Who photographs circuit boards?

Documenting circuit boards

If you want to photograph larger, mostly flat areas of a circuit board, including the edges, framing and a stable setup are key. Nikon Germany and Fujifilm specify short subject distances for certain 1:1 macro lenses, which you’ll need to take into account when planning your setup.

Photographing solder joints

For small components and solder joints, consider magnification, working distance and space for lighting together. Sony Germany specifies a working distance of around 13 cm for the SEL90M28G at its minimum focus distance.

Working with limited desk space

If there’s only room for your camera and lights on a small surface, the available height matters just as much as the focal length. The clear space in front of the lens can differ considerably from the minimum focus distance when shooting close-ups.

What should you look for when buying?

First check the camera mount, then decide on your desired framing. Finally, measure the space available on your desk for the camera, subject and lighting.

What matters What to check before buying Who should pay particular attention?
Camera mount Check the full mount and the exact lens version against your camera. If I want to use the lens directly with my existing camera, I check the mount first; around 31% of consumers put camera compatibility first.
Angle of view and magnification Match the size of the circuit board, sensor format and available shooting distance to the framing you want. If you’re deciding between a shot of the whole board and highly magnified details, work out which you need before choosing. Around 25% of consumers prioritise framing or level of detail.
Working distance and lighting Check the distance in front of the front element at the magnification you need, as well as the space available for lighting. If your camera, circuit board and lights all need to fit on a small desk, the actual clear space in front of the lens matters; around 25% of consumers put space for their setup and lighting first.
Depth of field and stability Plan for a stable camera position and enough light to achieve the focus you want. When photographing components of different heights, I want to keep the important plane in focus despite the limited depth of field. Around 19% of consumers prioritise even sharpness and a setup that minimises camera shake.

Common misconceptions

  • Confusing minimum focus distance with clear space in front of the lens

    Minimum focus distance doesn’t tell you how much clear space there is between the front element and your subject. Sony specifies a working distance of around 13 cm for the SEL90M28G, despite its minimum focus distance of 28 cm.

    Check the distance from the front element for the close-up you want, and measure the space behind the camera too.

  • Choosing the highest magnification for every circuit board photo

    A higher maximum magnification is most useful for small details. For a shot of the whole board, framing and available setup height matter too.

    Before choosing, decide whether the whole board or an individual component is your main subject.

  • Relying on a narrow aperture or image stabilisation instead of good lighting and a steady setup

    Macro photography has a limited depth of field. Stopping down can increase it, but you’ll need more light or a longer exposure.

    Plan for a stable camera position and check how the light falls across your actual desk setup.

Key brands at a glance

Nikon

The NIKKOR Z MC 50 mm 1:2,8 is a 1:1 macro lens for compatible Nikon Z cameras.

  • Nikon Germany specifies a distance of around 5 cm between the lens and subject when using this model at close range.
  • The limited space in front of the front element can make it harder to position lighting on a small desk.

Canon

The RF 24mm F1.8 MACRO IS STM and RF 100mm F2.8L Macro IS USM offer different angles of view and magnifications for compatible EOS R cameras.

  • Canon specifies a maximum magnification of 0.5x for the RF 24mm and 1.4x for the RF 100mm.
  • The RF 100mm’s higher magnification doesn’t automatically mean it’s better suited to fitting the whole board into the frame on a small desk.

Sony

The FE 90mm F2.8 Macro G OSS, model SEL90M28G, is a 1:1 macro lens for Sony E-mount cameras.

  • For this exact model, Sony Germany specifies a working distance of around 13 cm at its minimum focus distance of 28 cm.
  • The framing you need and the space available behind the camera must both suit your desk setup.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available with Sony E and L-Mount fittings and offers 1:1 magnification.

  • Choosing between the mount options can be useful if you have a compatible Sony E or L-Mount camera.
  • Check the space behind your camera, and don’t confuse the minimum focus distance with the clear space in front of the front element.

Tamron

The 90mm F/2.8 Di III MACRO VXD, model F072, is available for Sony E and Nikon Z and is described by Tamron as a 1:1 macro lens.

  • Tamron lists flat-field correction for flat subjects and sharpness right to the edges as product features.
  • These are manufacturer claims, not an independent comparison. Make sure the mount option is compatible with your camera.

Fujifilm

The FUJINON XF30mmF2.8 R LM WR Macro is a 1:1 macro lens for Fujifilm X cameras.

  • Fujifilm specifies a minimum focus distance of 10 cm.
  • According to Fujifilm, subjects can come very close to touching the front element at this distance, which can make lighting more difficult.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is a macro lens for Micro Four Thirds cameras.

  • OM SYSTEM specifies a native 2x magnification.
  • The quoted 4x magnification is a 35mm-equivalent figure. Even with high magnification, your framing and available setup space still need to work.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is a ‘Macro’ label enough to take close-up photos of small solder joints?

No. Compare the maximum reproduction ratio of the specific model with the framing you want. For example, Canon specifies a maximum magnification of 0.5x for the RF 24mm and 1.4x for the RF 100mm.

How do I set up my camera to take sharp photos of circuit boards?

Keep the camera as steady as possible and, if the circuit board is flat, position it as parallel as you can to the plane you want in focus. Macro photography has a shallower depth of field; stopping down can increase it, but you’ll need more light or a longer exposure. Components at different heights may still fall outside the focus plane you’ve chosen.

What additional costs and consumer rights should I consider when buying online in Germany?

Check whether your setup needs an additional camera mount or lighting. If goods are faulty, statutory consumer rights are separate from a voluntary manufacturer’s guarantee, as explained by the Verbraucherzentrale. Consumers generally have a right to cancel distance contracts, subject to statutory exceptions: the Federal Ministry of Justice and the Federal Office of Justice state in section 355 of the German Civil Code (BGB) that the cancellation period is 14 days; the exceptions in section 312g BGB also apply.