First, choose a lens with the right mount. For tiny painted details, a true magnification ratio of 1:1 or greater is useful, while a lower magnification may be enough for whole figures. By a window, working distance and camera position matter too, so the lens doesn’t block the light. With a shallow depth of field, a stable setup and, where appropriate, focus stacking can help; simply choosing a wide maximum aperture won’t do the job on its own.
Who should think carefully about their choice?
Photographers focusing on detail
If you want to show painted details or very small parts of a figure at a larger scale, consider the true magnification ratio and depth of field together. Canon Academy explains the particular demands of close-up macro photography.
Photographers using window light
If you’re photographing static figures without additional continuous lighting, a stable setup and a position that keeps the camera or lens from blocking the window light are important. Canon Academy highlights the risk of camera shake in macro photography.
Photographers short on space
If you want to photograph whole figures or scenes on a limited table surface, check the field of view and the clear space in front of the lens to make sure they suit your setup. Nikon states that at its closest focusing distance, the Z DX MC 35mm has a 7.2 cm gap between the lens and the subject.
What should you look for when buying?
First check that the lens is compatible with your camera. Then decide which framing and working distance will suit your figure and your spot by the window.
| Buying priority |
What to check |
Who it matters most to |
| Camera compatibility |
Check the camera model, mount, sensor format and exact lens mount variant. Don’t assume an adapter will be a suitable solution without checking first. |
When choosing a lens for my camera, I need to make sure the mount fits before comparing features or framing. Around 31% of consumers prioritise mount compatibility. |
| Magnifying small details |
Decide on the framing you want and check the actual maximum magnification of the specific model. Canon lists 1:2 for the RF 35mm and 1.4x for the RF 100mm. |
If I want eyes, paintwork or fine surface textures to appear large in the image, I need sufficient magnification. For around 31% of consumers, magnification for detail comes first. |
| Sharpness in window light |
Consider whether a stable setup and, if needed, focus stacking will work with your shooting process. A wide-open aperture alone won’t keep a three-dimensional figure sharp from front to back. |
In window light, I want to avoid camera shake and areas of the subject being out of focus. Around 23% of consumers prioritise stability and depth of field. |
| Framing and space |
Assess the clear space in front of the lens separately from its minimum focusing distance. Nikon states that at its closest focusing distance, the Z DX MC 35mm has a 7.2 cm gap between the lens and the subject. |
When space on the table is limited, I want to frame the whole figure with the background I want, while avoiding blocking the window light. Around 15% of consumers prioritise framing and the space a lens needs. |
Common buying mistakes
-
Assuming all “macro” lenses have the same magnification ratio
The name alone doesn’t tell you how large a detail will appear on the sensor. Canon lists a 1:2 ratio for the RF 35mm and 1.4x magnification for the RF 100mm; these figures apply to those specific models.
Compare the actual maximum magnification of the complete lens model with the framing you want for a typical figure.
If the chosen magnification doesn’t show the small details you want at a large enough size, you may need another lens later.
-
Confusing minimum focusing distance with clear working distance
Minimum focusing distance doesn’t automatically tell you how much clear space there is between the lens and the subject. For the Z DX MC 35mm, Nikon gives a minimum focusing distance of 16 cm and a 7.2 cm gap between the lens and the subject at the closest focusing point.
Check the actual working distance with your own setup, and make sure the lens or camera won’t block the window light from reaching the figure.
-
Thinking a wide maximum aperture guarantees a completely sharp figure
Depth of field is shallow in close-up photography. A wide aperture lets in more light, but it won’t automatically keep the whole three-dimensional figure sharp.
Test the aperture and focus on your subject. For static figures, a stable setup and focus stacking may be suitable; Nikon describes combining several shots taken with different focus points.
Focus stacking requires several shots and a suitable editing step afterwards.
-
Assuming your camera’s name tells you which lens mount to choose
Lens mounts vary, and the same lens may be available in several mount variants. So the mount variant must match your specific camera model.
Check the camera model, mount, sensor format and exact lens variant. If you’re buying online as a consumer, you should also check the specific returns policy.
Popular lens brands
Canon
Canon’s RF macro options range from the 35mm model, suited to close-ups and wider framing, to the RF 100mm for greater magnification of detail.
- Canon lists maximum magnification of 1.4x for the RF 100mm F2.8L Macro IS USM and a 1:2 ratio for the RF 35mm F1.8 MACRO IS STM.
- These figures apply to these models and the RF mount. For the RF 100mm at 1.0x magnification, Canon lists two stops of optical stabilisation under its own testing standards, despite a general figure of five stops.
Nikon
The Z-mount range includes macro lenses for different types of framing, including a 50mm model with 1:1 magnification and a shorter focal length DX model.
- Nikon lists a 1:1 ratio for the Z MC 50mm and up to 1:1 for the Z MC 105mm VR S.
- According to Nikon, the actual maximum magnification of the Z DX MC 35mm is 1:1.5. The 1:1 figure in full-frame or FX format refers to equivalent framing, not an actual 1:1 ratio on the DX sensor.
Sony
The FE 90mm F2.8 Macro G OSS is an E-mount option for 1:1 macro photography, with optical image stabilisation.
- Sony lists a 90 mm focal length, a minimum focusing distance of 0.28 m and maximum magnification of 1x for this model.
- Optical stabilisation doesn’t guarantee sharp shots in every window-light situation without a tripod. Minimum focusing distance also isn’t the same as the clear space in front of the front element.
Tamron
The 90mm F/2.8 Di III MACRO VXD, model F072, is available in Sony E and Nikon Z mount variants.
- Tamron lists a 1:1 ratio and a minimum focusing distance of 0.23 m for this model.
- Check the specific mount variant before buying. Manufacturer claims about sharpness, backlight performance or autofocus aren’t independent test results.
Sigma
The 105mm F2.8 DG DN Macro | Art is a 1:1 macro option with a short telephoto focal length, available for Sony E or L-mount.
- Sigma lists a minimum focusing distance of 29.5 cm and a 1:1 magnification ratio for this model.
- The teleconverters listed on the German product page are explicitly compatible with L-mount only; this compatibility doesn’t apply to the E-mount variant.
Lenses at Joybuy
Suitable products will be available soon.
Frequently asked questions
Do I need 1:1 magnification for a whole miniature figure?
No. What matters is how large you want the figure or detail to appear in your chosen framing. Canon lists a maximum magnification of 1:2 for the RF 35mm; for very small details, models with 1:1 magnification or higher offer greater maximum magnification.
How can I keep a miniature figure sharp from front to back in window light?
Set the static figure up securely and test the framing, aperture and focus on your subject. If one shot doesn’t give you enough depth of field, focus stacking followed by combining the shots may help; the process depends on your camera and editing workflow. Nikon describes this technique as taking several shots with different focus points.
Does image stabilisation replace a tripod for macro photography?
Not for every situation. Optical image stabilisation can reduce camera movement when shooting handheld, but it won’t increase the shallow depth of field. A stable setup is useful if you want consistent framing or plan to use focus stacking.
Is minimum focusing distance the same as the distance between the lens and the figure?
No. Minimum focusing distance and the clear space in front of the lens are different measurements. For the Z DX MC 35mm at its closest focusing point, Nikon lists a 7.2 cm gap between the lens and the subject; check the working distance of the specific model with your setup by the window.
How can I check whether a macro lens is compatible with my camera?
Check your exact camera model against the lens mount, sensor format and mount variant. Some models are available in several versions: for example, Tamron lists Sony E and Nikon Z variants for the 90mm F/2.8 Di III MACRO VXD.