Choosing a macro lens for your needs

For documenting fine details

If you want to show veneer marks, lettering or traces of restoration up close, match your intended framing to the maximum magnification of the specific lens. Canon Academy explains that depth of field is shallower in macro photography than when shooting from further away.

For photographers setting up lighting

If you want to position light to the side of, or diffuse light in front of, a lacquered cabinet, check the clearance between the lens and your subject. Nikon Germany gives a working distance of around 5 cm from the subject for the NIKKOR Z MC 50mm at its minimum focusing distance; Sigma Corporation specifies a working distance of 141 mm at 1:1 for the 105mm F2.8 DG DN MACRO | Art.

For cabinet and detail photography

If you want to use one lens for both small details and larger areas of a cabinet, weigh the framing you need against the space available for your camera position. Nikon Germany also describes the Z MC 50mm as suitable for general subjects; longer macro lenses may require you to stand further back to get the same wider framing.

What to look for when buying

Start with the smallest detail you want to photograph and a lens mount that fits your camera. Then check whether you have room for lighting and wider shots. Plan for reflections and depth of field separately.

What you need What to check when buying Who it matters most to
Show small details up close Compare the maximum magnification of the specific model and make sure the mount is compatible. Canon Germany specifies 0.5x magnification for the RF 85mm F2 MACRO IS STM and 1.4x for the RF 100mm F2.8L Macro IS USM. If I want to show fine veneer marks or lettering clearly, I first check how large they’ll appear on the sensor. Around 33% of consumers prioritise close-up detail.
Leave room for lighting Check the working distance at the magnification you need; the minimum focusing distance is not necessarily the distance between the lens and the subject. Nikon Germany gives a working distance of around 5 cm at close range for the Z MC 50mm; Sigma Corporation specifies 141 mm at 1:1 for the 105mm F2.8 DG DN MACRO | Art. If I want to position a light to the side of the cabinet, I need enough space between the lens and the subject. Around 27% of consumers prioritise this clearance for lighting.
Photograph larger areas of a cabinet Check the angle of view and the camera position needed to achieve your intended framing. Nikon Germany also describes the Z MC 50mm as suitable for general subjects. If I want to photograph larger areas as well as details with the same lens, I check whether I have room to stand far enough back. Around 20% of consumers put wider shots first.
Control reflections and focus Plan your lighting angles and, if needed, choose a polarising filter that fits the filter thread. Canon Academy notes that a polarising filter can reduce reflections but may cost up to two stops of light. With glossy paint or curved details, I want to control reflections and depth of field. Around 20% of consumers prioritise this.

Avoiding common buying pitfalls

  • Assuming “Macro” means 1:1

    The name alone doesn’t tell you the lens’s maximum magnification. Canon specifies 0.5x for the RF 85mm F2 MACRO IS STM and 1.4x for the RF 100mm F2.8L Macro IS USM.

    Compare the maximum magnification of the complete model name with the smallest detail you want to photograph.

    If the magnification isn’t enough for very small details, you may need another lens.

  • Assuming the minimum focusing distance leaves room for lighting

    The minimum focusing distance doesn’t necessarily tell you how much space there’ll be between the lens and your subject. For the Nikon Z MC 50mm, Nikon Germany gives a working distance of around 5 cm at the minimum focusing distance.

    Check the working distance at the magnification you’ll actually use, and factor in where you’ll position your light source.

  • Confusing stabilisation with sufficient depth of field or reflection control

    Stabilisation helps prevent camera shake, but depth of field remains shallow at close range, and lacquered surfaces can reflect light. These require separate decisions about focusing and lighting.

    Plan for depth of field and lighting independently of the specific lens’s stabilisation.

    Depending on your setup, you may need a tripod, a light modifier or a suitable polarising filter.

Key brands at a glance

Canon

Canon offers RF close-up and macro lenses for compatible EOS R cameras.

  • Canon Germany specifies maximum magnification of 0.5x for the RF 85mm F2 MACRO IS STM and 1.4x for the RF 100mm F2.8L Macro IS USM.
  • These figures apply to the respective models; according to Canon, the RF 85mm does not offer 1:1 magnification.

Nikon

Nikon offers Z macro lenses in 50mm and 105mm focal lengths, for different framings and working distances.

  • Nikon Germany specifies magnification of up to 1:1 for both models; the Z MC 105mm f/2.8 VR S also features in-lens stabilisation.
  • According to Nikon, there’s around 5 cm between the Z MC 50mm and the subject at its minimum focusing distance, which may limit the room available for lighting.

Sony

The FE 90mm F2.8 Macro G OSS (SEL90M28G) offers 1:1 magnification for compatible Sony E-mount cameras.

  • Sony Germany specifies optical stabilisation and a minimum focusing distance of 0.28 m.
  • The 0.28 m figure is not specified as the working distance in front of the lens.

Sigma

The 105mm F2.8 DG DN MACRO | Art is a 1:1 telephoto macro lens, available in the L-mount and Sony E-mount versions specified by the manufacturer.

  • Sigma Corporation specifies a working distance of 141 mm at 1:1, which is worth considering when planning lighting in front of the cabinet.
  • The available mount options do not confirm compatibility with other mounts.

Tamron

The 90mm F/2.8 Di III MACRO VXD offers 1:1 magnification in the Sony E-mount and Nikon Z-mount versions specified by the manufacturer.

  • Tamron lists weights of 630 g and 640 g for the respective versions.
  • Make sure the mount version matches your camera.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Is a lens with “Macro” in its name enough for tiny lettering or repair marks?

Not necessarily: the key factor is the maximum magnification of the specific model. Canon Germany specifies a maximum of 0.5x for the RF 85mm F2 MACRO IS STM and 1.4x for the RF 100mm F2.8L Macro IS USM. Compare these figures with the framing you want, and check that the mount fits your camera.

How can I keep a curved area of the cabinet sharp throughout?

Depth of field is shallow in close-up photography. Stopping down can increase it, but lets in less light. If your subject isn’t moving, you could also use a sturdy tripod and take several shots focused at different distances. Check which features your camera system offers to help with this. Canon Academy and Nikon Germany discuss shallow depth of field and focus stacking as photographic techniques.

How can I reduce reflections on restored lacquer?

First, try changing the direction and size of your light source. A suitably sized, rotating polarising filter can reduce reflections on lacquered surfaces. Its effect depends on the angle, and according to Canon Academy it can cost up to two stops of light. It’s an option for your lighting setup, not a guaranteed feature of a macro lens.

What return and warranty rights apply when buying online in Germany?

For online purchases that are generally eligible for cancellation, Your Europe, the European Union’s consumer information service, states that you have a 14-day cancellation period. If goods are faulty, you generally have a statutory guarantee of at least two years from the seller. This is separate from any voluntary manufacturer’s warranty; exceptions may apply to the right to cancel.