Who is this choice relevant to?

Photographing tiny solder joints

If you want individual contacts, labels or fault areas to be clearly visible, the magnification and composition need to suit the smallest detail that matters. Canon, Sony and Laowa list different maximum magnifications for specific macro lens models.

Documenting entire circuit boards

For consistent overviews, you need a suitable frame and a stable camera position. Canon describes a tripod as a way to achieve consistent product shots, while Nikon explains focus stacking as a way to increase depth of field in macro photography.

Photographing by a window

If you don’t have a dedicated studio, plan for the space you’ll need to position your lighting and for the distance between the lens and the circuit board. Nikon and Sony distinguish between the minimum focusing distance and the distance to the subject at the closest focusing point in their macro specifications.

What should you consider when buying?

For circuit board photography in window light, your choice will depend mainly on the composition you want, the space available for lighting and your camera mount.

Buying criterion What to check Who will find this most important?
Small details Check the maximum magnification of the specific model and distinguish between 0.5x, 1:1 and 2:1. If you want to show individual solder joints or labels at a large size, the magnification needs to suit the smallest detail; around 31% of consumers put tiny circuit board details first.
Full-board view Consider the overall composition you need, the edges of the frame and a stable camera position. If you’re documenting several components or the entire board, getting the full composition right matters more than the highest possible magnification; around 25% of consumers prioritise complete circuit board overviews.
Window light Check the working distance from the front of the lens, not just the minimum focusing distance; allow space to position light from the side. If you’re photographing by a window, you’ll need room to position the light and manage reflections caused by your setup; around 25% of consumers prioritise lighting by a window.
Camera mount Check that the exact camera model, mount and controls match the specific lens version. If you want to keep using your existing camera, first check the mount and controls for the version you’re considering; around 19% of consumers prioritise compatibility with their camera.

Common selection mistakes

  • Confusing the minimum focusing distance with the clearance in front of the lens

    For the NIKKOR Z MC 50 mm 1:2,8, Nikon specifies a distance of around 5 cm between the lens and subject at the closest focusing point. The minimum focusing distance refers to a different measurement.

    Check the usable distance from your intended shooting position, and allow for the space you’ll need to position lighting or a flag.

  • Assuming ‘macro’ automatically means 1:1

    Canon lists a maximum magnification of 0.5x for the RF 85mm F2 MACRO IS STM, while other models listed here reach 1:1 or more. The label alone doesn’t tell you how large a small area will appear in the image.

    Compare the stated maximum magnification with the smallest detail you want to photograph.

  • Judging a close-up lens by the centre of the image alone

    Canon explains that, with flat subjects, there can be differences between single-element and double-element close-up lenses right to the edges of the frame.

    If the circuit board fills a large part of the frame, check how it looks at the edges too. If the result isn’t good enough, you may need a different close-up lens or another lens altogether.

  • Expecting the lens alone to deliver sharp images throughout, with few reflections

    Higher magnification won’t eliminate reflections or increase depth of field. Canon treats a stable camera position and lighting as separate steps; Nikon describes focus stacking using images taken at different focus points.

    Plan your lighting and approach to focus as well as your lens choice, especially when photographing components of different heights.

    A stable position, adjusted lighting or a focus stack may require additional setup.

Notable lens brands to consider

Nikon

For Nikon Z cameras, Nikon offers, among other options, a 50 mm 1:1 macro lens and a 105 mm 1:1 macro lens.

  • Nikon specifies a distance of around 5 cm between the lens and subject at the closest focusing point for the Z MC 50 mm 1:2,8.
  • This short distance can limit the space available for side lighting from a window; the specification applies to this model.

Sony

According to Sony, the FE 90 mm F2.8 Macro G OSS is a 1:1 macro lens for Sony E-mount cameras.

  • Sony lists optical stabilisation and a minimum focusing distance of 0.28 m for this model.
  • The minimum focusing distance is not the same as the distance between the front of the lens and the circuit board.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is a 1:1 macro lens for full-frame mirrorless cameras.

  • Sigma lists a minimum focusing distance of 29.5 cm and a focus limiter.
  • The model is available with Sony E-mount and L-Mount; the versions are not interchangeable.

Canon

For compatible EOS R cameras, Canon lists the RF 85mm F2 MACRO IS STM with 0.5x magnification and the RF 100mm F2.8L Macro IS USM with up to 1.4x magnification.

  • The two models offer different maximum magnifications to suit different compositions.
  • Canon’s stabilisation figures for the RF 100 mm are based on its test conditions, particularly at 1:1.

Laowa

Laowa specifies up to 2:1 magnification for the 100mm f/2.8 2x Ultra Macro APO.

  • This stated magnification is suited to photographing very small structures.
  • According to Laowa, the aperture is controlled via the camera on the Canon-EF version; operation is manual for the other listed mounts.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens to photograph an entire circuit board?

No. What matters is whether the area of the board you need fits within the available frame. A lens with a maximum magnification of 0.5x may be enough for wider views; a higher magnification can be useful for very small details.

How can I make photos of the same circuit board comparable when the window light changes?

Keep the camera and circuit board in fixed positions if possible, and adjust the lighting separately. Canon describes using a tripod to help keep composition consistent. If components of different heights can’t all be kept in focus at once, you could take a series of images for focus stacking, as described by Nikon.

Is the minimum focusing distance the distance between the lens and the circuit board?

No, it is not the same as the clear space between the front of the lens and the subject. For the Z MC 50 mm 1:2,8, Nikon specifies a distance of around 5 cm between the lens and subject at the closest focusing point; check how much space you’ll actually have for your lighting setup.

What statutory rights apply when buying a lens online?

For a qualifying distance sale from a trader, you generally have 14 days from delivery to cancel; exceptions and the applicable rules on return costs should be taken into account. According to Your Europe, EU law gives you a legal guarantee of at least two years from receipt for faulty goods, with the seller responsible. A voluntary manufacturer’s guarantee does not replace these rights.