Which option is right for you?

Miniature painters photographing fine details

If you want tiny painted details or pieces of equipment to fill the frame, compare the maximum reproduction ratio and make sure the lens fits your camera’s mount. Specifications from Canon, Nikon and Sony show that the magnification you can achieve varies by model.

Photographers capturing whole figures

You don’t automatically need a high magnification ratio to photograph a complete silhouette against white. What matters is whether the lens can focus on your chosen framing from the distance available. Focus stacking can help with three-dimensional figures; Canon Europe describes this technique as combining several shots taken at slightly different focus distances.

Photographers working at a small studio table

If you need room for side lighting or a diffuser as well as your camera and figure, check the working distance of the specific lens. Nikon Germany gives a working distance of around 5 cm for the Z MC 50 mm at its closest focusing distance, while Sony Germany gives around 13 cm for the SEL90M28G. These figures apply to the named models at their closest focusing distance.

What should you look for when buying?

What you need What to check before buying Who is this especially important for?
Fine painted details Check the mount and maximum reproduction ratio of the exact model. If I want to show small details at a large size, magnification takes priority over the overall view. Around 28% of consumers are likely to put reproduction ratio first.
The whole figure in the frame Check the focal length, sensor format and available distance for your chosen framing. If I want to photograph a complete figure against white with the framing I have in mind, the right composition matters more than maximum magnification. For around 22% of consumers, the overall view is likely to be the main priority.
Sharpness across the depth of the figure Plan your aperture and lighting needs together; check for focus stacking and make sure you have a stable setup. If I want the face, equipment and base to appear sharp at the same time, I need a stable setup as well as a suitable lens. Around 22% of consumers are likely to prioritise sharpness across the whole figure.
Room for lighting Check the working distance from the front of the lens to the subject, and plan separate lighting for the background and subject. If I need space for side lighting or a diffuser on a small table, the clearance in front of the lens is crucial. For around 17% of consumers, space for lighting is likely to be the main priority.
Photographing other subjects Check that the reproduction ratio and focal length suit the subjects you’ll photograph beyond miniatures. If I want to use the lens for other subjects too, the right combination of framing and intended use matters. Around 11% of consumers are likely to consider versatility especially important.

Common buying mistakes

  • Assuming ‘macro’ means 1:1

    The label alone doesn’t tell you what reproduction ratio a specific model can achieve. Canon gives a maximum magnification of 0.5x for the RF 85mm F2 MACRO IS STM and 1.4x for the RF 100mm F2.8L Macro IS USM.

    Compare the maximum reproduction ratio for the exact model with the size of the detail you want to photograph.

  • Confusing minimum focusing distance with the space in front of the lens

    Minimum focusing distance and working distance aren’t the same thing. The room available for side lighting or a diffuser depends on the specific lens and shooting distance.

    Measure the space on your studio table and check the model’s working distance rather than relying on its minimum focusing distance alone.

  • Buying extra magnification to solve every problem

    Maximum reproduction ratio doesn’t determine the depth of field across a three-dimensional figure or how bright the white background will look.

    Plan figure sharpness and background lighting separately from the lens’s magnification. Focus stacking may be an option if you need several planes in focus; a white image requires suitable lighting.

Lens brands at a glance

Canon

RF close-up options with different maximum reproduction ratios.

  • Canon gives a maximum magnification of 0.5x for the RF 85mm F2 MACRO IS STM and 1.4x for the RF 100mm F2.8L Macro IS USM.
  • The RF 85mm doesn’t reach 1:1; higher magnification won’t automatically solve the depth-of-field challenges of a three-dimensional figure.

Nikon

Z macro lenses with 50 mm and 105 mm focal lengths.

  • Nikon gives a maximum magnification of 1:1 for both the Z MC 50 mm 1:2.8 and the Z MC 105 mm 1:2.8 VR S. The 50 mm model is also described as suitable for general subjects.
  • According to Nikon, the Z MC 50 mm has a working distance of around 5 cm at its closest focusing distance. This figure doesn’t apply at every shooting distance.

Sony

E-mount macro options with different focal lengths and maximum reproduction ratios.

  • Sony gives a maximum magnification of 1:1 and a working distance of around 13 cm at the closest focusing distance for the SEL90M28G. The FE 100 mm F2.8 Macro GM OSS is specified as offering magnification of up to 1.4x.
  • The SEL90M28G’s working distance can’t be assumed to apply to the other Sony model. Higher magnification doesn’t mean whole figures will automatically fit better in the frame.

Tamron

The 90mm F/2.8 Di III MACRO VXD is available for Sony E and Nikon Z.

  • Tamron specifies a 1:1 reproduction ratio for this model.
  • When buying, make sure you choose the right mount. Manufacturer claims about sharpness aren’t an independent comparison.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is designed for Micro Four Thirds.

  • OM SYSTEM specifies native 2x magnification for close-ups of very small details.
  • The additional 4x 35 mm equivalent figure uses a different measure and isn’t a native 4:1 reproduction ratio. Maximum magnification isn’t automatically necessary for photographing whole figures.

Related products on Joybuy

Similar products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens to photograph a whole figure?

No. If your existing lens can focus on the framing you want from the available distance, you can start by trying the overall shot with it. 1:1 describes the maximum reproduction ratio and is mainly relevant for smaller details.

How can I get a three-dimensional figure sharp from front to back?

First, check your aperture and exposure. If the depth of field isn’t enough, you can photograph a stationary figure at several focus distances using a stable setup, then combine the shots. Canon Europe describes this technique as focus stacking; whether an automatic function is available depends on your camera and lens combination.

Why does white paper look grey in the photo, or the figure too dark?

A white surface alone won’t determine how bright it looks in the image. Plan the lighting for the background and the figure separately. Canon Germany describes this lighting principle for portraits; it isn’t a ready-made setting for toy figures.

How should I care for my lens after photographing painted figures?

Follow the care instructions for the specific model you bought. Check the recommended cleaning method before using it on the optical surfaces.