If table space and working distance are limited, the full setup, including the lighting, needs to fit in the space available. Around 19% of consumers put space requirements first.
Buying additional equipment Take a test shot with your existing lens at its closest focusing distance. Then weigh up the lens, tripod and lighting accessories together. If you mainly want to photograph a whole medal, you’ll want to avoid buying a lens you don’t need. Around 19% of consumers prioritise keeping additional costs down.

Common buying misconceptions

  • “At f/2.8, the whole medal will be sharp in low light”

    A wide aperture and high magnification mean a shallow area of sharp focus. Stopping down also reduces the amount of light reaching the sensor.

    Consider aperture, shutter speed and the depth of field you want together, rather than comparing only the widest aperture.

    A stable setup and, if needed, several shots at different focus points can mean extra work.

  • “A polarising filter removes reflections from medals”

    The examples of reducing reflections described by Canon Academy include reflective non-metallic surfaces. They don’t establish that a polarising filter will work reliably on polished medal metal.

    Start by considering how to diffuse the light and choose your shooting angle. Test a filter only with your specific setup.

    A filter may be an extra purchase without changing reflections on the medal in the way you want.

  • Confusing the minimum focusing distance with working distance

    The minimum focusing distance doesn’t directly tell you how much clear space there’ll be between the front of the lens and the medal. The space needed for the camera and lighting must suit the framing you want.

    Check the dimensions of your complete camera and lens setup at the magnification you plan to use.

    A cramped setup may mean adjusting the position of the photography table or lighting.

  • Choosing by brand instead of checking the mount

    Lenses in the same product range may be available with different mounts. A DSLR version and a mirrorless version aren’t automatically interchangeable.

    Check your exact camera model against the lens’s full mount specification.

    An incompatible mount could mean returning the lens or checking whether you need an additional adapter.

A guide to popular lens brands

Canon

The RF 100mm F2.8L Macro IS USM is an option for compatible EOS R cameras and for capturing small details at high magnification.

  • Canon Deutschland states a maximum magnification ratio of 1.4:1 and a minimum focusing distance of 0.26 m.
  • These manufacturer specifications don’t confirm a particular effect on reflections from metal or compatibility with other camera mounts.

Nikon

The NIKKOR Z MC 105 mm 1:2,8 VR S is a 1:1 macro option for compatible Nikon Z cameras.

  • Nikon lists image stabilisation and the option to focus manually.
  • Stabilisation doesn’t replace suitable lighting or checking whether you can achieve the depth of field you want.

Sony

The FE 90 mm F2.8 Macro G OSS is a macro lens for Sony E-mount, which Sony lists as a full-frame lens.

  • Sony lists optical stabilisation, a minimum focusing distance of 0.28 m and a weight of 602 g.
  • These specifications don’t tell you how much working space you’ll have or how much your complete camera setup will weigh.

Sigma

The 105mm F2.8 DG DN Macro | Art is a 1:1 option for compatible mirrorless cameras with a Sony E or L-mount.

  • Sigma lists a minimum focusing distance of 29.5 cm and a focus limiter.
  • Check each mount version separately. A manufacturer’s description of sharpness isn’t an independent performance comparison.

Tamron

The 90mm F/2.8 Di III MACRO VXD, model F072, is available in versions for Sony E and Nikon Z.

  • Tamron lists a magnification ratio of 1:1 and a minimum focusing distance of 0.23 m.
  • The advertised Flat-Field correction isn’t proof of an advantage for every medal. Choose the mount version that’s compatible with your camera.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Do I need 1:1 magnification to photograph the whole medal?

No, it depends on the framing you want. First check how large the medal appears on the sensor with your existing equipment. 1:1 or higher is mainly useful for smaller details.

How can I avoid harsh highlights and inaccurate colours under artificial light?

Try changing the position and diffusion of the light source, and check the white balance with the lights you’ll actually use. A polarising filter isn’t a guaranteed all-purpose solution for reflections on metal.

How can I keep both the relief and the edge sharp?

Keep the camera steady for consistent close-up shots and check how stopping down affects depth of field. If parts of the medal are at different distances, focus stacking may be an option. Whether your camera can do this automatically depends on the model.

How should I clean the front element after a photo session?

Sony recommends first removing dust from the lens surface with a blower. For heavier dirt, apply a suitable cleaner to a soft cloth rather than directly to the lens. Also follow the instructions for your model.