Who is this selection for?

Detail photographers

You want to capture ridges and tiny shell structures in close-up, so you’ll need to balance magnification with focusing.

Photographers with limited space by the window

You’re arranging whole shells or close-up compositions in a small area, and weighing up lens size, distance from the subject and room for side lighting.

Owners of an existing camera system

You’re looking for a macro lens for your camera body and want to avoid mixing up mount options.

What should you look for when buying?

What you’re looking for What to check Who is this important for?
Compatible mount Check that the camera body, mount and full lens mount specification are compatible. If I’m looking for a lens for a camera body I already own, I check the exact mount first. Around 33% of shoppers put mount compatibility first.
Magnification ratio Check the maximum magnification of the specific model and decide whether you want a full-shell shot or to capture tiny details. If I want fine ridges to appear as large as possible, magnification matters more than simply having “macro” in the name. Around 27% of shoppers prioritise the size of the details in the image.
Sharpness in window light Check whether the camera and subject can be kept steady, and whether you can capture and combine several focus planes if needed. If I want a curved shell to appear sharp across several planes, I plan a stable setup and, if necessary, a focus stack. Around 20% of shoppers have this priority.
Working distance and lighting Measure the available setup space and allow for the clear space in front of the lens at your chosen magnification. With limited space by the window, I want to arrange the camera, shell and side lighting without the lens casting a shadow over the light. Around 20% of shoppers prioritise this working space.

Common buying misconceptions

  • “Macro” in the name automatically means the magnification is right for you

    Manufacturer specifications for the lenses covered here range from 1:1 to 2:1. Lower magnification may be enough for a whole shell, while a higher ratio can make all the difference when capturing tiny details.

    Compare the maximum magnification of the exact model with the framing you want.

    If it can’t achieve the framing you want, you may need a different lens or additional accessories.

  • Confusing the minimum focusing distance with the clear space in front of the lens

    The minimum focusing distance may be measured from the sensor plane, so it doesn’t tell you on its own how much space there is between the lens and the shell. Fujifilm lists 10 cm from the sensor plane for the XF30mm; Nikon also gives a working distance of around 5 cm between the lens and subject for the Z MC 50mm.

    Check the working distance at your chosen magnification and try setting up the camera and shell by the window.

    An awkward setup may mean you need to change the lighting or choose a different lens.

  • Assuming image stabilisation will keep everything in focus

    Stabilisation and depth of field solve different problems. A curved shell may need several focus planes, even if camera movement is reduced.

    If needed, plan a stable setup and a focus stack rather than treating image stabilisation as a substitute for precise focusing.

    A tripod, shots taken at different focus points and combining them can all add time to setup and editing.

Key brands to consider

Canon

The RF 100mm F2.8L Macro IS USM is an option for Canon RF camera bodies if you’re looking for high magnification.

  • Canon gives this lens a maximum magnification of 1.4:1 and optical image stabilisation.
  • The five stops quoted by Canon don’t apply across the board at close range: at 1.0x magnification, Canon reports two stops based on its own test standard.

Fujifilm

Within the X system, you can compare the XF30mmF2.8 R LM WR Macro and the XF80mmF2.8 R LM OIS WR Macro for different setups.

  • Fujifilm gives both lenses a magnification ratio of 1:1.
  • For the XF30mm, Fujifilm lists a minimum focusing distance of 10 cm from the sensor plane. According to Fujifilm, the XF80mm weighs around 750 g and needs room in your setup.

Tamron

According to Tamron, the 90mm F/2.8 Di III MACRO VXD is available as a 1:1 macro lens for Sony E and Nikon Z; make sure the mount version matches your camera body.

  • Tamron lists a minimum focusing distance of 0.23 m.
  • According to Tamron, the lens weighs 630 g for Sony E or 640 g for Nikon Z.

Nikon

According to Nikon, the NIKKOR Z MC 50mm f/2.8 combines 1:1 close-up photography with a standard angle of view.

  • Nikon gives a minimum focusing distance of 0.16 m.
  • At this minimum focusing distance, there’s around 5 cm between the lens and subject, according to Nikon. The stabilisation Nikon mentions is in the camera, not a stabiliser built into the lens.

Laowa

Designed for APS-C, the Laowa 65mm f/2.8 2x Ultra Macro APO is worth considering for capturing very small details at up to 2:1.

  • Venus Optics lists a minimum focusing distance of 17 cm.
  • Venus Optics offers several mount options. Before buying, check the exact version and make sure its controls suit you.

Related products

Related products will be available soon.

Frequently asked questions

Do I definitely need 2:1 magnification for a whole shell?

No, you don’t necessarily need 2:1 magnification for a whole shell. Decide on the framing you want first, then check the maximum magnification required: the lenses listed have ratios of 1:1, 1.4:1 and 2:1.

How can I keep a curved shell sharp throughout in window light?

Keep the stationary shell and camera steady, and focus carefully. If one shot doesn’t capture all the planes you want in focus, you can combine images taken at different focus points; Nikon describes this technique as focus stacking.

What should I know about returns before buying online?

For standard distance contracts with consumers, there is generally a statutory right to cancel. The German Federal Ministry of Justice states in § 355 BGB that the cancellation period is 14 days; § 312g BGB lists exceptions. The right to cancel a contract for another reason is separate from claims relating to faulty goods.