Who is this lens comparison for?

Photographing small component details

To make labels or fine textures fill more of the frame, you need the right combination of maximum magnification and precise focusing. Canon lists different magnifications for its macro lenses, while Canon and Nikon also point out that focusing at close range can be challenging.

Photographing with tabletop lighting

If you place lamps or diffusers close to the component, allow for the available space in front of the lens when choosing your framing. Nikon states that, at its closest focusing distance, the NIKKOR Z MC 50 mm leaves around 5 cm between the lens and the subject.

Photographing complete assemblies

For larger parts or components at different heights, framing and a stable setup matter, and you may need to use several focus planes. Canon recommends a tripod for consistent product shots. Nikon and Adobe describe focus stacking as a way to combine images taken at different focus points.

What should you look for when buying?

Start by checking the lens mount and the magnification you need. Then make sure there’s enough room for your lighting. If you’re photographing an assembly with components at different heights, factor in the extra work involved in shooting and editing, too.

What you need What to check before buying Who it matters most to
Making tiny details appear larger Compare the maximum magnification of the specific model with the framing needed for your smallest component. If I want labels or fine textures to appear as large as possible, the lens’s magnification is the key factor. Around 28% of consumers put magnifying details at the top of their list.
Room for lighting Check the working distance between the lens and subject for your chosen framing. This isn’t the same as the minimum focusing distance. If I want to use diffusers right next to the component, there needs to be enough room in front of the lens to position the light. Around 22% of consumers prioritise this working distance.
Compatible camera system Check the camera model and mount against the exact lens version on offer. Pay particular attention to the mount when comparing variants. If I want to keep using my existing camera body, the lens version needs to be an exact fit. Around 22% of consumers prioritise compatibility with their camera system.
Sharpness across different heights Check the key focus planes in a test shot. If needed, plan to take several images and combine them afterwards. If I want several heights of a stationary assembly to appear sharp, I need to consider the shooting and editing process as well as the lens. Around 17% of consumers prioritise sharpness across the depth of the assembly.
White background and accurate colours Check the light distribution, shadows and white balance under the lighting you’ll actually use. If I need consistent photos with a white background and accurate component colours, the lighting and camera settings matter, too. Around 11% of consumers prioritise this shooting setup.

Common pitfalls

  • Assuming ‘Macro’ automatically means 1:1

    Maximum magnification varies even between lenses from the same brand. Canon lists a maximum magnification of 0.5x for the RF 85mm F2 MACRO IS STM and up to 1.4x for the RF 100mm F2.8L Macro IS USM.

    Compare the stated magnification of the exact model with the framing you need for your smallest component.

  • Confusing minimum focusing distance with room for lighting

    For the NIKKOR Z MC 50 mm 1:2.8, Nikon lists a minimum focusing distance of 0.16 m and around 5 cm between the lens and subject at that setting. This can leave little room for a diffuser.

    Check the available space using your chosen framing and planned lighting setup.

    Depending on your setup, you may need to adjust the lighting or move the diffuser.

  • Expecting the lens alone to deliver sharp images and a white background

    Depth of field is shallow at close range. Lighting, shadows and white balance also affect how the background and component colours look.

    Test the focus, lighting and white balance on a representative component before settling on your setup. For stationary parts at different heights, focus stacking may be an option: take several shots and combine them afterwards.

    Focus stacking means taking extra shots and adding another step to the editing process.

Brands and macro options to consider

Canon

For compatible EOS R cameras, Canon lists magnification of up to 1.4x for the RF 100mm F2.8L Macro IS USM and a maximum of 0.5x for the RF 85mm F2 MACRO IS STM.

  • The two models offer different maximum magnifications to suit different framing needs.
  • These specifications apply to the models listed and compatible cameras; they don’t apply to every Canon lens.

Nikon

Nikon lists a 1:1 magnification ratio for both the Z MC 105 mm 1:2.8 VR S and the Z MC 50 mm 1:2.8.

  • Nikon lists in-lens image stabilisation for the 105 mm model.
  • At the 50 mm model’s minimum focusing distance, Nikon states that the gap between the lens and subject is around 5 cm. Make sure you leave enough room for lighting.

Sony

According to Sony, the FE 90 mm F2.8 Macro G OSS is a 1:1 macro option for Sony E-mount cameras.

  • Sony lists optical stabilisation and a minimum focusing distance of 0.28 m.
  • The minimum focusing distance is not the same as the clear space in front of the front element.

Sigma

According to Sigma, the Sigma 105mm F2.8 DG DN Macro | Art is available with 1:1 magnification for Sony E-mount and L-mount cameras.

  • Sigma lists a minimum focusing distance of 29.5 cm and a focus limiter.
  • Choose the mount that matches your camera body. The splash resistance described by the manufacturer doesn’t mean the lens is waterproof.

OM SYSTEM

According to OM SYSTEM, the M.Zuiko Digital ED 60mm F2.8 Macro is a 1:1 macro option for the corresponding Micro Four Thirds system.

  • OM SYSTEM lists a minimum focusing distance of 0.19 m and a weight of 185 g.
  • The stated 2x magnification is a 35 mm equivalent, not an optical magnification ratio of 2:1.

Joybuy products

Related products coming soon.

Frequently asked questions

Is a lens labelled ‘Macro’ enough for tiny labels?

Not necessarily. Compare the maximum magnification of the specific model with the framing you need. Canon lists a maximum magnification of 0.5x for the RF 85mm F2 MACRO IS STM and up to 1.4x for the RF 100mm F2.8L Macro IS USM.

How can I set up consistent photos against a white background?

Secure the camera to keep the framing consistent, check the shadows and light distribution in a test shot, and set the white balance to match your lighting. A white surface alone won’t guarantee a neutral white image.

How can I keep components at different heights in focus?

First, check the focus plane in a test shot. With a stationary setup, you can combine several shots taken at different focus points. Focus stacking increases the apparent depth of field, but it requires extra shots and editing.

Who is responsible if a product is faulty, and do I need an extended warranty?

If you buy as a consumer from a trader, you have statutory rights against the seller if the product is faulty. According to information from the European Union, the minimum period is two years from receipt of the goods. A commercial guarantee offered voluntarily may provide additional benefits, but it doesn’t replace or reduce your statutory rights.

Can I cancel an online lens purchase in Germany?

For a standard online purchase as a consumer from a trader, you generally have a 14-day right to cancel from the date of delivery; exceptions and conditions apply. According to information from the European Union, the buyer pays the return costs unless the seller agrees to cover them or failed to provide the required information before the purchase. This right to cancel doesn’t apply to purchases from private individuals.